Chassis concept of the individually steerable five-link suspension: a novel approach to maximize the road wheel angle to improve vehicle agility

The Institute of Vehicle Systems Engineering at Ulm University of Applied Sciences is currently developing the autonomous concept vehicle Nimbulus-e in the strategic field “Intelligent Commercial Vehicles” with the aim of maneuvering as agilely as possible in confined spaces. To achieve high agility under the conditions mentioned, large road wheel steering angles are necessary. As part of the basic vehicle concept, the first step is to select a suitable chassis for this purpose. Conventional suspensions cannot be applied due to the mechanical connection of the tie rod to the steering knuckle limiting the road wheel angles. Therefore, the approaches published so far for individual chassis concepts with large steering angles are analyzed and evaluated for use. In this paper, the concept of a novel individually steerable five-link suspension is described. The concept includes a vehicle body mounted steering actuator connected to the chassis via a self-locking worm gear. Due to the body mounted connection of the steering actuator, it does not contribute to the unsprung mass. An analysis of the kinematic and elastokinematic properties and the achievable road wheel steering angle is presented. In the Nimbulus e concept vehicle, the individually steerable corner module is used on both the front and the rear axle. The system is driven by four wheel hub motors. This means that eight control variables are available for the vehicle.