André Bergmann, Jens Sumpf, Niels Dallinger, Martin Moneke, Markus Golder
{"title":"以 POM ∣ PE-UHMW 和钢∣ PE-UHMW 为例的聚合物摩擦半分析计算模型","authors":"André Bergmann, Jens Sumpf, Niels Dallinger, Martin Moneke, Markus Golder","doi":"10.1007/s40544-024-0887-2","DOIUrl":null,"url":null,"abstract":"<p>In this paper, a semi-analytical calculation model for the coefficient of friction (COF) of single spherical protrusions is presented. It allows the prediction of the deformative friction part (<i>μ</i><sub>def</sub>) and adhesive friction part (<i>μ</i><sub>adh</sub>) of the friction pairings steel ∣ polyethylene with ultra-high molecular weight (PE-UHMW) and polyoxymethylene (POM) ∣ PE-UHMW. The experimental studies included unlubricated friction tests, which served to determine the total COF (<i>μ</i><sub>tot</sub>), as well as tests being lubricated with silicone oil, from which <i>μ</i><sub>def</sub> is obtained. Based on the verification tests, it could be shown that both states of lubrication result in the same deformation and that the relationship between the rear angle (<i>ω</i>) and <i>μ</i><sub>def</sub> postulated in the calculation model is valid. Therefore, friction tests with segmented spheres were carried out, which allow a specific variation of the <i>ω</i>.</p><p>It can be concluded that for both pairings the <i>μ</i><sub>def</sub> is generally of minor significance (approx. 1/3 <i>μ</i><sub>tot</sub>) and the influence of the <i>μ</i><sub>adh</sub> predominates (approx. 2/3 <i>μ</i><sub>tot</sub>) the friction process. Furthermore the <i>μ</i><sub>tot</sub> decreases with increasing contact pressure especially in the low pressure range and depends on the form of motion (continuous and discontinuous).\n</p>","PeriodicalId":12442,"journal":{"name":"Friction","volume":null,"pages":null},"PeriodicalIF":6.3000,"publicationDate":"2024-07-29","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Semi-analytical calculation model for friction of polymers on the example of POM ∣ PE-UHMW and steel ∣ PE-UHMW\",\"authors\":\"André Bergmann, Jens Sumpf, Niels Dallinger, Martin Moneke, Markus Golder\",\"doi\":\"10.1007/s40544-024-0887-2\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<p>In this paper, a semi-analytical calculation model for the coefficient of friction (COF) of single spherical protrusions is presented. It allows the prediction of the deformative friction part (<i>μ</i><sub>def</sub>) and adhesive friction part (<i>μ</i><sub>adh</sub>) of the friction pairings steel ∣ polyethylene with ultra-high molecular weight (PE-UHMW) and polyoxymethylene (POM) ∣ PE-UHMW. The experimental studies included unlubricated friction tests, which served to determine the total COF (<i>μ</i><sub>tot</sub>), as well as tests being lubricated with silicone oil, from which <i>μ</i><sub>def</sub> is obtained. Based on the verification tests, it could be shown that both states of lubrication result in the same deformation and that the relationship between the rear angle (<i>ω</i>) and <i>μ</i><sub>def</sub> postulated in the calculation model is valid. Therefore, friction tests with segmented spheres were carried out, which allow a specific variation of the <i>ω</i>.</p><p>It can be concluded that for both pairings the <i>μ</i><sub>def</sub> is generally of minor significance (approx. 1/3 <i>μ</i><sub>tot</sub>) and the influence of the <i>μ</i><sub>adh</sub> predominates (approx. 2/3 <i>μ</i><sub>tot</sub>) the friction process. Furthermore the <i>μ</i><sub>tot</sub> decreases with increasing contact pressure especially in the low pressure range and depends on the form of motion (continuous and discontinuous).\\n</p>\",\"PeriodicalId\":12442,\"journal\":{\"name\":\"Friction\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":6.3000,\"publicationDate\":\"2024-07-29\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Friction\",\"FirstCategoryId\":\"5\",\"ListUrlMain\":\"https://doi.org/10.1007/s40544-024-0887-2\",\"RegionNum\":1,\"RegionCategory\":\"工程技术\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q1\",\"JCRName\":\"ENGINEERING, MECHANICAL\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Friction","FirstCategoryId":"5","ListUrlMain":"https://doi.org/10.1007/s40544-024-0887-2","RegionNum":1,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"ENGINEERING, MECHANICAL","Score":null,"Total":0}
Semi-analytical calculation model for friction of polymers on the example of POM ∣ PE-UHMW and steel ∣ PE-UHMW
In this paper, a semi-analytical calculation model for the coefficient of friction (COF) of single spherical protrusions is presented. It allows the prediction of the deformative friction part (μdef) and adhesive friction part (μadh) of the friction pairings steel ∣ polyethylene with ultra-high molecular weight (PE-UHMW) and polyoxymethylene (POM) ∣ PE-UHMW. The experimental studies included unlubricated friction tests, which served to determine the total COF (μtot), as well as tests being lubricated with silicone oil, from which μdef is obtained. Based on the verification tests, it could be shown that both states of lubrication result in the same deformation and that the relationship between the rear angle (ω) and μdef postulated in the calculation model is valid. Therefore, friction tests with segmented spheres were carried out, which allow a specific variation of the ω.
It can be concluded that for both pairings the μdef is generally of minor significance (approx. 1/3 μtot) and the influence of the μadh predominates (approx. 2/3 μtot) the friction process. Furthermore the μtot decreases with increasing contact pressure especially in the low pressure range and depends on the form of motion (continuous and discontinuous).
期刊介绍：
Friction is a peer-reviewed international journal for the publication of theoretical and experimental research works related to the friction, lubrication and wear. Original, high quality research papers and review articles on all aspects of tribology are welcome, including, but are not limited to, a variety of topics, such as:
Friction: Origin of friction, Friction theories, New phenomena of friction, Nano-friction, Ultra-low friction, Molecular friction, Ultra-high friction, Friction at high speed, Friction at high temperature or low temperature, Friction at solid/liquid interfaces, Bio-friction, Adhesion, etc.
Lubrication: Superlubricity, Green lubricants, Nano-lubrication, Boundary lubrication, Thin film lubrication, Elastohydrodynamic lubrication, Mixed lubrication, New lubricants, New additives, Gas lubrication, Solid lubrication, etc.
Wear: Wear materials, Wear mechanism, Wear models, Wear in severe conditions, Wear measurement, Wear monitoring, etc.
Surface Engineering: Surface texturing, Molecular films, Surface coatings, Surface modification, Bionic surfaces, etc.
Basic Sciences: Tribology system, Principles of tribology, Thermodynamics of tribo-systems, Micro-fluidics, Thermal stability of tribo-systems, etc.
Friction is an open access journal. It is published quarterly by Tsinghua University Press and Springer, and sponsored by the State Key Laboratory of Tribology (TsinghuaUniversity) and the Tribology Institute of Chinese Mechanical Engineering Society.
求助内容：
应助结果提醒方式：
京公网安备 11010802042870号
