“Honeycomb” Photothermal Lubricated Porous Foam with Low-Temperature, Weak-Light, Anti-Icing/Deicing, and Long-Lasting Lubrication Properties

The prevalence of icing in nature has become a significant threat to human work and life, prompting the development of more energy-efficient active/passive combination anti-icing/deicing technologies. In order to overcome the disadvantage of the poor durability of superhydrophobic surfaces, lubricated surfaces inspired by nepenthes have been preferred. In this study, a paraffin and silicone oil-infused photothermal foam (PSIPF) with excellent overall performance was prepared using polypyrrole (PPy) as a photothermal conversion material, a mixture of silicone oil and paraffin as a lubricating fluid, and melamine foam (MF) as a carrier. The surface adhesive strength is less than 20 kPa at −20 °C, the melting time is only 1018 s at an irradiance of 200 W/m² and −20 °C (0.2 sun), and surface droplets do not freeze within 1 h at −10 °C. Furthermore, the surface exhibits excellent mechanical durability and stability, maintaining optimal lubrication properties following repeated cycles of icing/deicing, water rinsing, and immersion for 2 days in acid and alkaline conditions. This photothermal lubricated surface with excellent anti-icing/deicing properties at low temperatures and in weak-light environments provides a wider range of applications for equipment at high latitudes and high altitudes.