Leonardo Delgadillo Buenrostro , Louis Gosselin , Pierre Blanchet
{"title":"墙体连接处空气流动的湿热反应:两种数值方法与实验之间的比较","authors":"Leonardo Delgadillo Buenrostro , Louis Gosselin , Pierre Blanchet","doi":"10.1016/j.ijthermalsci.2024.109169","DOIUrl":null,"url":null,"abstract":"<div><p>Airflow in wall-to-wall junctions is known to have a major hygrothermal impact on building performance. However, current and validated modeling options to simulate such phenomena are limited. This paper develops and compares two numerical models to study the heat and moisture transfer due to air infiltrations through a prefabricated wall-to-wall junction. The first model explicitly accounts for the airflow with a pipe flow approach. The second model is a modification to a typical approach to simulate ventilated cavities in building envelope simulation tools and mimics the effect of the airflow through source terms. Both approaches were introduced in a heat and moisture transfer 2D finite element model. Additionally, laboratory measurements were conducted in a climatic chamber to validate the simulation results. Six scenarios were tested experimentally under steady-state conditions. These datasets were used to calibrate different parameters of the models, such as material properties, the junction air gap thickness, and the magnitude of the heat and moisture source terms. Both sets of numerical results provided reasonable agreement with the measurements. The first approach outputs more accurate temperature and relative humidity values than the second one. However, considering uncertainties, no method predicted a perfect fit with the relative humidity profiles. Close to the junction, the first method estimates better the relative humidity than the second one. This work provides guidelines to better model and account for wall junctions in building envelope simulators.</p></div>","PeriodicalId":341,"journal":{"name":"International Journal of Thermal Sciences","volume":null,"pages":null},"PeriodicalIF":4.9000,"publicationDate":"2024-05-28","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://www.sciencedirect.com/science/article/pii/S1290072924002916/pdfft?md5=11badd3fb2951df6b054ce9bae4fab7b&pid=1-s2.0-S1290072924002916-main.pdf","citationCount":"0","resultStr":"{\"title\":\"Hygrothermal response to air movements in wall junctions: Comparison between two numerical approaches and experiments\",\"authors\":\"Leonardo Delgadillo Buenrostro , Louis Gosselin , Pierre Blanchet\",\"doi\":\"10.1016/j.ijthermalsci.2024.109169\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<div><p>Airflow in wall-to-wall junctions is known to have a major hygrothermal impact on building performance. However, current and validated modeling options to simulate such phenomena are limited. This paper develops and compares two numerical models to study the heat and moisture transfer due to air infiltrations through a prefabricated wall-to-wall junction. The first model explicitly accounts for the airflow with a pipe flow approach. The second model is a modification to a typical approach to simulate ventilated cavities in building envelope simulation tools and mimics the effect of the airflow through source terms. Both approaches were introduced in a heat and moisture transfer 2D finite element model. Additionally, laboratory measurements were conducted in a climatic chamber to validate the simulation results. Six scenarios were tested experimentally under steady-state conditions. These datasets were used to calibrate different parameters of the models, such as material properties, the junction air gap thickness, and the magnitude of the heat and moisture source terms. Both sets of numerical results provided reasonable agreement with the measurements. The first approach outputs more accurate temperature and relative humidity values than the second one. However, considering uncertainties, no method predicted a perfect fit with the relative humidity profiles. Close to the junction, the first method estimates better the relative humidity than the second one. This work provides guidelines to better model and account for wall junctions in building envelope simulators.</p></div>\",\"PeriodicalId\":341,\"journal\":{\"name\":\"International Journal of Thermal Sciences\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":4.9000,\"publicationDate\":\"2024-05-28\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"https://www.sciencedirect.com/science/article/pii/S1290072924002916/pdfft?md5=11badd3fb2951df6b054ce9bae4fab7b&pid=1-s2.0-S1290072924002916-main.pdf\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"International Journal of Thermal Sciences\",\"FirstCategoryId\":\"5\",\"ListUrlMain\":\"https://www.sciencedirect.com/science/article/pii/S1290072924002916\",\"RegionNum\":2,\"RegionCategory\":\"工程技术\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q1\",\"JCRName\":\"ENGINEERING, MECHANICAL\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"International Journal of Thermal Sciences","FirstCategoryId":"5","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S1290072924002916","RegionNum":2,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"ENGINEERING, MECHANICAL","Score":null,"Total":0}
Hygrothermal response to air movements in wall junctions: Comparison between two numerical approaches and experiments
Airflow in wall-to-wall junctions is known to have a major hygrothermal impact on building performance. However, current and validated modeling options to simulate such phenomena are limited. This paper develops and compares two numerical models to study the heat and moisture transfer due to air infiltrations through a prefabricated wall-to-wall junction. The first model explicitly accounts for the airflow with a pipe flow approach. The second model is a modification to a typical approach to simulate ventilated cavities in building envelope simulation tools and mimics the effect of the airflow through source terms. Both approaches were introduced in a heat and moisture transfer 2D finite element model. Additionally, laboratory measurements were conducted in a climatic chamber to validate the simulation results. Six scenarios were tested experimentally under steady-state conditions. These datasets were used to calibrate different parameters of the models, such as material properties, the junction air gap thickness, and the magnitude of the heat and moisture source terms. Both sets of numerical results provided reasonable agreement with the measurements. The first approach outputs more accurate temperature and relative humidity values than the second one. However, considering uncertainties, no method predicted a perfect fit with the relative humidity profiles. Close to the junction, the first method estimates better the relative humidity than the second one. This work provides guidelines to better model and account for wall junctions in building envelope simulators.
期刊介绍:
The International Journal of Thermal Sciences is a journal devoted to the publication of fundamental studies on the physics of transfer processes in general, with an emphasis on thermal aspects and also applied research on various processes, energy systems and the environment. Articles are published in English and French, and are subject to peer review.
The fundamental subjects considered within the scope of the journal are:
* Heat and relevant mass transfer at all scales (nano, micro and macro) and in all types of material (heterogeneous, composites, biological,...) and fluid flow
* Forced, natural or mixed convection in reactive or non-reactive media
* Single or multi–phase fluid flow with or without phase change
* Near–and far–field radiative heat transfer
* Combined modes of heat transfer in complex systems (for example, plasmas, biological, geological,...)
* Multiscale modelling
The applied research topics include:
* Heat exchangers, heat pipes, cooling processes
* Transport phenomena taking place in industrial processes (chemical, food and agricultural, metallurgical, space and aeronautical, automobile industries)
* Nano–and micro–technology for energy, space, biosystems and devices
* Heat transport analysis in advanced systems
* Impact of energy–related processes on environment, and emerging energy systems
The study of thermophysical properties of materials and fluids, thermal measurement techniques, inverse methods, and the developments of experimental methods are within the scope of the International Journal of Thermal Sciences which also covers the modelling, and numerical methods applied to thermal transfer.