{"title":"快速可靠地电化学检测热敏纸中的双酚 S","authors":"Jelena Vujančević , Neža Sodnik , Anja Korent , Špela Črešnovar , Polonca Trebše , Mojca Bavcon Kralj , Mitja Martelanc , Zoran Samardžija , Kristina Žagar Soderžnik","doi":"10.1016/j.sbsr.2024.100662","DOIUrl":null,"url":null,"abstract":"<div><p>Bisphenol S (BPS) is a common, persistent, and mobile chemical found in everyday products such as thermal paper. BPS can easily enter the body by migrating from the paper to the fingers, disrupting the endocrine system by mimicking the oestrogen hormone, thus negatively influencing human health. Assessing BPS levels in daily life is of great importance. This study introduces a rapid and reliable approach for detecting BPS in thermal paper and tap water by developing an electrochemical analytical method. This method allows for in-situ, real-time measurements. We present a simple, low-cost electrochemical sensor for detecting BPS using screen-printed electrodes based on carbon (SPE<img>C) and single-wall carbon-nanotube (SPE-SWCNT) working electrodes. BPS was detected over a wide linear range from 1 to 400 μM. The detection limits were 0.73 μM and 0.87 μM for the SPE-C and SPE-SWCNT electrodes, respectively. Good repeatability was observed for both sensors when using one electrode 16 times, which demonstrates its potential for real-time environmental monitoring. Additionally, traditional chromatographic methods, high-performance liquid chromatography with a diode-array detector (HPLC-DAD), and liquid chromatography-mass spectrometry triple quadrupole (LCMS), were incorporated to enhance analytical capabilities. HPLC-DAD achieved a detection limit of 3 nM after solid-phase extraction preconcentration, while LCMS triple quadrupole demonstrated a detection limit of 10 pM without preconcentration. Electrochemical screen-printed electrodes can be employed for on-site analysis and health-risk assessments in everyday settings, such as shops. However, for detecting very low concentrations where time is not a constraint, LCMS quadrupole remains the preferred technique.</p></div>","PeriodicalId":424,"journal":{"name":"Sensing and Bio-Sensing Research","volume":null,"pages":null},"PeriodicalIF":5.4000,"publicationDate":"2024-06-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://www.sciencedirect.com/science/article/pii/S2214180424000448/pdfft?md5=c7001980a531ec3eaca9b0d45860c0cd&pid=1-s2.0-S2214180424000448-main.pdf","citationCount":"0","resultStr":"{\"title\":\"Rapid and reliable electrochemical detection of bisphenol S in thermal paper\",\"authors\":\"Jelena Vujančević , Neža Sodnik , Anja Korent , Špela Črešnovar , Polonca Trebše , Mojca Bavcon Kralj , Mitja Martelanc , Zoran Samardžija , Kristina Žagar Soderžnik\",\"doi\":\"10.1016/j.sbsr.2024.100662\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<div><p>Bisphenol S (BPS) is a common, persistent, and mobile chemical found in everyday products such as thermal paper. BPS can easily enter the body by migrating from the paper to the fingers, disrupting the endocrine system by mimicking the oestrogen hormone, thus negatively influencing human health. Assessing BPS levels in daily life is of great importance. This study introduces a rapid and reliable approach for detecting BPS in thermal paper and tap water by developing an electrochemical analytical method. This method allows for in-situ, real-time measurements. We present a simple, low-cost electrochemical sensor for detecting BPS using screen-printed electrodes based on carbon (SPE<img>C) and single-wall carbon-nanotube (SPE-SWCNT) working electrodes. BPS was detected over a wide linear range from 1 to 400 μM. The detection limits were 0.73 μM and 0.87 μM for the SPE-C and SPE-SWCNT electrodes, respectively. Good repeatability was observed for both sensors when using one electrode 16 times, which demonstrates its potential for real-time environmental monitoring. Additionally, traditional chromatographic methods, high-performance liquid chromatography with a diode-array detector (HPLC-DAD), and liquid chromatography-mass spectrometry triple quadrupole (LCMS), were incorporated to enhance analytical capabilities. HPLC-DAD achieved a detection limit of 3 nM after solid-phase extraction preconcentration, while LCMS triple quadrupole demonstrated a detection limit of 10 pM without preconcentration. Electrochemical screen-printed electrodes can be employed for on-site analysis and health-risk assessments in everyday settings, such as shops. However, for detecting very low concentrations where time is not a constraint, LCMS quadrupole remains the preferred technique.</p></div>\",\"PeriodicalId\":424,\"journal\":{\"name\":\"Sensing and Bio-Sensing Research\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":5.4000,\"publicationDate\":\"2024-06-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"https://www.sciencedirect.com/science/article/pii/S2214180424000448/pdfft?md5=c7001980a531ec3eaca9b0d45860c0cd&pid=1-s2.0-S2214180424000448-main.pdf\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Sensing and Bio-Sensing Research\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://www.sciencedirect.com/science/article/pii/S2214180424000448\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q1\",\"JCRName\":\"CHEMISTRY, ANALYTICAL\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Sensing and Bio-Sensing Research","FirstCategoryId":"1085","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S2214180424000448","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"CHEMISTRY, ANALYTICAL","Score":null,"Total":0}
Rapid and reliable electrochemical detection of bisphenol S in thermal paper
Bisphenol S (BPS) is a common, persistent, and mobile chemical found in everyday products such as thermal paper. BPS can easily enter the body by migrating from the paper to the fingers, disrupting the endocrine system by mimicking the oestrogen hormone, thus negatively influencing human health. Assessing BPS levels in daily life is of great importance. This study introduces a rapid and reliable approach for detecting BPS in thermal paper and tap water by developing an electrochemical analytical method. This method allows for in-situ, real-time measurements. We present a simple, low-cost electrochemical sensor for detecting BPS using screen-printed electrodes based on carbon (SPEC) and single-wall carbon-nanotube (SPE-SWCNT) working electrodes. BPS was detected over a wide linear range from 1 to 400 μM. The detection limits were 0.73 μM and 0.87 μM for the SPE-C and SPE-SWCNT electrodes, respectively. Good repeatability was observed for both sensors when using one electrode 16 times, which demonstrates its potential for real-time environmental monitoring. Additionally, traditional chromatographic methods, high-performance liquid chromatography with a diode-array detector (HPLC-DAD), and liquid chromatography-mass spectrometry triple quadrupole (LCMS), were incorporated to enhance analytical capabilities. HPLC-DAD achieved a detection limit of 3 nM after solid-phase extraction preconcentration, while LCMS triple quadrupole demonstrated a detection limit of 10 pM without preconcentration. Electrochemical screen-printed electrodes can be employed for on-site analysis and health-risk assessments in everyday settings, such as shops. However, for detecting very low concentrations where time is not a constraint, LCMS quadrupole remains the preferred technique.
期刊介绍:
Sensing and Bio-Sensing Research is an open access journal dedicated to the research, design, development, and application of bio-sensing and sensing technologies. The editors will accept research papers, reviews, field trials, and validation studies that are of significant relevance. These submissions should describe new concepts, enhance understanding of the field, or offer insights into the practical application, manufacturing, and commercialization of bio-sensing and sensing technologies.
The journal covers a wide range of topics, including sensing principles and mechanisms, new materials development for transducers and recognition components, fabrication technology, and various types of sensors such as optical, electrochemical, mass-sensitive, gas, biosensors, and more. It also includes environmental, process control, and biomedical applications, signal processing, chemometrics, optoelectronic, mechanical, thermal, and magnetic sensors, as well as interface electronics. Additionally, it covers sensor systems and applications, µTAS (Micro Total Analysis Systems), development of solid-state devices for transducing physical signals, and analytical devices incorporating biological materials.