Cong Chen , Shuchang Long , Heran Wang , Xiaohu Yao
{"title":"预拉伸对平纹织物冲击响应的影响机制:实验和数值研究","authors":"Cong Chen , Shuchang Long , Heran Wang , Xiaohu Yao","doi":"10.1016/j.ijimpeng.2024.105096","DOIUrl":null,"url":null,"abstract":"<div><p>The fabrics made of high strength and toughness fibers are increasingly used in the structural and individual protection. The research on energy dissipation mechanism and the improvement methods for improving energy dissipation of the fabric under impact, as well as the change of ballistic limit velocity under pre-stress, is relatively mature. However, the transmission mode and velocity of transverse wave in the fabric, as well as the method of accurate finite element simulation is still lacking. In this paper, the transverse impact response of ultra high molecular weight polyethylene (UHMWPE) fabric subjected to fragment impact is studied experimentally and numerically. A novel biaxial pre-tension fixture was developed, and fragment impact test of the fabric in pre-tension state was realized using a gas gun. The displacement-time history of each point on the fabric in three-dimensional space was characterized through 3-D DIC technology, and the process of transverse wave transmission on the fabric after fragment impact was obtained. The calculated results of the finite element model established by truss element agrees reasonably well with the experimental results. The experimental and numerical results indicate that the impact velocity of fragment affects the velocity of transverse wave in the fabric, but does not change its transmission mode. With the increase of pre-tension amount, the propagation mode changes from a cross shape to a rhombic shape and finally to a circular shape, and the wave velocity increases greatly. The wave transmission process in yarns at a mesoscopic level was analyzed through finite element simulation, and the transmission path was determined. It was found that pre-tension accelerated the wave velocity on the stepwise path, causing the transverse wave to reach a farther position in the diagonal direction of the fabric, resulting in different modes of wave transmission. The research content may provide more ways for the application of fabrics in protection.</p></div>","PeriodicalId":50318,"journal":{"name":"International Journal of Impact Engineering","volume":"194 ","pages":"Article 105096"},"PeriodicalIF":5.1000,"publicationDate":"2024-08-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Mechanism of pre-tension on the impact response of plain weave fabric: Experimental and numerical investigation\",\"authors\":\"Cong Chen , Shuchang Long , Heran Wang , Xiaohu Yao\",\"doi\":\"10.1016/j.ijimpeng.2024.105096\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<div><p>The fabrics made of high strength and toughness fibers are increasingly used in the structural and individual protection. The research on energy dissipation mechanism and the improvement methods for improving energy dissipation of the fabric under impact, as well as the change of ballistic limit velocity under pre-stress, is relatively mature. However, the transmission mode and velocity of transverse wave in the fabric, as well as the method of accurate finite element simulation is still lacking. In this paper, the transverse impact response of ultra high molecular weight polyethylene (UHMWPE) fabric subjected to fragment impact is studied experimentally and numerically. A novel biaxial pre-tension fixture was developed, and fragment impact test of the fabric in pre-tension state was realized using a gas gun. The displacement-time history of each point on the fabric in three-dimensional space was characterized through 3-D DIC technology, and the process of transverse wave transmission on the fabric after fragment impact was obtained. The calculated results of the finite element model established by truss element agrees reasonably well with the experimental results. The experimental and numerical results indicate that the impact velocity of fragment affects the velocity of transverse wave in the fabric, but does not change its transmission mode. With the increase of pre-tension amount, the propagation mode changes from a cross shape to a rhombic shape and finally to a circular shape, and the wave velocity increases greatly. The wave transmission process in yarns at a mesoscopic level was analyzed through finite element simulation, and the transmission path was determined. It was found that pre-tension accelerated the wave velocity on the stepwise path, causing the transverse wave to reach a farther position in the diagonal direction of the fabric, resulting in different modes of wave transmission. The research content may provide more ways for the application of fabrics in protection.</p></div>\",\"PeriodicalId\":50318,\"journal\":{\"name\":\"International Journal of Impact Engineering\",\"volume\":\"194 \",\"pages\":\"Article 105096\"},\"PeriodicalIF\":5.1000,\"publicationDate\":\"2024-08-20\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"International Journal of Impact Engineering\",\"FirstCategoryId\":\"5\",\"ListUrlMain\":\"https://www.sciencedirect.com/science/article/pii/S0734743X24002215\",\"RegionNum\":2,\"RegionCategory\":\"工程技术\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q1\",\"JCRName\":\"ENGINEERING, MECHANICAL\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"International Journal of Impact Engineering","FirstCategoryId":"5","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S0734743X24002215","RegionNum":2,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"ENGINEERING, MECHANICAL","Score":null,"Total":0}
Mechanism of pre-tension on the impact response of plain weave fabric: Experimental and numerical investigation
The fabrics made of high strength and toughness fibers are increasingly used in the structural and individual protection. The research on energy dissipation mechanism and the improvement methods for improving energy dissipation of the fabric under impact, as well as the change of ballistic limit velocity under pre-stress, is relatively mature. However, the transmission mode and velocity of transverse wave in the fabric, as well as the method of accurate finite element simulation is still lacking. In this paper, the transverse impact response of ultra high molecular weight polyethylene (UHMWPE) fabric subjected to fragment impact is studied experimentally and numerically. A novel biaxial pre-tension fixture was developed, and fragment impact test of the fabric in pre-tension state was realized using a gas gun. The displacement-time history of each point on the fabric in three-dimensional space was characterized through 3-D DIC technology, and the process of transverse wave transmission on the fabric after fragment impact was obtained. The calculated results of the finite element model established by truss element agrees reasonably well with the experimental results. The experimental and numerical results indicate that the impact velocity of fragment affects the velocity of transverse wave in the fabric, but does not change its transmission mode. With the increase of pre-tension amount, the propagation mode changes from a cross shape to a rhombic shape and finally to a circular shape, and the wave velocity increases greatly. The wave transmission process in yarns at a mesoscopic level was analyzed through finite element simulation, and the transmission path was determined. It was found that pre-tension accelerated the wave velocity on the stepwise path, causing the transverse wave to reach a farther position in the diagonal direction of the fabric, resulting in different modes of wave transmission. The research content may provide more ways for the application of fabrics in protection.
期刊介绍:
The International Journal of Impact Engineering, established in 1983 publishes original research findings related to the response of structures, components and materials subjected to impact, blast and high-rate loading. Areas relevant to the journal encompass the following general topics and those associated with them:
-Behaviour and failure of structures and materials under impact and blast loading
-Systems for protection and absorption of impact and blast loading
-Terminal ballistics
-Dynamic behaviour and failure of materials including plasticity and fracture
-Stress waves
-Structural crashworthiness
-High-rate mechanical and forming processes
-Impact, blast and high-rate loading/measurement techniques and their applications