{"title":"CFRP 混凝土界面的动态剪切行为:试验和三维中尺度数值模拟","authors":"Hao Wu, Siyu Lu, De Chen","doi":"10.1016/j.ijimpeng.2024.105045","DOIUrl":null,"url":null,"abstract":"<div><p>The study on dynamic shear behavior of fiber reinforced polymer (FRP)-concrete interface is of great significance for the performance evaluation and design of FRP externally strengthened concrete structures. Firstly, the quasi-static and dynamic single shear test on the interfacial shear behavior between carbon fiber reinforced polymer (CFRP) sheet and concrete substrate was carried out. The corresponding failure modes of CFRP-concrete interface, CFRP strain-time histories, load-displacement curves, and interfacial shear stress-slip relationships under loading rates of 8.33 × 10<sup>−6</sup>–10 m·s<sup>−1</sup> were obtained. It was indicated that the dynamic interfacial shear behaviors, i.e., interfacial failure mode, debonding load, interfacial shear stress, etc., were sensitive to loading rates. Then, a 3D mesoscale modeling approach of concrete with random shaped, sized, and spatially distributed convex polyhedron aggregates was proposed, in which the volume fraction of aggregates was adjustable within the range of 0–50 % through gravitational drop and size scaling of aggregates. Furthermore, based on the established 3D mesoscale concrete model and the zero-thickness cohesive elements for adhesive layer, numerical simulations for FPR-concrete interfacial shear behavior were conducted and validated by comparing with the present and existing quasit-static and dynamic single shear tests. The experimental phenomenon of the failure location transferring from concrete substrate to adhesive layer at high loading rates was numerically reproduced. Finally, the influences of strain rate enhancing effects of aggregates and mortar on the interfacial failure modes were discussed. It was revealed that the failure location transferring from the concrete substrate to the adhesive layer was significantly affected by the strength enhancement of mortar and aggregates with the loading rate increasing.</p></div>","PeriodicalId":50318,"journal":{"name":"International Journal of Impact Engineering","volume":null,"pages":null},"PeriodicalIF":5.1000,"publicationDate":"2024-07-06","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Dynamic shear behavior of CFRP-concrete interface: Test and 3D mesoscale numerical simulation\",\"authors\":\"Hao Wu, Siyu Lu, De Chen\",\"doi\":\"10.1016/j.ijimpeng.2024.105045\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<div><p>The study on dynamic shear behavior of fiber reinforced polymer (FRP)-concrete interface is of great significance for the performance evaluation and design of FRP externally strengthened concrete structures. Firstly, the quasi-static and dynamic single shear test on the interfacial shear behavior between carbon fiber reinforced polymer (CFRP) sheet and concrete substrate was carried out. The corresponding failure modes of CFRP-concrete interface, CFRP strain-time histories, load-displacement curves, and interfacial shear stress-slip relationships under loading rates of 8.33 × 10<sup>−6</sup>–10 m·s<sup>−1</sup> were obtained. It was indicated that the dynamic interfacial shear behaviors, i.e., interfacial failure mode, debonding load, interfacial shear stress, etc., were sensitive to loading rates. Then, a 3D mesoscale modeling approach of concrete with random shaped, sized, and spatially distributed convex polyhedron aggregates was proposed, in which the volume fraction of aggregates was adjustable within the range of 0–50 % through gravitational drop and size scaling of aggregates. Furthermore, based on the established 3D mesoscale concrete model and the zero-thickness cohesive elements for adhesive layer, numerical simulations for FPR-concrete interfacial shear behavior were conducted and validated by comparing with the present and existing quasit-static and dynamic single shear tests. The experimental phenomenon of the failure location transferring from concrete substrate to adhesive layer at high loading rates was numerically reproduced. Finally, the influences of strain rate enhancing effects of aggregates and mortar on the interfacial failure modes were discussed. It was revealed that the failure location transferring from the concrete substrate to the adhesive layer was significantly affected by the strength enhancement of mortar and aggregates with the loading rate increasing.</p></div>\",\"PeriodicalId\":50318,\"journal\":{\"name\":\"International Journal of Impact Engineering\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":5.1000,\"publicationDate\":\"2024-07-06\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"International Journal of Impact Engineering\",\"FirstCategoryId\":\"5\",\"ListUrlMain\":\"https://www.sciencedirect.com/science/article/pii/S0734743X24001696\",\"RegionNum\":2,\"RegionCategory\":\"工程技术\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q1\",\"JCRName\":\"ENGINEERING, MECHANICAL\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"International Journal of Impact Engineering","FirstCategoryId":"5","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S0734743X24001696","RegionNum":2,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"ENGINEERING, MECHANICAL","Score":null,"Total":0}
Dynamic shear behavior of CFRP-concrete interface: Test and 3D mesoscale numerical simulation
The study on dynamic shear behavior of fiber reinforced polymer (FRP)-concrete interface is of great significance for the performance evaluation and design of FRP externally strengthened concrete structures. Firstly, the quasi-static and dynamic single shear test on the interfacial shear behavior between carbon fiber reinforced polymer (CFRP) sheet and concrete substrate was carried out. The corresponding failure modes of CFRP-concrete interface, CFRP strain-time histories, load-displacement curves, and interfacial shear stress-slip relationships under loading rates of 8.33 × 10−6–10 m·s−1 were obtained. It was indicated that the dynamic interfacial shear behaviors, i.e., interfacial failure mode, debonding load, interfacial shear stress, etc., were sensitive to loading rates. Then, a 3D mesoscale modeling approach of concrete with random shaped, sized, and spatially distributed convex polyhedron aggregates was proposed, in which the volume fraction of aggregates was adjustable within the range of 0–50 % through gravitational drop and size scaling of aggregates. Furthermore, based on the established 3D mesoscale concrete model and the zero-thickness cohesive elements for adhesive layer, numerical simulations for FPR-concrete interfacial shear behavior were conducted and validated by comparing with the present and existing quasit-static and dynamic single shear tests. The experimental phenomenon of the failure location transferring from concrete substrate to adhesive layer at high loading rates was numerically reproduced. Finally, the influences of strain rate enhancing effects of aggregates and mortar on the interfacial failure modes were discussed. It was revealed that the failure location transferring from the concrete substrate to the adhesive layer was significantly affected by the strength enhancement of mortar and aggregates with the loading rate increasing.
期刊介绍:
The International Journal of Impact Engineering, established in 1983 publishes original research findings related to the response of structures, components and materials subjected to impact, blast and high-rate loading. Areas relevant to the journal encompass the following general topics and those associated with them:
-Behaviour and failure of structures and materials under impact and blast loading
-Systems for protection and absorption of impact and blast loading
-Terminal ballistics
-Dynamic behaviour and failure of materials including plasticity and fracture
-Stress waves
-Structural crashworthiness
-High-rate mechanical and forming processes
-Impact, blast and high-rate loading/measurement techniques and their applications