{"title":"用于蛋白质分离的聚酰胺胺树枝状聚合物改性聚偏氟乙烯微孔膜","authors":"","doi":"10.1016/j.reactfunctpolym.2024.106021","DOIUrl":null,"url":null,"abstract":"<div><p>The separation efficiency of pressure-driven filtration membranes is primarily dictated by the membrane pore size. Membranes with larger pores typically demonstrate high flux but low or zero rejection when it comes to separating small molecules. In protein separation, ultrafiltration (UF) membranes with pore sizes smaller than the molecular dimensions of target proteins are commonly used for size rejection. Taking inspiration from the separation mechanism of nanofiltration (NF) membranes, we hypothesize that introducing charged groups into membranes of appropriate pore sizes could significantly enhance the electrical interaction between membrane charges and protein charges. This enhancement, occurring at the nanoscale distance when protein molecules approach or pass through charged nanoscale membrane channels, may enable the rejection of proteins substantially smaller than the pore size. Using membranes with relatively large pore sizes could lead to an increase in flux. To test this hypothesis, we conducted experiments involving the modification of polyvinylidene fluoride (PVDF) membranes with suitable pore sizes, using polyamidoamine (PAMAM) dendrimers to introduce negative charges to the membranes. The performance of the PVDF membranes and the modified membranes were investigated in the separation of whey proteins. To evaluate the contribution of steric and electrical hindrance to the solute separation, filtration experiments were performed using polyethylene oxide (PEO) and polyacrylic acid (PAA). The membranes were characterized using techniques such as attenuated total reflectance-Fourier transform infrared (ATR-FTIR), X-ray photoelectron spectroscopy (XPS), and scanning electron microscopy (SEM). The results indicate that the modification enhances the rejection efficiency of whey proteins. The whey protein rejection and permeate flux for PVDF membranes were 58.9% and 15.3 LMH, respectively. Following alkaline treatment or PAMAM-G3.5 dendrimer modification, the whey protein rejection increased to 97.3% and 98.8%, respectively. However, alkaline treatment and PAMAM-G3.5 dendrimer modification resulted in a reduction of permeate flux to 5.6 LMH and 2.3 LMH, respectively. This suggests that increasing membrane charge effectively enhances the separation ability of filtration membranes in charged macromolecule separation.</p></div>","PeriodicalId":20916,"journal":{"name":"Reactive & Functional Polymers","volume":null,"pages":null},"PeriodicalIF":4.5000,"publicationDate":"2024-08-05","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://www.sciencedirect.com/science/article/pii/S1381514824001962/pdfft?md5=8613643e74929d756d47f25840bfa69d&pid=1-s2.0-S1381514824001962-main.pdf","citationCount":"0","resultStr":"{\"title\":\"Polyamidoamine dendrimer-modified polyvinylidene fluoride microporous membranes for protein separation\",\"authors\":\"\",\"doi\":\"10.1016/j.reactfunctpolym.2024.106021\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<div><p>The separation efficiency of pressure-driven filtration membranes is primarily dictated by the membrane pore size. Membranes with larger pores typically demonstrate high flux but low or zero rejection when it comes to separating small molecules. In protein separation, ultrafiltration (UF) membranes with pore sizes smaller than the molecular dimensions of target proteins are commonly used for size rejection. Taking inspiration from the separation mechanism of nanofiltration (NF) membranes, we hypothesize that introducing charged groups into membranes of appropriate pore sizes could significantly enhance the electrical interaction between membrane charges and protein charges. This enhancement, occurring at the nanoscale distance when protein molecules approach or pass through charged nanoscale membrane channels, may enable the rejection of proteins substantially smaller than the pore size. Using membranes with relatively large pore sizes could lead to an increase in flux. To test this hypothesis, we conducted experiments involving the modification of polyvinylidene fluoride (PVDF) membranes with suitable pore sizes, using polyamidoamine (PAMAM) dendrimers to introduce negative charges to the membranes. The performance of the PVDF membranes and the modified membranes were investigated in the separation of whey proteins. To evaluate the contribution of steric and electrical hindrance to the solute separation, filtration experiments were performed using polyethylene oxide (PEO) and polyacrylic acid (PAA). The membranes were characterized using techniques such as attenuated total reflectance-Fourier transform infrared (ATR-FTIR), X-ray photoelectron spectroscopy (XPS), and scanning electron microscopy (SEM). The results indicate that the modification enhances the rejection efficiency of whey proteins. The whey protein rejection and permeate flux for PVDF membranes were 58.9% and 15.3 LMH, respectively. Following alkaline treatment or PAMAM-G3.5 dendrimer modification, the whey protein rejection increased to 97.3% and 98.8%, respectively. However, alkaline treatment and PAMAM-G3.5 dendrimer modification resulted in a reduction of permeate flux to 5.6 LMH and 2.3 LMH, respectively. This suggests that increasing membrane charge effectively enhances the separation ability of filtration membranes in charged macromolecule separation.</p></div>\",\"PeriodicalId\":20916,\"journal\":{\"name\":\"Reactive & Functional Polymers\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":4.5000,\"publicationDate\":\"2024-08-05\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"https://www.sciencedirect.com/science/article/pii/S1381514824001962/pdfft?md5=8613643e74929d756d47f25840bfa69d&pid=1-s2.0-S1381514824001962-main.pdf\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Reactive & Functional Polymers\",\"FirstCategoryId\":\"5\",\"ListUrlMain\":\"https://www.sciencedirect.com/science/article/pii/S1381514824001962\",\"RegionNum\":3,\"RegionCategory\":\"工程技术\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q1\",\"JCRName\":\"CHEMISTRY, APPLIED\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Reactive & Functional Polymers","FirstCategoryId":"5","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S1381514824001962","RegionNum":3,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"CHEMISTRY, APPLIED","Score":null,"Total":0}
Polyamidoamine dendrimer-modified polyvinylidene fluoride microporous membranes for protein separation
The separation efficiency of pressure-driven filtration membranes is primarily dictated by the membrane pore size. Membranes with larger pores typically demonstrate high flux but low or zero rejection when it comes to separating small molecules. In protein separation, ultrafiltration (UF) membranes with pore sizes smaller than the molecular dimensions of target proteins are commonly used for size rejection. Taking inspiration from the separation mechanism of nanofiltration (NF) membranes, we hypothesize that introducing charged groups into membranes of appropriate pore sizes could significantly enhance the electrical interaction between membrane charges and protein charges. This enhancement, occurring at the nanoscale distance when protein molecules approach or pass through charged nanoscale membrane channels, may enable the rejection of proteins substantially smaller than the pore size. Using membranes with relatively large pore sizes could lead to an increase in flux. To test this hypothesis, we conducted experiments involving the modification of polyvinylidene fluoride (PVDF) membranes with suitable pore sizes, using polyamidoamine (PAMAM) dendrimers to introduce negative charges to the membranes. The performance of the PVDF membranes and the modified membranes were investigated in the separation of whey proteins. To evaluate the contribution of steric and electrical hindrance to the solute separation, filtration experiments were performed using polyethylene oxide (PEO) and polyacrylic acid (PAA). The membranes were characterized using techniques such as attenuated total reflectance-Fourier transform infrared (ATR-FTIR), X-ray photoelectron spectroscopy (XPS), and scanning electron microscopy (SEM). The results indicate that the modification enhances the rejection efficiency of whey proteins. The whey protein rejection and permeate flux for PVDF membranes were 58.9% and 15.3 LMH, respectively. Following alkaline treatment or PAMAM-G3.5 dendrimer modification, the whey protein rejection increased to 97.3% and 98.8%, respectively. However, alkaline treatment and PAMAM-G3.5 dendrimer modification resulted in a reduction of permeate flux to 5.6 LMH and 2.3 LMH, respectively. This suggests that increasing membrane charge effectively enhances the separation ability of filtration membranes in charged macromolecule separation.
期刊介绍:
Reactive & Functional Polymers provides a forum to disseminate original ideas, concepts and developments in the science and technology of polymers with functional groups, which impart specific chemical reactivity or physical, chemical, structural, biological, and pharmacological functionality. The scope covers organic polymers, acting for instance as reagents, catalysts, templates, ion-exchangers, selective sorbents, chelating or antimicrobial agents, drug carriers, sensors, membranes, and hydrogels. This also includes reactive cross-linkable prepolymers and high-performance thermosetting polymers, natural or degradable polymers, conducting polymers, and porous polymers.
Original research articles must contain thorough molecular and material characterization data on synthesis of the above polymers in combination with their applications. Applications include but are not limited to catalysis, water or effluent treatment, separations and recovery, electronics and information storage, energy conversion, encapsulation, or adhesion.