Yutian Du , Zejian Xu , Caifang Qin , Mengyu Su , P.J. Tan , Fenglei Huang
{"title":"关于不同试样几何形状下 Ti-6Al-4V 的动态剪切破坏","authors":"Yutian Du , Zejian Xu , Caifang Qin , Mengyu Su , P.J. Tan , Fenglei Huang","doi":"10.1016/j.ijsolstr.2024.113036","DOIUrl":null,"url":null,"abstract":"<div><p>In this paper, the dynamic shear response and failure of Ti-6Al-4V using four different test specimen geometries, viz. Hat-Shaped Specimen (HSS), Flat Hat-Shaped Specimen (FHSS), Chip Hat-Shaped Specimen (CHSS) and Double Shear Specimen (DSS), are critically examined and compared. Through a combination of experiments (using the standard Split-Hopkinson Pressure Bar system), finite-element simulations and metallographic examinations of their fracture morphology, the dynamic shear characteristics (strain hardening, strain rate strengthening effect and failure strain) of Ti-6Al-4V obtained using the different specimen geometries are critically examined, compared and analyzed. It will be shown that differences in the stress/strain uniformity, the plastic deformation zone, and the stress state induced by the different specimen geometries lead to discrepancies in the measured shear response and failure that were observed. The shear stress–strain curve obtained using the DSS will be shown to be more precise than the other specimen geometries.</p></div>","PeriodicalId":14311,"journal":{"name":"International Journal of Solids and Structures","volume":"304 ","pages":"Article 113036"},"PeriodicalIF":3.4000,"publicationDate":"2024-08-22","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"On the dynamic shear failure of Ti-6Al-4V in different test specimen geometries\",\"authors\":\"Yutian Du , Zejian Xu , Caifang Qin , Mengyu Su , P.J. Tan , Fenglei Huang\",\"doi\":\"10.1016/j.ijsolstr.2024.113036\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<div><p>In this paper, the dynamic shear response and failure of Ti-6Al-4V using four different test specimen geometries, viz. Hat-Shaped Specimen (HSS), Flat Hat-Shaped Specimen (FHSS), Chip Hat-Shaped Specimen (CHSS) and Double Shear Specimen (DSS), are critically examined and compared. Through a combination of experiments (using the standard Split-Hopkinson Pressure Bar system), finite-element simulations and metallographic examinations of their fracture morphology, the dynamic shear characteristics (strain hardening, strain rate strengthening effect and failure strain) of Ti-6Al-4V obtained using the different specimen geometries are critically examined, compared and analyzed. It will be shown that differences in the stress/strain uniformity, the plastic deformation zone, and the stress state induced by the different specimen geometries lead to discrepancies in the measured shear response and failure that were observed. The shear stress–strain curve obtained using the DSS will be shown to be more precise than the other specimen geometries.</p></div>\",\"PeriodicalId\":14311,\"journal\":{\"name\":\"International Journal of Solids and Structures\",\"volume\":\"304 \",\"pages\":\"Article 113036\"},\"PeriodicalIF\":3.4000,\"publicationDate\":\"2024-08-22\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"International Journal of Solids and Structures\",\"FirstCategoryId\":\"5\",\"ListUrlMain\":\"https://www.sciencedirect.com/science/article/pii/S0020768324003950\",\"RegionNum\":3,\"RegionCategory\":\"工程技术\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q1\",\"JCRName\":\"MECHANICS\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"International Journal of Solids and Structures","FirstCategoryId":"5","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S0020768324003950","RegionNum":3,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"MECHANICS","Score":null,"Total":0}
On the dynamic shear failure of Ti-6Al-4V in different test specimen geometries
In this paper, the dynamic shear response and failure of Ti-6Al-4V using four different test specimen geometries, viz. Hat-Shaped Specimen (HSS), Flat Hat-Shaped Specimen (FHSS), Chip Hat-Shaped Specimen (CHSS) and Double Shear Specimen (DSS), are critically examined and compared. Through a combination of experiments (using the standard Split-Hopkinson Pressure Bar system), finite-element simulations and metallographic examinations of their fracture morphology, the dynamic shear characteristics (strain hardening, strain rate strengthening effect and failure strain) of Ti-6Al-4V obtained using the different specimen geometries are critically examined, compared and analyzed. It will be shown that differences in the stress/strain uniformity, the plastic deformation zone, and the stress state induced by the different specimen geometries lead to discrepancies in the measured shear response and failure that were observed. The shear stress–strain curve obtained using the DSS will be shown to be more precise than the other specimen geometries.
期刊介绍：
The International Journal of Solids and Structures has as its objective the publication and dissemination of original research in Mechanics of Solids and Structures as a field of Applied Science and Engineering. It fosters thus the exchange of ideas among workers in different parts of the world and also among workers who emphasize different aspects of the foundations and applications of the field.
Standing as it does at the cross-roads of Materials Science, Life Sciences, Mathematics, Physics and Engineering Design, the Mechanics of Solids and Structures is experiencing considerable growth as a result of recent technological advances. The Journal, by providing an international medium of communication, is encouraging this growth and is encompassing all aspects of the field from the more classical problems of structural analysis to mechanics of solids continually interacting with other media and including fracture, flow, wave propagation, heat transfer, thermal effects in solids, optimum design methods, model analysis, structural topology and numerical techniques. Interest extends to both inorganic and organic solids and structures.
求助内容：
应助结果提醒方式：
京公网安备 11010802042870号
