Hybrid-resolution facial and dental scanning: a cost-effective approach to utilizing 3D facial data in anterior dental implant restoration.

As digital technology becomes more prevalent in the practice of dental medicine, methods to fully replace 2-dimensional photography and analog devices such as the facebow are still in their infancy. As more practices adopt 3-dimensional (3D) intraoral scanners, effective digital communication of the relationships between the teeth and the face becomes essential. With the high cost of intraoral scanners, the additional expense of a face scanner is not a feasible investment for many practices. This article explores a technique for meshing (lower resolution) facial data obtained from a smartphone-based scanner with high-resolution intraoral scan data. In this approach, the data from a free 3D scanning application on a smartphone and a traditional intraoral scanner are meshed so that high-resolution data are available for intraoral features and lower resolution data are used to capture the gross contours of the face. In this way, a hybrid-resolution composite scan that incorporates all of the data needed to simulate the face and accurately reproduce the teeth is generated without the cost of additional scanning equipment. This article defines a new term, the facial registration scan, for use alongside the familiar digital bite registration obtained with an intraoral scanner. To illustrate the clinical use of the hybrid-resolution scan concept, this article presents a case in which this method was used for the restoration of maxillary anterior implants.