Non-destructive characterization of resistance projection welded joints by ultrasonic and passive magnetic flux density testing

The weld of resistance projection welded joints is not visible from outside. Therefore, visual evaluation is restricted, and visual inspection is not possible at all. So far, the parameters of the welding process are monitored and controlled. In addition, the welds are periodically tested destructively to determine the quality of the welds. No industrial standard has yet been established in the field of non-destructive testing (NDT) for projection welded joints. This study focuses on NDT of projection welds using two different ultrasonic imaging inspection systems and the passive magnetic ux density testing (pMFT) method. The ultrasonic inspection systems commercially available and established in the field of NDT of spot welds. Both systems are originally designed for the NDT of spot welds and not for projection welds. Unlike the ultrasonic systems, the pMFT is still in laboratory status. The method has originally been developed to evaluate spot welds and is also used in this study to evaluate projection welds. The applicability of the investigated systems to projection welding is investigated in order to derive mandatory development steps to achieve reliable results. The pMFT method shows also good results for NDT of spot welds In this contribution, the measurement and evaluation concept of the three NDT systems for projection welded joints is presented. The NDT results are discussed in the context of the corresponding destructive results in terms of tensile forces and fracture areas. Advises for further development of all investigated systems are given.