Enhancement of acoustic cavitation streaming: A study on surface finishing of additively manufactured components

Due to the poor surface characteristics of additively manufactured parts, the necessity for post-process surface enhancement is crucial. Among the prevalent post-processing techniques, the acoustic cavitation-based surface finishing technique has recently emerged. Despite a considerable amount of focused research on the material removal mechanisms of this technique, less attention has been devoted to addressing its limitations associated with enhancing the process capability towards achieving a better surface finish. The driving force behind the acoustic cavitation technique is the bubble implosion through cavitation streaming, and the cessation of the acoustic cavitation streaming beyond a certain length is the main limitation. It has restrained the process capability towards finishing both external and internal surfaces. Hence, this research aims to unravel novel ways of employing the acoustic cavitation-generating parameters and achieving better-quality surface finishing of additively manufactured (AM) components. A study has been conducted on different AM materials, including Inconel 625 and aluminum alloy, by introducing various methods associated with acoustic amplitude, working mediums, temperature, and external vibration. The results reveal a significant reduction in average surface roughness for both materials. The topographical and morphological observations confirm the qualitative improvement on the surfaces. In addition, the conical bubble structures that frame the acoustic cavitation streaming are elucidated by implementing high-speed imaging techniques, and their enhancement at different parametric conditions is delineated. Henceforth, the findings suggest a notable insight into the potential of the employed approaches in enhancing the acoustic cavitation streaming for achieving a better surface finish of AM components.