废气再循环对高压缩比发动机超低硫柴油在常规和 PPCI 状态下燃烧特性的影响

IF 4.3 3区材料科学 Q1 ENGINEERING, ELECTRICAL & ELECTRONIC

ACS Applied Electronic Materials Pub Date : 2024-08-09 DOI:10.3390/en17163950

C. Srivatsa, S. Alam, Bailey Spickler, Chris Depcik

{"title":"废气再循环对高压缩比发动机超低硫柴油在常规和 PPCI 状态下燃烧特性的影响","authors":"C. Srivatsa, S. Alam, Bailey Spickler, Chris Depcik","doi":"10.3390/en17163950","DOIUrl":null,"url":null,"abstract":"Low temperature combustion (LTC) mitigates the nitrogen oxide (NOx) and particulate matter (PM) trade-off in conventional compression ignition engines. Significant research on LTC using partially premixed charge compression ignition (PPCI) has typically reduced the compression ratio of the engine to control combustion phasing and lower peak temperatures. This study investigates LTC using PPCI with a high-compression-ratio (=21.2) engine by varying fuel injection timing (FIT) from 12.5° to 30.0° before top dead center (BTDC) while modulating EGR (0%, 7%, 14%, and 25%). Advancing FIT led to a gradual rise in the equivalence ratio of the mixture, in-cylinder pressure, temperature, and rate of heat release due to energy losses associated with ignition occurring before the end of the compression stroke. PPCI was successfully achieved with minimal performance impact using a combination of FIT advancements in the presence of high rates of EGR. Specifically, fuel injected at 25.0° BTDC and 25% EGR reduced PM emissions by 59% and total hydrocarbons by 25% compared with conventional FIT (12.5°) without EGR. Moreover, carbon monoxide and NOx emissions were comparable across set points. As a result, PPCI using high compression ratios is possible and can lead to greater thermal efficiencies while reducing emissions.","PeriodicalId":3,"journal":{"name":"ACS Applied Electronic Materials","volume":"4 5","pages":""},"PeriodicalIF":4.3000,"publicationDate":"2024-08-09","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Effect of Exhaust Gas Recirculation on Combustion Characteristics of Ultra-Low-Sulfur Diesel in Conventional and PPCI Regimes for a High-Compression-Ratio Engine\",\"authors\":\"C. Srivatsa, S. Alam, Bailey Spickler, Chris Depcik\",\"doi\":\"10.3390/en17163950\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"Low temperature combustion (LTC) mitigates the nitrogen oxide (NOx) and particulate matter (PM) trade-off in conventional compression ignition engines. Significant research on LTC using partially premixed charge compression ignition (PPCI) has typically reduced the compression ratio of the engine to control combustion phasing and lower peak temperatures. This study investigates LTC using PPCI with a high-compression-ratio (=21.2) engine by varying fuel injection timing (FIT) from 12.5° to 30.0° before top dead center (BTDC) while modulating EGR (0%, 7%, 14%, and 25%). Advancing FIT led to a gradual rise in the equivalence ratio of the mixture, in-cylinder pressure, temperature, and rate of heat release due to energy losses associated with ignition occurring before the end of the compression stroke. PPCI was successfully achieved with minimal performance impact using a combination of FIT advancements in the presence of high rates of EGR. Specifically, fuel injected at 25.0° BTDC and 25% EGR reduced PM emissions by 59% and total hydrocarbons by 25% compared with conventional FIT (12.5°) without EGR. Moreover, carbon monoxide and NOx emissions were comparable across set points. As a result, PPCI using high compression ratios is possible and can lead to greater thermal efficiencies while reducing emissions.\",\"PeriodicalId\":3,\"journal\":{\"name\":\"ACS Applied Electronic Materials\",\"volume\":\"4 5\",\"pages\":\"\"},\"PeriodicalIF\":4.3000,\"publicationDate\":\"2024-08-09\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"ACS Applied Electronic Materials\",\"FirstCategoryId\":\"5\",\"ListUrlMain\":\"https://doi.org/10.3390/en17163950\",\"RegionNum\":3,\"RegionCategory\":\"材料科学\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q1\",\"JCRName\":\"ENGINEERING, ELECTRICAL & ELECTRONIC\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"ACS Applied Electronic Materials","FirstCategoryId":"5","ListUrlMain":"https://doi.org/10.3390/en17163950","RegionNum":3,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"ENGINEERING, ELECTRICAL & ELECTRONIC","Score":null,"Total":0}

引用次数: 0

摘要

低温燃烧（LTC）可以缓解传统压燃发动机中氮氧化物（NOx）和颗粒物（PM）的权衡问题。有关使用部分预混合充气压燃（PPCI）进行低温燃烧的重要研究通常会降低发动机的压缩比，以控制燃烧相位和降低峰值温度。本研究调查了使用 PPCI 的高压缩比（=21.2）发动机的 LTC，方法是将燃油喷射正时（FIT）从顶死中心（BTDC）前 12.5° 变为 30.0°，同时调节 EGR（0%、7%、14% 和 25%）。推进 FIT 会导致混合气等效比、气缸内压力、温度和热量释放率逐渐上升，这是因为在压缩冲程结束前点火会造成能量损失。在高 EGR 率的情况下，通过结合使用先进的 FIT 技术，成功实现了 PPCI，并将其对性能的影响降至最低。具体地说，与不使用 EGR 的传统 FIT（12.5°）相比，在 25.0° BTDC 和 25% EGR 下喷射的燃料可使 PM 排放减少 59%，碳氢化合物总量减少 25%。此外，各设定点的一氧化碳和氮氧化物排放量相当。因此，使用高压缩比的 PPCI 是可行的，可以在降低排放的同时提高热效率。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

Effect of Exhaust Gas Recirculation on Combustion Characteristics of Ultra-Low-Sulfur Diesel in Conventional and PPCI Regimes for a High-Compression-Ratio Engine

Low temperature combustion (LTC) mitigates the nitrogen oxide (NOx) and particulate matter (PM) trade-off in conventional compression ignition engines. Significant research on LTC using partially premixed charge compression ignition (PPCI) has typically reduced the compression ratio of the engine to control combustion phasing and lower peak temperatures. This study investigates LTC using PPCI with a high-compression-ratio (=21.2) engine by varying fuel injection timing (FIT) from 12.5° to 30.0° before top dead center (BTDC) while modulating EGR (0%, 7%, 14%, and 25%). Advancing FIT led to a gradual rise in the equivalence ratio of the mixture, in-cylinder pressure, temperature, and rate of heat release due to energy losses associated with ignition occurring before the end of the compression stroke. PPCI was successfully achieved with minimal performance impact using a combination of FIT advancements in the presence of high rates of EGR. Specifically, fuel injected at 25.0° BTDC and 25% EGR reduced PM emissions by 59% and total hydrocarbons by 25% compared with conventional FIT (12.5°) without EGR. Moreover, carbon monoxide and NOx emissions were comparable across set points. As a result, PPCI using high compression ratios is possible and can lead to greater thermal efficiencies while reducing emissions.

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

ACS Applied Electronic Materials Multiple-

CiteScore

7.20

自引率

4.30%

发文量

567

期刊介绍： ACS Applied Electronic Materials is an interdisciplinary journal publishing original research covering all aspects of electronic materials. The journal is devoted to reports of new and original experimental and theoretical research of an applied nature that integrate knowledge in the areas of materials science, engineering, optics, physics, and chemistry into important applications of electronic materials. Sample research topics that span the journal's scope are inorganic, organic, ionic and polymeric materials with properties that include conducting, semiconducting, superconducting, insulating, dielectric, magnetic, optoelectronic, piezoelectric, ferroelectric and thermoelectric. Indexed/Abstracted： Web of Science SCIE Scopus CAS INSPEC Portico