{"title":"由空腔中的非均匀辐射内部热源驱动的对流:液态靶中医用同位素生产实例","authors":"Mona Rahmani, D. Mark Martinez","doi":"10.1016/j.ijheatmasstransfer.2024.125872","DOIUrl":null,"url":null,"abstract":"<div><p>In the present study we use two-dimensional direct numerical simulations (DNS) to understand the coupled heat transfer to fluid flow in a liquid target for the production of nuclear medicines. Fluid motion is driven by buoyancy created by heat generated by a proton beam. The internal heat source has a gaussian distribution in the vertical direction and a rapidly growing intensity in the horizontal direction until it reaches a range at the Bragg peak where the heating drops to zero. The structure of the heating imposes two convective cells, separated at the location of the range. We solve the governing fluid flow and energy equations in a square cavity subject to highly nonuniform internal heating generated by the energy deposition of a proton beam. While most studies of convection driven by an internal heat source in a fluid layer have been focused on a uniform heating of the fluid, our study shows that the nonuniformity in the heat source has important implications for the temperature and flow fields, the boundary heat fluxes, and the growth of convective instabilities in the flow. Interestingly, the scalings of the maximum and averaged temperatures with the Rayleigh number compare similarly to previously found power laws for uniformly heated fluid layers. At higher power levels, the layer of fluid near the top cold boundary becomes convectively unstable via Rayleigh–Taylor instabilities. By comparing the rate of growth of these instabilities to their rate of advection to the boundaries of the cavity, a model is developed that predicts the instability of the convective cells for different values of the range of the beam and the Rayleigh number. Crucially, we demonstrate that the disturbances in the production of isotopes due to convective instabilities and the design of the cooling system is dependent on the location of the Bragg peak and must be considered in design of future generation of this class of target.</p></div>","PeriodicalId":336,"journal":{"name":"International Journal of Heat and Mass Transfer","volume":null,"pages":null},"PeriodicalIF":5.0000,"publicationDate":"2024-06-27","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://www.sciencedirect.com/science/article/pii/S0017931024007038/pdfft?md5=15f1bd1c7ed7784342c44d4bdbc09e8d&pid=1-s2.0-S0017931024007038-main.pdf","citationCount":"0","resultStr":"{\"title\":\"Convection driven by a nonuniform radiative internal heat source in a cavity: Example of medical isotope production in liquid targets\",\"authors\":\"Mona Rahmani, D. Mark Martinez\",\"doi\":\"10.1016/j.ijheatmasstransfer.2024.125872\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<div><p>In the present study we use two-dimensional direct numerical simulations (DNS) to understand the coupled heat transfer to fluid flow in a liquid target for the production of nuclear medicines. Fluid motion is driven by buoyancy created by heat generated by a proton beam. The internal heat source has a gaussian distribution in the vertical direction and a rapidly growing intensity in the horizontal direction until it reaches a range at the Bragg peak where the heating drops to zero. The structure of the heating imposes two convective cells, separated at the location of the range. We solve the governing fluid flow and energy equations in a square cavity subject to highly nonuniform internal heating generated by the energy deposition of a proton beam. While most studies of convection driven by an internal heat source in a fluid layer have been focused on a uniform heating of the fluid, our study shows that the nonuniformity in the heat source has important implications for the temperature and flow fields, the boundary heat fluxes, and the growth of convective instabilities in the flow. Interestingly, the scalings of the maximum and averaged temperatures with the Rayleigh number compare similarly to previously found power laws for uniformly heated fluid layers. At higher power levels, the layer of fluid near the top cold boundary becomes convectively unstable via Rayleigh–Taylor instabilities. By comparing the rate of growth of these instabilities to their rate of advection to the boundaries of the cavity, a model is developed that predicts the instability of the convective cells for different values of the range of the beam and the Rayleigh number. Crucially, we demonstrate that the disturbances in the production of isotopes due to convective instabilities and the design of the cooling system is dependent on the location of the Bragg peak and must be considered in design of future generation of this class of target.</p></div>\",\"PeriodicalId\":336,\"journal\":{\"name\":\"International Journal of Heat and Mass Transfer\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":5.0000,\"publicationDate\":\"2024-06-27\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"https://www.sciencedirect.com/science/article/pii/S0017931024007038/pdfft?md5=15f1bd1c7ed7784342c44d4bdbc09e8d&pid=1-s2.0-S0017931024007038-main.pdf\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"International Journal of Heat and Mass Transfer\",\"FirstCategoryId\":\"5\",\"ListUrlMain\":\"https://www.sciencedirect.com/science/article/pii/S0017931024007038\",\"RegionNum\":2,\"RegionCategory\":\"工程技术\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q1\",\"JCRName\":\"ENGINEERING, MECHANICAL\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"International Journal of Heat and Mass Transfer","FirstCategoryId":"5","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S0017931024007038","RegionNum":2,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"ENGINEERING, MECHANICAL","Score":null,"Total":0}
Convection driven by a nonuniform radiative internal heat source in a cavity: Example of medical isotope production in liquid targets
In the present study we use two-dimensional direct numerical simulations (DNS) to understand the coupled heat transfer to fluid flow in a liquid target for the production of nuclear medicines. Fluid motion is driven by buoyancy created by heat generated by a proton beam. The internal heat source has a gaussian distribution in the vertical direction and a rapidly growing intensity in the horizontal direction until it reaches a range at the Bragg peak where the heating drops to zero. The structure of the heating imposes two convective cells, separated at the location of the range. We solve the governing fluid flow and energy equations in a square cavity subject to highly nonuniform internal heating generated by the energy deposition of a proton beam. While most studies of convection driven by an internal heat source in a fluid layer have been focused on a uniform heating of the fluid, our study shows that the nonuniformity in the heat source has important implications for the temperature and flow fields, the boundary heat fluxes, and the growth of convective instabilities in the flow. Interestingly, the scalings of the maximum and averaged temperatures with the Rayleigh number compare similarly to previously found power laws for uniformly heated fluid layers. At higher power levels, the layer of fluid near the top cold boundary becomes convectively unstable via Rayleigh–Taylor instabilities. By comparing the rate of growth of these instabilities to their rate of advection to the boundaries of the cavity, a model is developed that predicts the instability of the convective cells for different values of the range of the beam and the Rayleigh number. Crucially, we demonstrate that the disturbances in the production of isotopes due to convective instabilities and the design of the cooling system is dependent on the location of the Bragg peak and must be considered in design of future generation of this class of target.
期刊介绍:
International Journal of Heat and Mass Transfer is the vehicle for the exchange of basic ideas in heat and mass transfer between research workers and engineers throughout the world. It focuses on both analytical and experimental research, with an emphasis on contributions which increase the basic understanding of transfer processes and their application to engineering problems.
Topics include:
-New methods of measuring and/or correlating transport-property data
-Energy engineering
-Environmental applications of heat and/or mass transfer