Yuxiao Xue , Deqing Zhu , Jian Pan , Gen Li , Xuewei Lv
{"title":"有效利用镍铬轴承复合材料负担制备高铬镍铁","authors":"Yuxiao Xue , Deqing Zhu , Jian Pan , Gen Li , Xuewei Lv","doi":"10.1016/j.powtec.2024.119915","DOIUrl":null,"url":null,"abstract":"<div><p>In this paper, two types of Ni-Cr bearing composite burdens including SP1 (79% Ni-bearing sinter and 21% Cr-bearing oxide pellets) and SP2 (84% Ni-bearing sinter and 16% Cr-bearing pre-reduced pellets) were used for the more efficient preparation of high-Cr ferronickel. Based on the metallurgical performance characterization, thermodynamic analysis and smelting parameters optimization, the qualified high-Cr ferronickel were prepared by the utilization of the Ni-Cr bearing composite burdens. The recovery rates of iron, chromium and nickel exceed 95%, 90% and 98% whereas their grades are 85.56–85.88%, 7.82–8.02% and 1.59–1.62%, respectively. Compared with SP1, SP2 possesses lower smelting duration, which indicates the appropriate proportioning of Cr-bearing pre-reduced pellets is beneficial for the smelting process. The obtained high-Cr ferronickel consisting of (Fe, Cr)<sub>3</sub>C and (Fe, Cr)<sub>7</sub>C<sub>3</sub> can be used as a low-cost substitute for the conventional raw materials of 200 or 300 series of stainless steel.</p></div>","PeriodicalId":407,"journal":{"name":"Powder Technology","volume":null,"pages":null},"PeriodicalIF":4.5000,"publicationDate":"2024-05-23","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Effective utilization of Ni-Cr bearing composite burdens for high-Cr ferronickel preparation\",\"authors\":\"Yuxiao Xue , Deqing Zhu , Jian Pan , Gen Li , Xuewei Lv\",\"doi\":\"10.1016/j.powtec.2024.119915\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<div><p>In this paper, two types of Ni-Cr bearing composite burdens including SP1 (79% Ni-bearing sinter and 21% Cr-bearing oxide pellets) and SP2 (84% Ni-bearing sinter and 16% Cr-bearing pre-reduced pellets) were used for the more efficient preparation of high-Cr ferronickel. Based on the metallurgical performance characterization, thermodynamic analysis and smelting parameters optimization, the qualified high-Cr ferronickel were prepared by the utilization of the Ni-Cr bearing composite burdens. The recovery rates of iron, chromium and nickel exceed 95%, 90% and 98% whereas their grades are 85.56–85.88%, 7.82–8.02% and 1.59–1.62%, respectively. Compared with SP1, SP2 possesses lower smelting duration, which indicates the appropriate proportioning of Cr-bearing pre-reduced pellets is beneficial for the smelting process. The obtained high-Cr ferronickel consisting of (Fe, Cr)<sub>3</sub>C and (Fe, Cr)<sub>7</sub>C<sub>3</sub> can be used as a low-cost substitute for the conventional raw materials of 200 or 300 series of stainless steel.</p></div>\",\"PeriodicalId\":407,\"journal\":{\"name\":\"Powder Technology\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":4.5000,\"publicationDate\":\"2024-05-23\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Powder Technology\",\"FirstCategoryId\":\"5\",\"ListUrlMain\":\"https://www.sciencedirect.com/science/article/pii/S0032591024005588\",\"RegionNum\":2,\"RegionCategory\":\"工程技术\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q2\",\"JCRName\":\"ENGINEERING, CHEMICAL\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Powder Technology","FirstCategoryId":"5","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S0032591024005588","RegionNum":2,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"ENGINEERING, CHEMICAL","Score":null,"Total":0}
Effective utilization of Ni-Cr bearing composite burdens for high-Cr ferronickel preparation
In this paper, two types of Ni-Cr bearing composite burdens including SP1 (79% Ni-bearing sinter and 21% Cr-bearing oxide pellets) and SP2 (84% Ni-bearing sinter and 16% Cr-bearing pre-reduced pellets) were used for the more efficient preparation of high-Cr ferronickel. Based on the metallurgical performance characterization, thermodynamic analysis and smelting parameters optimization, the qualified high-Cr ferronickel were prepared by the utilization of the Ni-Cr bearing composite burdens. The recovery rates of iron, chromium and nickel exceed 95%, 90% and 98% whereas their grades are 85.56–85.88%, 7.82–8.02% and 1.59–1.62%, respectively. Compared with SP1, SP2 possesses lower smelting duration, which indicates the appropriate proportioning of Cr-bearing pre-reduced pellets is beneficial for the smelting process. The obtained high-Cr ferronickel consisting of (Fe, Cr)3C and (Fe, Cr)7C3 can be used as a low-cost substitute for the conventional raw materials of 200 or 300 series of stainless steel.
期刊介绍:
Powder Technology is an International Journal on the Science and Technology of Wet and Dry Particulate Systems. Powder Technology publishes papers on all aspects of the formation of particles and their characterisation and on the study of systems containing particulate solids. No limitation is imposed on the size of the particles, which may range from nanometre scale, as in pigments or aerosols, to that of mined or quarried materials. The following list of topics is not intended to be comprehensive, but rather to indicate typical subjects which fall within the scope of the journal's interests:
Formation and synthesis of particles by precipitation and other methods.
Modification of particles by agglomeration, coating, comminution and attrition.
Characterisation of the size, shape, surface area, pore structure and strength of particles and agglomerates (including the origins and effects of inter particle forces).
Packing, failure, flow and permeability of assemblies of particles.
Particle-particle interactions and suspension rheology.
Handling and processing operations such as slurry flow, fluidization, pneumatic conveying.
Interactions between particles and their environment, including delivery of particulate products to the body.
Applications of particle technology in production of pharmaceuticals, chemicals, foods, pigments, structural, and functional materials and in environmental and energy related matters.
For materials-oriented contributions we are looking for articles revealing the effect of particle/powder characteristics (size, morphology and composition, in that order) on material performance or functionality and, ideally, comparison to any industrial standard.