{"title":"采用不同针脚几何形状的直列式和交错式设计热交换器的强制对流传热实验研究","authors":"Furkan Parlak , Ahmet Ali Sertkaya","doi":"10.1016/j.ijheatmasstransfer.2024.125892","DOIUrl":null,"url":null,"abstract":"<div><p>In this study, the effects of forced convection heat transfer on the surfaces of pin plate heat exchangers with different geometries modified to the heat exchanger form were experimentally investigated. A total of 8 pin fin plate heat exchangers, four of which are staggered and the other four are in-line, were used in the experiments. The heat transfer surface areas of the pin plate heat exchangers are produced equally. The only difference is their geometry, which is produced in four different shapes: triangle, circle, ellipse and square. The experiments were carried out at air velocities of 1 to 6 m/s with 1 m/s increments and at 10 W and 50 W input powers with 10 W increments. The staggered configuration of the pin fin plates demonstrated high performance in heat transfer. The study found that heat exchangers with cornerless pin plates have lower heat transfer compared to those with cornered pin plates. The pressure drops increased as the velocity of the coolant air increased, and the highest-pressure drop was observed in staggered triangular and elliptical pin plate heat exchangers. This research is considered innovative as it involves an experimental comparison between staggered and in-line pin plate heat exchangers in four different geometries, all with equal surface area.</p></div>","PeriodicalId":336,"journal":{"name":"International Journal of Heat and Mass Transfer","volume":null,"pages":null},"PeriodicalIF":5.0000,"publicationDate":"2024-07-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Experimental investigation of forced convection heat transfer of heat exchangers with different pin geometries in in-line and staggered design\",\"authors\":\"Furkan Parlak , Ahmet Ali Sertkaya\",\"doi\":\"10.1016/j.ijheatmasstransfer.2024.125892\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<div><p>In this study, the effects of forced convection heat transfer on the surfaces of pin plate heat exchangers with different geometries modified to the heat exchanger form were experimentally investigated. A total of 8 pin fin plate heat exchangers, four of which are staggered and the other four are in-line, were used in the experiments. The heat transfer surface areas of the pin plate heat exchangers are produced equally. The only difference is their geometry, which is produced in four different shapes: triangle, circle, ellipse and square. The experiments were carried out at air velocities of 1 to 6 m/s with 1 m/s increments and at 10 W and 50 W input powers with 10 W increments. The staggered configuration of the pin fin plates demonstrated high performance in heat transfer. The study found that heat exchangers with cornerless pin plates have lower heat transfer compared to those with cornered pin plates. The pressure drops increased as the velocity of the coolant air increased, and the highest-pressure drop was observed in staggered triangular and elliptical pin plate heat exchangers. This research is considered innovative as it involves an experimental comparison between staggered and in-line pin plate heat exchangers in four different geometries, all with equal surface area.</p></div>\",\"PeriodicalId\":336,\"journal\":{\"name\":\"International Journal of Heat and Mass Transfer\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":5.0000,\"publicationDate\":\"2024-07-04\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"International Journal of Heat and Mass Transfer\",\"FirstCategoryId\":\"5\",\"ListUrlMain\":\"https://www.sciencedirect.com/science/article/pii/S0017931024007233\",\"RegionNum\":2,\"RegionCategory\":\"工程技术\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q1\",\"JCRName\":\"ENGINEERING, MECHANICAL\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"International Journal of Heat and Mass Transfer","FirstCategoryId":"5","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S0017931024007233","RegionNum":2,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"ENGINEERING, MECHANICAL","Score":null,"Total":0}
Experimental investigation of forced convection heat transfer of heat exchangers with different pin geometries in in-line and staggered design
In this study, the effects of forced convection heat transfer on the surfaces of pin plate heat exchangers with different geometries modified to the heat exchanger form were experimentally investigated. A total of 8 pin fin plate heat exchangers, four of which are staggered and the other four are in-line, were used in the experiments. The heat transfer surface areas of the pin plate heat exchangers are produced equally. The only difference is their geometry, which is produced in four different shapes: triangle, circle, ellipse and square. The experiments were carried out at air velocities of 1 to 6 m/s with 1 m/s increments and at 10 W and 50 W input powers with 10 W increments. The staggered configuration of the pin fin plates demonstrated high performance in heat transfer. The study found that heat exchangers with cornerless pin plates have lower heat transfer compared to those with cornered pin plates. The pressure drops increased as the velocity of the coolant air increased, and the highest-pressure drop was observed in staggered triangular and elliptical pin plate heat exchangers. This research is considered innovative as it involves an experimental comparison between staggered and in-line pin plate heat exchangers in four different geometries, all with equal surface area.
期刊介绍:
International Journal of Heat and Mass Transfer is the vehicle for the exchange of basic ideas in heat and mass transfer between research workers and engineers throughout the world. It focuses on both analytical and experimental research, with an emphasis on contributions which increase the basic understanding of transfer processes and their application to engineering problems.
Topics include:
-New methods of measuring and/or correlating transport-property data
-Energy engineering
-Environmental applications of heat and/or mass transfer