Jing Li, Lili Gao, Yue Chen, Xinyi Meng, Xuelian Li, Kai Qi and Jiandong Zhang
{"title":"尿素和氟化铵二氮与铜和铁双金属共掺杂碳毡作为阴极用于诺氟沙星的电-芬顿降解:1O2主导的氧化途径","authors":"Jing Li, Lili Gao, Yue Chen, Xinyi Meng, Xuelian Li, Kai Qi and Jiandong Zhang","doi":"10.1039/D4EW00210E","DOIUrl":null,"url":null,"abstract":"<p >Carbon materials co-doped with both metals and non-metallic heteroatoms have become an important research focus as catalysts for heterogeneous electro-Fenton technology and the removal of refractory organics. However, there is still a lack of in-depth studies on the doping of carbon with multiple nitrogen sources and their possible synergistic mechanism. In this study, two types of nitrogens (urea and ammonium fluoride) and Cu&Fe bimetal co-doped carbon felt electrodes (C–CuFe/N) were designed to explore the effect of co-doping on carbon. C–CuFe/N exhibited a high degradation efficiency towards norfloxacin (97.2%), low ion leaching and high cycling stability (90.3% after ten cycles), better than those shown by C–CuFe, C–CuFe/UN and C–CuFe/FN prepared with none or a single nitrogen dopant. Various characterizations indicated that C–CuFe/N has the largest specific surface area, highest content of Fe(<small>II</small>), most surface oxygen and active sites, and importantly, stable M–N<small><sub><em>x</em></sub></small> bond, indicating that UN and FN exhibited an excellent synergistic effect. According to the quenching experiments, the dominant reactive oxygen species for C–CuFe, C–CuFe/UN and C–CuFe/FN were radical species (·OH and O<small><sub>2</sub></small>˙<small><sup>−</sup></small>), while they changed to non-radical species (<small><sup>1</sup></small>O<small><sub>2</sub></small>) for C–CuFe/N under acidic condition. Alternatively, C–CuFe/N showed a good catalytic performance (97.2–92.3%) over a wide initial pH range (1.2–11.3), but during the degradation process, all the pH values changed toward neutral, and the oxidation pathway varied from <small><sup>1</sup></small>O<small><sub>2</sub></small>-dominated under acidic condition to radical-dominated under neutral or alkaline condition. Generally, a good synergistic effect was found to exist between the dual nitrogens, which promoted the catalytic activity as well as stability of the catalyst, thus providing a good strategy to design catalysts.</p>","PeriodicalId":3,"journal":{"name":"ACS Applied Electronic Materials","volume":null,"pages":null},"PeriodicalIF":4.3000,"publicationDate":"2024-05-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Urea and ammonium fluoride di-nitrogen and Cu & Fe bi-metal co-doped carbon felt as cathode for electro-Fenton degradation of norfloxacin: 1O2-dominated oxidation pathway†\",\"authors\":\"Jing Li, Lili Gao, Yue Chen, Xinyi Meng, Xuelian Li, Kai Qi and Jiandong Zhang\",\"doi\":\"10.1039/D4EW00210E\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<p >Carbon materials co-doped with both metals and non-metallic heteroatoms have become an important research focus as catalysts for heterogeneous electro-Fenton technology and the removal of refractory organics. However, there is still a lack of in-depth studies on the doping of carbon with multiple nitrogen sources and their possible synergistic mechanism. In this study, two types of nitrogens (urea and ammonium fluoride) and Cu&Fe bimetal co-doped carbon felt electrodes (C–CuFe/N) were designed to explore the effect of co-doping on carbon. C–CuFe/N exhibited a high degradation efficiency towards norfloxacin (97.2%), low ion leaching and high cycling stability (90.3% after ten cycles), better than those shown by C–CuFe, C–CuFe/UN and C–CuFe/FN prepared with none or a single nitrogen dopant. Various characterizations indicated that C–CuFe/N has the largest specific surface area, highest content of Fe(<small>II</small>), most surface oxygen and active sites, and importantly, stable M–N<small><sub><em>x</em></sub></small> bond, indicating that UN and FN exhibited an excellent synergistic effect. According to the quenching experiments, the dominant reactive oxygen species for C–CuFe, C–CuFe/UN and C–CuFe/FN were radical species (·OH and O<small><sub>2</sub></small>˙<small><sup>−</sup></small>), while they changed to non-radical species (<small><sup>1</sup></small>O<small><sub>2</sub></small>) for C–CuFe/N under acidic condition. Alternatively, C–CuFe/N showed a good catalytic performance (97.2–92.3%) over a wide initial pH range (1.2–11.3), but during the degradation process, all the pH values changed toward neutral, and the oxidation pathway varied from <small><sup>1</sup></small>O<small><sub>2</sub></small>-dominated under acidic condition to radical-dominated under neutral or alkaline condition. Generally, a good synergistic effect was found to exist between the dual nitrogens, which promoted the catalytic activity as well as stability of the catalyst, thus providing a good strategy to design catalysts.</p>\",\"PeriodicalId\":3,\"journal\":{\"name\":\"ACS Applied Electronic Materials\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":4.3000,\"publicationDate\":\"2024-05-20\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"ACS Applied Electronic Materials\",\"FirstCategoryId\":\"93\",\"ListUrlMain\":\"https://pubs.rsc.org/en/content/articlelanding/2024/ew/d4ew00210e\",\"RegionNum\":3,\"RegionCategory\":\"材料科学\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q1\",\"JCRName\":\"ENGINEERING, ELECTRICAL & ELECTRONIC\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"ACS Applied Electronic Materials","FirstCategoryId":"93","ListUrlMain":"https://pubs.rsc.org/en/content/articlelanding/2024/ew/d4ew00210e","RegionNum":3,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"ENGINEERING, ELECTRICAL & ELECTRONIC","Score":null,"Total":0}
Urea and ammonium fluoride di-nitrogen and Cu & Fe bi-metal co-doped carbon felt as cathode for electro-Fenton degradation of norfloxacin: 1O2-dominated oxidation pathway†
Carbon materials co-doped with both metals and non-metallic heteroatoms have become an important research focus as catalysts for heterogeneous electro-Fenton technology and the removal of refractory organics. However, there is still a lack of in-depth studies on the doping of carbon with multiple nitrogen sources and their possible synergistic mechanism. In this study, two types of nitrogens (urea and ammonium fluoride) and Cu&Fe bimetal co-doped carbon felt electrodes (C–CuFe/N) were designed to explore the effect of co-doping on carbon. C–CuFe/N exhibited a high degradation efficiency towards norfloxacin (97.2%), low ion leaching and high cycling stability (90.3% after ten cycles), better than those shown by C–CuFe, C–CuFe/UN and C–CuFe/FN prepared with none or a single nitrogen dopant. Various characterizations indicated that C–CuFe/N has the largest specific surface area, highest content of Fe(II), most surface oxygen and active sites, and importantly, stable M–Nx bond, indicating that UN and FN exhibited an excellent synergistic effect. According to the quenching experiments, the dominant reactive oxygen species for C–CuFe, C–CuFe/UN and C–CuFe/FN were radical species (·OH and O2˙−), while they changed to non-radical species (1O2) for C–CuFe/N under acidic condition. Alternatively, C–CuFe/N showed a good catalytic performance (97.2–92.3%) over a wide initial pH range (1.2–11.3), but during the degradation process, all the pH values changed toward neutral, and the oxidation pathway varied from 1O2-dominated under acidic condition to radical-dominated under neutral or alkaline condition. Generally, a good synergistic effect was found to exist between the dual nitrogens, which promoted the catalytic activity as well as stability of the catalyst, thus providing a good strategy to design catalysts.