Mohamed M. Awad , Feras Alhalabi , Faisal Arishi , Abdulhaleem Ateen , Mohammed Alfadel , Refal Saad Albaijan , Abdullah Alshehri , Jukka P. Matinlinna , Amr Fawzy
{"title":"六磷酸肌醇与聚丙烯酸对牙本质特性以及自粘性修复材料与牙本质粘附性的影响","authors":"Mohamed M. Awad , Feras Alhalabi , Faisal Arishi , Abdulhaleem Ateen , Mohammed Alfadel , Refal Saad Albaijan , Abdullah Alshehri , Jukka P. Matinlinna , Amr Fawzy","doi":"10.1016/j.ijadhadh.2024.103804","DOIUrl":null,"url":null,"abstract":"<div><h3>Objective</h3><p>This study evaluated the effect of 2% inositol hexaphosphate (IP6) and 10% polyacrylic acid (PAA) on dentin surface micromorphology, matrix/mineral ratio, microhardness, and resin−dentin shear bond strength (SBS) of a self-adhesive restorative material (Surefil™ One; Dentsply Sirona, Konstanz, Germany).</p></div><div><h3>Materials and methods</h3><p>Human permanent molar mid-coronal dentin discs were either not treated (control), conditioned with 10% PAA (Dentin Conditioner, GC, Tokyo, Japan) for 20 s, or etched with 2% IP6 for 20 s. Dentin surface micromorphology (etching pattern), matrix/mineral ratio, and microhardness were characterized by a scanning electron microscope (SEM), a confocal Raman microscope and a microhardness tester using the Vickers indenter, respectively. Sound molars were cut flat, mounted, surface treated and restored with Surefil™ One, Dentsply. The shear bond strength (SBS) was evaluated using a universal testing machine at 24 h and after 10k thermo-cycles. The failure modes were assessed. One-way and two-way analysis of variance (ANOVA) followed by the Tukey's multiple comparisons test was used for the statistical analysis.</p></div><div><h3>Results</h3><p>IP6 etching resulted in a more aggressive and uniform etching pattern compared with PAA. The mineral/matrix and Vickers microhardness of IP6-etched dentin were significantly less than those of PAA-conditioned dentin. IP6 etching significantly improved the resin−dentin SBS compared with the control group (no treatment) at 24 h and after thermo-cycling. Adhesive failures were the most predominant in all study groups.</p></div><div><h3>Conclusion</h3><p>Inositol hexaphosphate acid etching deteriorated dentin microhardness and resulted in substantial demineralization, however, it eliminated the dentin smear layer completely and created marked micromorphological alteration at dentin surface, significantly increasing the resin−dentin SBS of a self-adhesive restorative material.</p></div>","PeriodicalId":13732,"journal":{"name":"International Journal of Adhesion and Adhesives","volume":"134 ","pages":"Article 103804"},"PeriodicalIF":3.2000,"publicationDate":"2024-07-31","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://www.sciencedirect.com/science/article/pii/S0143749624001866/pdfft?md5=18b4238d6ca9fdbdb43ca6ff684bc534&pid=1-s2.0-S0143749624001866-main.pdf","citationCount":"0","resultStr":"{\"title\":\"Effect of inositol hexaphosphate acid versus polyacrylic acid on dentin properties and adhesion of a self-adhesive restorative material to dentin\",\"authors\":\"Mohamed M. Awad , Feras Alhalabi , Faisal Arishi , Abdulhaleem Ateen , Mohammed Alfadel , Refal Saad Albaijan , Abdullah Alshehri , Jukka P. Matinlinna , Amr Fawzy\",\"doi\":\"10.1016/j.ijadhadh.2024.103804\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<div><h3>Objective</h3><p>This study evaluated the effect of 2% inositol hexaphosphate (IP6) and 10% polyacrylic acid (PAA) on dentin surface micromorphology, matrix/mineral ratio, microhardness, and resin−dentin shear bond strength (SBS) of a self-adhesive restorative material (Surefil™ One; Dentsply Sirona, Konstanz, Germany).</p></div><div><h3>Materials and methods</h3><p>Human permanent molar mid-coronal dentin discs were either not treated (control), conditioned with 10% PAA (Dentin Conditioner, GC, Tokyo, Japan) for 20 s, or etched with 2% IP6 for 20 s. Dentin surface micromorphology (etching pattern), matrix/mineral ratio, and microhardness were characterized by a scanning electron microscope (SEM), a confocal Raman microscope and a microhardness tester using the Vickers indenter, respectively. Sound molars were cut flat, mounted, surface treated and restored with Surefil™ One, Dentsply. The shear bond strength (SBS) was evaluated using a universal testing machine at 24 h and after 10k thermo-cycles. The failure modes were assessed. One-way and two-way analysis of variance (ANOVA) followed by the Tukey's multiple comparisons test was used for the statistical analysis.</p></div><div><h3>Results</h3><p>IP6 etching resulted in a more aggressive and uniform etching pattern compared with PAA. The mineral/matrix and Vickers microhardness of IP6-etched dentin were significantly less than those of PAA-conditioned dentin. IP6 etching significantly improved the resin−dentin SBS compared with the control group (no treatment) at 24 h and after thermo-cycling. Adhesive failures were the most predominant in all study groups.</p></div><div><h3>Conclusion</h3><p>Inositol hexaphosphate acid etching deteriorated dentin microhardness and resulted in substantial demineralization, however, it eliminated the dentin smear layer completely and created marked micromorphological alteration at dentin surface, significantly increasing the resin−dentin SBS of a self-adhesive restorative material.</p></div>\",\"PeriodicalId\":13732,\"journal\":{\"name\":\"International Journal of Adhesion and Adhesives\",\"volume\":\"134 \",\"pages\":\"Article 103804\"},\"PeriodicalIF\":3.2000,\"publicationDate\":\"2024-07-31\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"https://www.sciencedirect.com/science/article/pii/S0143749624001866/pdfft?md5=18b4238d6ca9fdbdb43ca6ff684bc534&pid=1-s2.0-S0143749624001866-main.pdf\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"International Journal of Adhesion and Adhesives\",\"FirstCategoryId\":\"88\",\"ListUrlMain\":\"https://www.sciencedirect.com/science/article/pii/S0143749624001866\",\"RegionNum\":3,\"RegionCategory\":\"材料科学\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q2\",\"JCRName\":\"ENGINEERING, CHEMICAL\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"International Journal of Adhesion and Adhesives","FirstCategoryId":"88","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S0143749624001866","RegionNum":3,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"ENGINEERING, CHEMICAL","Score":null,"Total":0}
Effect of inositol hexaphosphate acid versus polyacrylic acid on dentin properties and adhesion of a self-adhesive restorative material to dentin
Objective
This study evaluated the effect of 2% inositol hexaphosphate (IP6) and 10% polyacrylic acid (PAA) on dentin surface micromorphology, matrix/mineral ratio, microhardness, and resin−dentin shear bond strength (SBS) of a self-adhesive restorative material (Surefil™ One; Dentsply Sirona, Konstanz, Germany).
Materials and methods
Human permanent molar mid-coronal dentin discs were either not treated (control), conditioned with 10% PAA (Dentin Conditioner, GC, Tokyo, Japan) for 20 s, or etched with 2% IP6 for 20 s. Dentin surface micromorphology (etching pattern), matrix/mineral ratio, and microhardness were characterized by a scanning electron microscope (SEM), a confocal Raman microscope and a microhardness tester using the Vickers indenter, respectively. Sound molars were cut flat, mounted, surface treated and restored with Surefil™ One, Dentsply. The shear bond strength (SBS) was evaluated using a universal testing machine at 24 h and after 10k thermo-cycles. The failure modes were assessed. One-way and two-way analysis of variance (ANOVA) followed by the Tukey's multiple comparisons test was used for the statistical analysis.
Results
IP6 etching resulted in a more aggressive and uniform etching pattern compared with PAA. The mineral/matrix and Vickers microhardness of IP6-etched dentin were significantly less than those of PAA-conditioned dentin. IP6 etching significantly improved the resin−dentin SBS compared with the control group (no treatment) at 24 h and after thermo-cycling. Adhesive failures were the most predominant in all study groups.
Conclusion
Inositol hexaphosphate acid etching deteriorated dentin microhardness and resulted in substantial demineralization, however, it eliminated the dentin smear layer completely and created marked micromorphological alteration at dentin surface, significantly increasing the resin−dentin SBS of a self-adhesive restorative material.
期刊介绍：
The International Journal of Adhesion and Adhesives draws together the many aspects of the science and technology of adhesive materials, from fundamental research and development work to industrial applications. Subject areas covered include: interfacial interactions, surface chemistry, methods of testing, accumulation of test data on physical and mechanical properties, environmental effects, new adhesive materials, sealants, design of bonded joints, and manufacturing technology.
求助内容：
应助结果提醒方式：
京公网安备 11010802042870号
