Design of a new modular‐isolated‐forward‐based active snubber cell for power switches

In this paper, a new modular‐isolated‐forward‐based active snubber cell (SC) for power switches is designed. In the proposed new SC, the zero voltage transition (ZVT) technique is implemented with a forward converter although the current counterparts generally use a flyback converter. In the converter with the new SC, the main switch is turned on with ZVT (full zero voltage switching [ZVS]) and turned off with ZVS, the main diode is turned off with zero current switching (ZCS), the auxiliary switch is turned on with ZCS and turned off with ZVS, and the parasitic capacitor energies are recovered. In addition, thanks to the forward converter, it has been possible to minimize the transformer leakage inductance and greatly reduce the current values of devices in the new SC. The new cell is applied to a single‐phase, grid‐connected, T‐type three‐level inverter (T2‐3LI) as an example. A detailed steady‐state analysis of this inverter was made, and the theoretical analysis was confirmed with measurement results taken from a prototype with 100 kHz and 3.3 kW values. Compared to its hard switching (HS) equivalent, in the converter with soft switching (SS) cell, the total circuit loss was reduced from about 248 W to 86 W, thus achieving an increase in the total efficiency from 92.5% to 97.4%.