Strain‐Engineered Unified SiNx Deposition for Device Passivation and Capacitance Dielectric in GaN Monolithic Microwave Integrated Circuit

Silicon nitride (SiNx) is used for device passivation and capacitance dielectric in GaN monolithic microwave integrated circuits. However, this is a conflicting requirement as passivation requires SiNx to cause tensile strain, and capacitance dielectric primarily demands a high breakdown voltage and large dielectric constant for SiNx, leading to a damaged AlGaN surface during deposition. Two independent SiNx depositions under two different conditions (silicon‐ and nitrogen‐rich) are usually carried out to meet both requirements. Herein, a solution for a unified deposition through interfacial strain analysis on an AlGaN/GaN heterostructure grown on 6H‐SiC imposed by thin film silicon nitride (SiNx), deposited using inductively coupled plasma chemical vapor deposition system is proposed. The strain analysis is done using Raman spectroscopy. The surface morphology of the SiNx is studied using atomic force microscopy. The breakdown characteristics are ascertained from measurements on high electron mobility transistors and metal–insulator–metal capacitors.