{"title":"利用氯化焙烧从含锌和铅的硫酸残渣中制备氧化颗粒及其脱锌和脱铅机理","authors":"Wei Liu, Jian Pan, Congcong Yang, Deqing Zhu, Zhengqi Guo, Siwei Li","doi":"10.3390/min14080780","DOIUrl":null,"url":null,"abstract":"The utilization of sulfur acid residue is an urgent problem confronting sulfuric acid production enterprises, especially the application of sulfur acid residue (SAR) containing lead and zinc. A method combining chlorination roasting using CaCl2 with pelletizing for processing SAR containing lead and zinc was used in this study, and the effect of calcium chloride on pelletizing performance was studied; in addition, the removal behavior of lead and zinc was also studied by using polarized light microscopy (Zeiss double Axioskop 40A), X ray diffraction, SEM and EDS. The results showed that CaCl2 migrated to the surface of the pellets during drying, and this phenomenon resulted in a lower removal rate of lead and zinc inside the pellets than outside the pellets during the preheating phase. When the roasting temperature was 1220 °C, with an increase in the basicity of pellets, the silicate minerals in the pellets gradually decomposed, the hematite particles were gradually refined, and more lead or zinc minerals were exposed, which further increased the removal rate of lead and zinc in the pellets. Finally, the SAR pellets with Pb and Zn removal rates up to 91.33 and 97.88%, and a compressive strength of 2789 N, could be obtained, which is very beneficial to the sustainable development of sulfuric acid mills.","PeriodicalId":18601,"journal":{"name":"Minerals","volume":null,"pages":null},"PeriodicalIF":2.2000,"publicationDate":"2024-07-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Preparation of Oxidized Pellets from Sulfuric Acid Residue Containing Zinc and Lead by Chlorination Roasting and Its Mechanism of Dezincing and Lead Removal\",\"authors\":\"Wei Liu, Jian Pan, Congcong Yang, Deqing Zhu, Zhengqi Guo, Siwei Li\",\"doi\":\"10.3390/min14080780\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"The utilization of sulfur acid residue is an urgent problem confronting sulfuric acid production enterprises, especially the application of sulfur acid residue (SAR) containing lead and zinc. A method combining chlorination roasting using CaCl2 with pelletizing for processing SAR containing lead and zinc was used in this study, and the effect of calcium chloride on pelletizing performance was studied; in addition, the removal behavior of lead and zinc was also studied by using polarized light microscopy (Zeiss double Axioskop 40A), X ray diffraction, SEM and EDS. The results showed that CaCl2 migrated to the surface of the pellets during drying, and this phenomenon resulted in a lower removal rate of lead and zinc inside the pellets than outside the pellets during the preheating phase. When the roasting temperature was 1220 °C, with an increase in the basicity of pellets, the silicate minerals in the pellets gradually decomposed, the hematite particles were gradually refined, and more lead or zinc minerals were exposed, which further increased the removal rate of lead and zinc in the pellets. Finally, the SAR pellets with Pb and Zn removal rates up to 91.33 and 97.88%, and a compressive strength of 2789 N, could be obtained, which is very beneficial to the sustainable development of sulfuric acid mills.\",\"PeriodicalId\":18601,\"journal\":{\"name\":\"Minerals\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":2.2000,\"publicationDate\":\"2024-07-30\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Minerals\",\"FirstCategoryId\":\"89\",\"ListUrlMain\":\"https://doi.org/10.3390/min14080780\",\"RegionNum\":4,\"RegionCategory\":\"地球科学\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q2\",\"JCRName\":\"GEOCHEMISTRY & GEOPHYSICS\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Minerals","FirstCategoryId":"89","ListUrlMain":"https://doi.org/10.3390/min14080780","RegionNum":4,"RegionCategory":"地球科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"GEOCHEMISTRY & GEOPHYSICS","Score":null,"Total":0}
Preparation of Oxidized Pellets from Sulfuric Acid Residue Containing Zinc and Lead by Chlorination Roasting and Its Mechanism of Dezincing and Lead Removal
The utilization of sulfur acid residue is an urgent problem confronting sulfuric acid production enterprises, especially the application of sulfur acid residue (SAR) containing lead and zinc. A method combining chlorination roasting using CaCl2 with pelletizing for processing SAR containing lead and zinc was used in this study, and the effect of calcium chloride on pelletizing performance was studied; in addition, the removal behavior of lead and zinc was also studied by using polarized light microscopy (Zeiss double Axioskop 40A), X ray diffraction, SEM and EDS. The results showed that CaCl2 migrated to the surface of the pellets during drying, and this phenomenon resulted in a lower removal rate of lead and zinc inside the pellets than outside the pellets during the preheating phase. When the roasting temperature was 1220 °C, with an increase in the basicity of pellets, the silicate minerals in the pellets gradually decomposed, the hematite particles were gradually refined, and more lead or zinc minerals were exposed, which further increased the removal rate of lead and zinc in the pellets. Finally, the SAR pellets with Pb and Zn removal rates up to 91.33 and 97.88%, and a compressive strength of 2789 N, could be obtained, which is very beneficial to the sustainable development of sulfuric acid mills.
期刊介绍:
Minerals (ISSN 2075-163X) is an international open access journal that covers the broad field of mineralogy, economic mineral resources, mineral exploration, innovative mining techniques and advances in mineral processing. It publishes reviews, regular research papers and short notes. Our aim is to encourage scientists to publish their experimental and theoretical results in as much detail as possible. There is no restriction on the length of the papers. The full experimental details must be provided so that the results can be reproduced.