{"title":"评估单锉系统在修整收缩根管时产生的垂直力","authors":"Abdulmohsen Alfadley, Ahmed Jamleh","doi":"10.1055/s-0044-1786840","DOIUrl":null,"url":null,"abstract":"<p><strong>Objectives: </strong> This study aimed to evaluate the shaping force generated with OneShape (OS) and HyFlex EDM (HEDM) systems designed for single file shaping, in comparison with ProTaper Next (PTN).</p><p><strong>Materials and methods: </strong> Maxillary premolar teeth received access cavity preparation and their canals were shaped with OS, HEDM, or PTN to size 25 according to manufacturer's instructions with consistent pressure on the files to give a gentle \"in-and-out\" movements of 2 mm amplitude. The canal shaping was completed with a total of three insertions. After each insertion, 1% NaOCl irrigation and recapitulation with K-file size 15 were performed. The vertical shaping force was measured using a force gauge (M5-20 Advanced Digital Force Gauge; Mark-10 Corporation, NY).</p><p><strong>Statistical analysis: </strong> The shaping time was analyzed by using a one-way analysis of variance (ANOVA) test and differences between the mean apical and coronal maximum force values were analyzed using the Kruskal-Wallis and Mann-Whitney U tests. The level of significance was set as 0.05.</p><p><strong>Results: </strong> The magnitude of the vertical forces increased with successive advancements of the instruments within the canal. During canal shaping procedures in all groups, the apical and coronal maximum force values of the OS and HEDM ranged from 2.5 to 7.2 N and 1.3 to 2.9 N, respectively. PTN generated the lowest maximum apical forces during the second and third insertions (<i>p</i> < 0.05). HEDM generated significantly less maximum coronal forces than both OS and PTN during the first insertion while the use of OS was associated with the highest amount of force values in the second and third insertions (<i>p</i> < 0.05). In terms of shaping time, no significant differences were detected among the three tested systems (<i>p</i> = 0.606).</p><p><strong>Conclusion: </strong> The tested single file systems were associated with higher shaping forces in the apical direction that were significant in the second and third insertions.</p>","PeriodicalId":12028,"journal":{"name":"European Journal of Dentistry","volume":" ","pages":""},"PeriodicalIF":0.0000,"publicationDate":"2024-07-16","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Assessment of Vertical Force Generated with Single File Systems during Shaping of Constricted Root Canals.\",\"authors\":\"Abdulmohsen Alfadley, Ahmed Jamleh\",\"doi\":\"10.1055/s-0044-1786840\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<p><strong>Objectives: </strong> This study aimed to evaluate the shaping force generated with OneShape (OS) and HyFlex EDM (HEDM) systems designed for single file shaping, in comparison with ProTaper Next (PTN).</p><p><strong>Materials and methods: </strong> Maxillary premolar teeth received access cavity preparation and their canals were shaped with OS, HEDM, or PTN to size 25 according to manufacturer's instructions with consistent pressure on the files to give a gentle \\\"in-and-out\\\" movements of 2 mm amplitude. The canal shaping was completed with a total of three insertions. After each insertion, 1% NaOCl irrigation and recapitulation with K-file size 15 were performed. The vertical shaping force was measured using a force gauge (M5-20 Advanced Digital Force Gauge; Mark-10 Corporation, NY).</p><p><strong>Statistical analysis: </strong> The shaping time was analyzed by using a one-way analysis of variance (ANOVA) test and differences between the mean apical and coronal maximum force values were analyzed using the Kruskal-Wallis and Mann-Whitney U tests. The level of significance was set as 0.05.</p><p><strong>Results: </strong> The magnitude of the vertical forces increased with successive advancements of the instruments within the canal. During canal shaping procedures in all groups, the apical and coronal maximum force values of the OS and HEDM ranged from 2.5 to 7.2 N and 1.3 to 2.9 N, respectively. PTN generated the lowest maximum apical forces during the second and third insertions (<i>p</i> < 0.05). HEDM generated significantly less maximum coronal forces than both OS and PTN during the first insertion while the use of OS was associated with the highest amount of force values in the second and third insertions (<i>p</i> < 0.05). In terms of shaping time, no significant differences were detected among the three tested systems (<i>p</i> = 0.606).</p><p><strong>Conclusion: </strong> The tested single file systems were associated with higher shaping forces in the apical direction that were significant in the second and third insertions.</p>\",\"PeriodicalId\":12028,\"journal\":{\"name\":\"European Journal of Dentistry\",\"volume\":\" \",\"pages\":\"\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2024-07-16\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"European Journal of Dentistry\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1055/s-0044-1786840\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q1\",\"JCRName\":\"Dentistry\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"European Journal of Dentistry","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1055/s-0044-1786840","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"Dentistry","Score":null,"Total":0}
引用次数: 0
摘要
目的：本研究旨在评估OneShape（OS）和HyFlex EDM（HEDM）系统与ProTaper Next（PTN）相比产生的塑形力：对上颌前磨牙进行入路腔预备，并根据制造商的说明使用 OS、HEDM 或 PTN 对它们的牙道进行塑形，尺寸为 25，锉刀上的压力保持一致，以 2 毫米的振幅进行轻柔的 "进出 "运动。总共插入三次，完成了牙槽骨塑形。每次插入后，用 1%的 NaOCl 冲洗，并用 15 号 K 型锉重新覆盖。使用测力计（M5-20 高级数字测力计；纽约 Mark-10 公司）测量垂直成型力：采用单因素方差分析（ANOVA）检验对塑形时间进行分析，采用Kruskal-Wallis检验和Mann-Whitney U检验对根尖和冠状面平均最大力值之间的差异进行分析。显著性水平设定为 0.05：垂直力的大小随着器械在牙槽内的连续推进而增加。在所有组的根管成形过程中，OS 和 HEDM 的根尖和冠状面最大力值分别为 2.5 到 7.2 N 和 1.3 到 2.9 N。PTN在第二次和第三次插入时产生的最大根尖力最小（p p p = 0.606）：结论：测试的单锉系统在第二次和第三次插入时，根尖方向的塑形力较大。
Assessment of Vertical Force Generated with Single File Systems during Shaping of Constricted Root Canals.
Objectives: This study aimed to evaluate the shaping force generated with OneShape (OS) and HyFlex EDM (HEDM) systems designed for single file shaping, in comparison with ProTaper Next (PTN).
Materials and methods: Maxillary premolar teeth received access cavity preparation and their canals were shaped with OS, HEDM, or PTN to size 25 according to manufacturer's instructions with consistent pressure on the files to give a gentle "in-and-out" movements of 2 mm amplitude. The canal shaping was completed with a total of three insertions. After each insertion, 1% NaOCl irrigation and recapitulation with K-file size 15 were performed. The vertical shaping force was measured using a force gauge (M5-20 Advanced Digital Force Gauge; Mark-10 Corporation, NY).
Statistical analysis: The shaping time was analyzed by using a one-way analysis of variance (ANOVA) test and differences between the mean apical and coronal maximum force values were analyzed using the Kruskal-Wallis and Mann-Whitney U tests. The level of significance was set as 0.05.
Results: The magnitude of the vertical forces increased with successive advancements of the instruments within the canal. During canal shaping procedures in all groups, the apical and coronal maximum force values of the OS and HEDM ranged from 2.5 to 7.2 N and 1.3 to 2.9 N, respectively. PTN generated the lowest maximum apical forces during the second and third insertions (p < 0.05). HEDM generated significantly less maximum coronal forces than both OS and PTN during the first insertion while the use of OS was associated with the highest amount of force values in the second and third insertions (p < 0.05). In terms of shaping time, no significant differences were detected among the three tested systems (p = 0.606).
Conclusion: The tested single file systems were associated with higher shaping forces in the apical direction that were significant in the second and third insertions.
期刊介绍：
The European Journal of Dentistry is the official journal of the Dental Investigations Society, based in Turkey. It is a double-blinded peer-reviewed, Open Access, multi-disciplinary international journal addressing various aspects of dentistry. The journal''s board consists of eminent investigators in dentistry from across the globe and presents an ideal international composition. The journal encourages its authors to submit original investigations, reviews, and reports addressing various divisions of dentistry including oral pathology, prosthodontics, endodontics, orthodontics etc. It is available both online and in print.
求助内容：
应助结果提醒方式：
京公网安备 11010802042870号
