定型装药射流对块石混凝土目标的穿透性能研究

IF 5.1 2区 工程技术 Q1 ENGINEERING, MECHANICAL
{"title":"定型装药射流对块石混凝土目标的穿透性能研究","authors":"","doi":"10.1016/j.ijimpeng.2024.105060","DOIUrl":null,"url":null,"abstract":"<div><p>Experiment and numerical simulation were conducted to investigate the penetration performance of shaped charge jet into block stone concrete targets. The experiment has shown that the jet undergoes deflection and other phenomena during its penetration of block stone concrete. Improvements have been made to the methods used by previous scholars for constructing aggregate particles, resulting in a particle model that more closely resembles the true shape of the aggregate. A novel method for judging the intersection of aggregate particles based on the Plucker coordinate system was proposed. In comparison with traditional methods, this method is not constrained by the shape of aggregate particles. By utilizing dynamic simulation software to replicate aggregate settlement during the production process of concrete targets, a 3D meso-scale model of concrete was successfully established. Numerical simulations were conducted according to the experimental settings, with the results demonstrating good consistency between the experimental and numerical simulations, thus confirming the reliability of the model and methodology presented in this article. Additionally, the numerical simulation results suggest that the aggregate content significantly influences the degree of interference, penetration depth, and damage zone range of the jet, while the impact position primarily affects the deflection of the jet. This article provides a numerical simulation method for future research on the penetration and damage mechanism of shaped charge jet considering the 3D meso-scale model of concrete.</p></div>","PeriodicalId":50318,"journal":{"name":"International Journal of Impact Engineering","volume":null,"pages":null},"PeriodicalIF":5.1000,"publicationDate":"2024-07-24","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Research on the penetration performance of shaped charge jet into block stone concrete targets\",\"authors\":\"\",\"doi\":\"10.1016/j.ijimpeng.2024.105060\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<div><p>Experiment and numerical simulation were conducted to investigate the penetration performance of shaped charge jet into block stone concrete targets. The experiment has shown that the jet undergoes deflection and other phenomena during its penetration of block stone concrete. Improvements have been made to the methods used by previous scholars for constructing aggregate particles, resulting in a particle model that more closely resembles the true shape of the aggregate. A novel method for judging the intersection of aggregate particles based on the Plucker coordinate system was proposed. In comparison with traditional methods, this method is not constrained by the shape of aggregate particles. By utilizing dynamic simulation software to replicate aggregate settlement during the production process of concrete targets, a 3D meso-scale model of concrete was successfully established. Numerical simulations were conducted according to the experimental settings, with the results demonstrating good consistency between the experimental and numerical simulations, thus confirming the reliability of the model and methodology presented in this article. Additionally, the numerical simulation results suggest that the aggregate content significantly influences the degree of interference, penetration depth, and damage zone range of the jet, while the impact position primarily affects the deflection of the jet. This article provides a numerical simulation method for future research on the penetration and damage mechanism of shaped charge jet considering the 3D meso-scale model of concrete.</p></div>\",\"PeriodicalId\":50318,\"journal\":{\"name\":\"International Journal of Impact Engineering\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":5.1000,\"publicationDate\":\"2024-07-24\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"International Journal of Impact Engineering\",\"FirstCategoryId\":\"5\",\"ListUrlMain\":\"https://www.sciencedirect.com/science/article/pii/S0734743X24001842\",\"RegionNum\":2,\"RegionCategory\":\"工程技术\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q1\",\"JCRName\":\"ENGINEERING, MECHANICAL\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"International Journal of Impact Engineering","FirstCategoryId":"5","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S0734743X24001842","RegionNum":2,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"ENGINEERING, MECHANICAL","Score":null,"Total":0}
引用次数: 0

摘要

通过实验和数值模拟研究了定形装药射流对块石混凝土目标的穿透性能。实验表明,射流在穿透块石混凝土的过程中会发生偏转等现象。改进了以往学者构建骨料颗粒的方法,使颗粒模型更接近骨料的真实形状。提出了一种基于普鲁克坐标系判断骨料颗粒交点的新方法。与传统方法相比,该方法不受骨料颗粒形状的限制。通过利用动态模拟软件复制混凝土目标生产过程中的骨料沉降,成功建立了混凝土的三维中尺度模型。根据实验设置进行了数值模拟,结果表明实验和数值模拟之间具有良好的一致性,从而证实了本文所介绍的模型和方法的可靠性。此外,数值模拟结果表明,骨料含量对射流的干涉程度、穿透深度和破坏区范围有显著影响,而冲击位置则主要影响射流的挠度。考虑到混凝土的三维中尺度模型,本文为今后研究定形电荷射流的穿透和破坏机理提供了一种数值模拟方法。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
Research on the penetration performance of shaped charge jet into block stone concrete targets

Experiment and numerical simulation were conducted to investigate the penetration performance of shaped charge jet into block stone concrete targets. The experiment has shown that the jet undergoes deflection and other phenomena during its penetration of block stone concrete. Improvements have been made to the methods used by previous scholars for constructing aggregate particles, resulting in a particle model that more closely resembles the true shape of the aggregate. A novel method for judging the intersection of aggregate particles based on the Plucker coordinate system was proposed. In comparison with traditional methods, this method is not constrained by the shape of aggregate particles. By utilizing dynamic simulation software to replicate aggregate settlement during the production process of concrete targets, a 3D meso-scale model of concrete was successfully established. Numerical simulations were conducted according to the experimental settings, with the results demonstrating good consistency between the experimental and numerical simulations, thus confirming the reliability of the model and methodology presented in this article. Additionally, the numerical simulation results suggest that the aggregate content significantly influences the degree of interference, penetration depth, and damage zone range of the jet, while the impact position primarily affects the deflection of the jet. This article provides a numerical simulation method for future research on the penetration and damage mechanism of shaped charge jet considering the 3D meso-scale model of concrete.

求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
International Journal of Impact Engineering
International Journal of Impact Engineering 工程技术-工程:机械
CiteScore
8.70
自引率
13.70%
发文量
241
审稿时长
52 days
期刊介绍: The International Journal of Impact Engineering, established in 1983 publishes original research findings related to the response of structures, components and materials subjected to impact, blast and high-rate loading. Areas relevant to the journal encompass the following general topics and those associated with them: -Behaviour and failure of structures and materials under impact and blast loading -Systems for protection and absorption of impact and blast loading -Terminal ballistics -Dynamic behaviour and failure of materials including plasticity and fracture -Stress waves -Structural crashworthiness -High-rate mechanical and forming processes -Impact, blast and high-rate loading/measurement techniques and their applications
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信