Furnace MILD combustion versus its open counterpart in hot coflow

The open jet flame in hot co-flow (JHC) has been frequently utilized for fundamental investigations of Moderate or Intense Low-oxygen Dilution (MILD) combustion due to its controllable conditions and relatively easy measurement capabilities. However, practical MILD combustion must take place within a combustor that is enclosed. Therefore, it is necessary to examine the similarity and disparity of combustion characteristics between two flame configurations. This issue is addressed currently. Specifically, we investigate the flow mixing, ignition, and combustion, as well as emission characteristics of non-premixed and premixed JHC and cylindrical furnace (FUR) flames at various values of the environmental temperature (T_e) and central jet Reynolds number (Re). For the open non-premixed flames, we employ both previous single-tube JHC (SJHC) combustor and presently modified JHC (MJHC) one that uses the same nozzle configuration as the FUR burner. It is revealed that significant differences occur in flow, combustion and emission characteristics between the SJHC and FUR cases. On the other hand, both non-premixed and premixed MJHC configurations exhibit high similarity to the corresponding FUR cases in terms of upstream flow mixing and combustion features. Moreover, different CO and NO_x emissions result from open JHC and close furnace flames due to different post-combustion configuration and residence time. Accordingly, future experiments on non-premixed MJHC and premixed JHC flames are highly recommended for better understanding practical MILD combustion.