{"title":"经处理的糖木纤维聚合物复合材料的热力学和动力学特性分析","authors":"Savendra Pratap Singh, Chetan Kumar Hirwani","doi":"10.1007/s13233-024-00306-1","DOIUrl":null,"url":null,"abstract":"<p>In this study, treated Saccharum munja fibers were considered in particulate (PC), short and random (SRC) and unidirectional (UDC) form along with AW106 Resin and HV953 Hardener as matrix material. Composite laminates were fabricated using a compression moulding machine. Surface treatment of fibers removes dust, lignin and hemicellulose causing better mechanical and free vibration properties. Tensile and flexural tests show the highest value of strength 170 MPa and 143 MPa in the case of UDC composite while the lowest values have been seen in the case of PC. Addition of munja fiber in epoxy matrix enhances the fiber matrix adhesion bonding. The PC composite shows better value of damping than the SRC and UDC composite. The highest natural frequency 43, 233, 298, 849, 918 and 1440 Hz obtained in the case of UDC irrespective of all modes. The highest water absorption rate has been obtained for the SRC while the lowest value was found for PC. Due to the surface treatment of saccharum munja, water absorption properties also improve. The Thermogravimetric shows better stability of UDC. Surface morphology showing the fiber matrix interaction. ANOVA analysis shows that the experimental results output in the case of tensile and flexural tests are significant.</p><h3 data-test=\"abstract-sub-heading\">Graphical Abstract</h3><p>\nFabrication of Composite Material</p>","PeriodicalId":688,"journal":{"name":"Macromolecular Research","volume":"4 1","pages":""},"PeriodicalIF":2.8000,"publicationDate":"2024-08-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Analysis of thermomechanical and dynamic characteristics of treated saccharum munja fiber polymer composite\",\"authors\":\"Savendra Pratap Singh, Chetan Kumar Hirwani\",\"doi\":\"10.1007/s13233-024-00306-1\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<p>In this study, treated Saccharum munja fibers were considered in particulate (PC), short and random (SRC) and unidirectional (UDC) form along with AW106 Resin and HV953 Hardener as matrix material. Composite laminates were fabricated using a compression moulding machine. Surface treatment of fibers removes dust, lignin and hemicellulose causing better mechanical and free vibration properties. Tensile and flexural tests show the highest value of strength 170 MPa and 143 MPa in the case of UDC composite while the lowest values have been seen in the case of PC. Addition of munja fiber in epoxy matrix enhances the fiber matrix adhesion bonding. The PC composite shows better value of damping than the SRC and UDC composite. The highest natural frequency 43, 233, 298, 849, 918 and 1440 Hz obtained in the case of UDC irrespective of all modes. The highest water absorption rate has been obtained for the SRC while the lowest value was found for PC. Due to the surface treatment of saccharum munja, water absorption properties also improve. The Thermogravimetric shows better stability of UDC. Surface morphology showing the fiber matrix interaction. ANOVA analysis shows that the experimental results output in the case of tensile and flexural tests are significant.</p><h3 data-test=\\\"abstract-sub-heading\\\">Graphical Abstract</h3><p>\\nFabrication of Composite Material</p>\",\"PeriodicalId\":688,\"journal\":{\"name\":\"Macromolecular Research\",\"volume\":\"4 1\",\"pages\":\"\"},\"PeriodicalIF\":2.8000,\"publicationDate\":\"2024-08-07\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Macromolecular Research\",\"FirstCategoryId\":\"5\",\"ListUrlMain\":\"https://doi.org/10.1007/s13233-024-00306-1\",\"RegionNum\":4,\"RegionCategory\":\"工程技术\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q2\",\"JCRName\":\"POLYMER SCIENCE\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Macromolecular Research","FirstCategoryId":"5","ListUrlMain":"https://doi.org/10.1007/s13233-024-00306-1","RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"POLYMER SCIENCE","Score":null,"Total":0}
Analysis of thermomechanical and dynamic characteristics of treated saccharum munja fiber polymer composite
In this study, treated Saccharum munja fibers were considered in particulate (PC), short and random (SRC) and unidirectional (UDC) form along with AW106 Resin and HV953 Hardener as matrix material. Composite laminates were fabricated using a compression moulding machine. Surface treatment of fibers removes dust, lignin and hemicellulose causing better mechanical and free vibration properties. Tensile and flexural tests show the highest value of strength 170 MPa and 143 MPa in the case of UDC composite while the lowest values have been seen in the case of PC. Addition of munja fiber in epoxy matrix enhances the fiber matrix adhesion bonding. The PC composite shows better value of damping than the SRC and UDC composite. The highest natural frequency 43, 233, 298, 849, 918 and 1440 Hz obtained in the case of UDC irrespective of all modes. The highest water absorption rate has been obtained for the SRC while the lowest value was found for PC. Due to the surface treatment of saccharum munja, water absorption properties also improve. The Thermogravimetric shows better stability of UDC. Surface morphology showing the fiber matrix interaction. ANOVA analysis shows that the experimental results output in the case of tensile and flexural tests are significant.
期刊介绍：
Original research on all aspects of polymer science, engineering and technology, including nanotechnology
Presents original research articles on all aspects of polymer science, engineering and technology
Coverage extends to such topics as nanotechnology, biotechnology and information technology
The English-language journal of the Polymer Society of Korea
Macromolecular Research is a scientific journal published monthly by the Polymer Society of Korea. Macromolecular Research publishes original researches on all aspects of polymer science, engineering, and technology as well as new emerging technologies using polymeric materials including nanotechnology, biotechnology, and information technology in forms of Articles, Communications, Notes, Reviews, and Feature articles.
求助内容：
应助结果提醒方式：
京公网安备 11010802042870号
