Nurdiyantoro Putra Prasetya , Retna Arilasita , Herman Aldila , Nur Aji Wibowo , Riyatun , Utari , Nuryani , Terumitsu Tanaka , Budi Purnama
{"title":"单域构型调节共沉淀蒙脱石装饰钴铁氧体纳米粒子中的高矫顽力场","authors":"Nurdiyantoro Putra Prasetya , Retna Arilasita , Herman Aldila , Nur Aji Wibowo , Riyatun , Utari , Nuryani , Terumitsu Tanaka , Budi Purnama","doi":"10.1016/j.nanoso.2024.101301","DOIUrl":null,"url":null,"abstract":"<div><p>Single-domain configuration is one of the important key in the applied current- technology especially information technology. In order to address this issue, a magnetic modification of cobalt ferrite nanoparticles (CFO-NPs) by decorating the monazite-natural-mineral (Ce) is presented. Monazite-decorated CFO-NPs are successfully synthesized by the co-precipitation method. The obtained nanoparticle samples are annealed at 200 °C, 300 °C, and 400 °C for 5 hours. XRD results confirms the successful decoration of the monazite sand with CFO-NPs, as demonstrated by the distinctive peaks of CFO-NPs, as well as the major peaks of the monazite-sand. The presence of monazite in the CFO-NPs sample was confirmed by the EDS results. With increasing annealing temperature, the crystallite size increases, respectively. FTIR results show that the monazite-decorated CFO-NPs outcome absorption peaks at <em>k</em><sub>t</sub> ∼590/cm and <em>k</em><sub>o</sub> ∼390/cm, which are the original absorptions of CFO-NPs. VSM results showed that the single-domain configuration realized owing high the <em>H</em><sub>C</sub> (supported by <em>K</em><sub>1</sub> and <em>K</em><sub>σ</sub>) for samples without and annealed at 200 °C, whereas the multi-domain configuration appears to have a small <em>H</em><sub>C</sub> (supported only by <em>K</em><sub>1</sub>) for samples annealed at 300 °C and 400 °C. The largest <em>H</em><sub>C</sub> of the monazite-decorated CFO-NPs was obtained with the annealing temperature at 200 °C, i.e., 3.02 kOe, suggesting that it be supported by both the <em>K</em><sub>1</sub> and <em>K</em><sub>σ</sub>. The magnetic properties obtained also indicate the potential for developing permanent magnets.</p></div>","PeriodicalId":397,"journal":{"name":"Nano-Structures & Nano-Objects","volume":"39 ","pages":"Article 101301"},"PeriodicalIF":5.4500,"publicationDate":"2024-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Single-domain configuration tune high coercive field in Co-precipitated monazite-decorated cobalt ferrite nanoparticles\",\"authors\":\"Nurdiyantoro Putra Prasetya , Retna Arilasita , Herman Aldila , Nur Aji Wibowo , Riyatun , Utari , Nuryani , Terumitsu Tanaka , Budi Purnama\",\"doi\":\"10.1016/j.nanoso.2024.101301\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<div><p>Single-domain configuration is one of the important key in the applied current- technology especially information technology. In order to address this issue, a magnetic modification of cobalt ferrite nanoparticles (CFO-NPs) by decorating the monazite-natural-mineral (Ce) is presented. Monazite-decorated CFO-NPs are successfully synthesized by the co-precipitation method. The obtained nanoparticle samples are annealed at 200 °C, 300 °C, and 400 °C for 5 hours. XRD results confirms the successful decoration of the monazite sand with CFO-NPs, as demonstrated by the distinctive peaks of CFO-NPs, as well as the major peaks of the monazite-sand. The presence of monazite in the CFO-NPs sample was confirmed by the EDS results. With increasing annealing temperature, the crystallite size increases, respectively. FTIR results show that the monazite-decorated CFO-NPs outcome absorption peaks at <em>k</em><sub>t</sub> ∼590/cm and <em>k</em><sub>o</sub> ∼390/cm, which are the original absorptions of CFO-NPs. VSM results showed that the single-domain configuration realized owing high the <em>H</em><sub>C</sub> (supported by <em>K</em><sub>1</sub> and <em>K</em><sub>σ</sub>) for samples without and annealed at 200 °C, whereas the multi-domain configuration appears to have a small <em>H</em><sub>C</sub> (supported only by <em>K</em><sub>1</sub>) for samples annealed at 300 °C and 400 °C. The largest <em>H</em><sub>C</sub> of the monazite-decorated CFO-NPs was obtained with the annealing temperature at 200 °C, i.e., 3.02 kOe, suggesting that it be supported by both the <em>K</em><sub>1</sub> and <em>K</em><sub>σ</sub>. The magnetic properties obtained also indicate the potential for developing permanent magnets.</p></div>\",\"PeriodicalId\":397,\"journal\":{\"name\":\"Nano-Structures & Nano-Objects\",\"volume\":\"39 \",\"pages\":\"Article 101301\"},\"PeriodicalIF\":5.4500,\"publicationDate\":\"2024-09-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Nano-Structures & Nano-Objects\",\"FirstCategoryId\":\"1\",\"ListUrlMain\":\"https://www.sciencedirect.com/science/article/pii/S2352507X24002129\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q1\",\"JCRName\":\"Physics and Astronomy\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Nano-Structures & Nano-Objects","FirstCategoryId":"1","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S2352507X24002129","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"Physics and Astronomy","Score":null,"Total":0}
Single-domain configuration tune high coercive field in Co-precipitated monazite-decorated cobalt ferrite nanoparticles
Single-domain configuration is one of the important key in the applied current- technology especially information technology. In order to address this issue, a magnetic modification of cobalt ferrite nanoparticles (CFO-NPs) by decorating the monazite-natural-mineral (Ce) is presented. Monazite-decorated CFO-NPs are successfully synthesized by the co-precipitation method. The obtained nanoparticle samples are annealed at 200 °C, 300 °C, and 400 °C for 5 hours. XRD results confirms the successful decoration of the monazite sand with CFO-NPs, as demonstrated by the distinctive peaks of CFO-NPs, as well as the major peaks of the monazite-sand. The presence of monazite in the CFO-NPs sample was confirmed by the EDS results. With increasing annealing temperature, the crystallite size increases, respectively. FTIR results show that the monazite-decorated CFO-NPs outcome absorption peaks at kt ∼590/cm and ko ∼390/cm, which are the original absorptions of CFO-NPs. VSM results showed that the single-domain configuration realized owing high the HC (supported by K1 and Kσ) for samples without and annealed at 200 °C, whereas the multi-domain configuration appears to have a small HC (supported only by K1) for samples annealed at 300 °C and 400 °C. The largest HC of the monazite-decorated CFO-NPs was obtained with the annealing temperature at 200 °C, i.e., 3.02 kOe, suggesting that it be supported by both the K1 and Kσ. The magnetic properties obtained also indicate the potential for developing permanent magnets.
期刊介绍:
Nano-Structures & Nano-Objects is a new journal devoted to all aspects of the synthesis and the properties of this new flourishing domain. The journal is devoted to novel architectures at the nano-level with an emphasis on new synthesis and characterization methods. The journal is focused on the objects rather than on their applications. However, the research for new applications of original nano-structures & nano-objects in various fields such as nano-electronics, energy conversion, catalysis, drug delivery and nano-medicine is also welcome. The scope of Nano-Structures & Nano-Objects involves: -Metal and alloy nanoparticles with complex nanostructures such as shape control, core-shell and dumbells -Oxide nanoparticles and nanostructures, with complex oxide/metal, oxide/surface and oxide /organic interfaces -Inorganic semi-conducting nanoparticles (quantum dots) with an emphasis on new phases, structures, shapes and complexity -Nanostructures involving molecular inorganic species such as nanoparticles of coordination compounds, molecular magnets, spin transition nanoparticles etc. or organic nano-objects, in particular for molecular electronics -Nanostructured materials such as nano-MOFs and nano-zeolites -Hetero-junctions between molecules and nano-objects, between different nano-objects & nanostructures or between nano-objects & nanostructures and surfaces -Methods of characterization specific of the nano size or adapted for the nano size such as X-ray and neutron scattering, light scattering, NMR, Raman, Plasmonics, near field microscopies, various TEM and SEM techniques, magnetic studies, etc .