通过添加增塑剂在聚乳酸/聚对苯二甲酸乙二醇酯(50/50)共混物中独家形成立体复合物晶体

IF 2.3 4区 化学 Q3 POLYMER SCIENCE
Neimatallah Hosni Mohammed Mahmoud, Hideaki Takagi, Nobutaka Shimizu, Noriyuki Igarashi, Shinichi Sakurai
{"title":"通过添加增塑剂在聚乳酸/聚对苯二甲酸乙二醇酯(50/50)共混物中独家形成立体复合物晶体","authors":"Neimatallah Hosni Mohammed Mahmoud, Hideaki Takagi, Nobutaka Shimizu, Noriyuki Igarashi, Shinichi Sakurai","doi":"10.1038/s41428-024-00919-4","DOIUrl":null,"url":null,"abstract":"This study examined the effects of loading amounts of a biobased plasticizer, namely, organic acid monoglyceride (OMG), on the formation of homocrystals (HCs) and stereocomplex crystals (SCs) in PLLA/PDLA (50/50) blends by means of differential scanning calorimetry (DSC), wide-angle X-ray diffraction (WAXD) and polarized optical microscopy (POM) observations. OMG at different concentrations was added to the PLLA/PDLA (50/50) blend from 0.5 to 5% in 0.5% increments. The addition of OMG was found to enhance SC formation while suppressing HC formation in both nonisothermal and isothermal experiments. The total suppression of HC formation and exclusive SC formation was achieved in the specimens with OMG contents higher than 3% after isothermal crystallization at 170 °C for 5 h. This result was confirmed by WAXD measurements of the specimens with 4 and 5% OMG, where only SC diffraction peaks were observed. In addition, the degree of crystallinity was found to be the same for the specimens with 0 and 5% OMG crystallized at 170 °C for 5 h. These findings imply that not only did the SC form exclusively but also that the presence of OMG actively accelerated its crystallization. The effects of an organic monoglyceride (OMG) plasticizer on the crystallization of the PLLA/PDLA (50/50) blend were investigated by examining the isothermal crystallization of the blend with different contents of OMG (1–5 wt%) using POM, DSC, and time-resolved WAXD. It was found that the increase of the OMG content promoted the exclusive formation of stereocomplex crystallites and enhanced its crystallinity while suppressing the formation of homocrystals.","PeriodicalId":20302,"journal":{"name":"Polymer Journal","volume":"56 9","pages":"819-831"},"PeriodicalIF":2.3000,"publicationDate":"2024-05-24","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Exclusive formation of stereocomplex crystallites in PLLA/PDLA (50/50) blends by the addition of a plasticizer\",\"authors\":\"Neimatallah Hosni Mohammed Mahmoud, Hideaki Takagi, Nobutaka Shimizu, Noriyuki Igarashi, Shinichi Sakurai\",\"doi\":\"10.1038/s41428-024-00919-4\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"This study examined the effects of loading amounts of a biobased plasticizer, namely, organic acid monoglyceride (OMG), on the formation of homocrystals (HCs) and stereocomplex crystals (SCs) in PLLA/PDLA (50/50) blends by means of differential scanning calorimetry (DSC), wide-angle X-ray diffraction (WAXD) and polarized optical microscopy (POM) observations. OMG at different concentrations was added to the PLLA/PDLA (50/50) blend from 0.5 to 5% in 0.5% increments. The addition of OMG was found to enhance SC formation while suppressing HC formation in both nonisothermal and isothermal experiments. The total suppression of HC formation and exclusive SC formation was achieved in the specimens with OMG contents higher than 3% after isothermal crystallization at 170 °C for 5 h. This result was confirmed by WAXD measurements of the specimens with 4 and 5% OMG, where only SC diffraction peaks were observed. In addition, the degree of crystallinity was found to be the same for the specimens with 0 and 5% OMG crystallized at 170 °C for 5 h. These findings imply that not only did the SC form exclusively but also that the presence of OMG actively accelerated its crystallization. The effects of an organic monoglyceride (OMG) plasticizer on the crystallization of the PLLA/PDLA (50/50) blend were investigated by examining the isothermal crystallization of the blend with different contents of OMG (1–5 wt%) using POM, DSC, and time-resolved WAXD. It was found that the increase of the OMG content promoted the exclusive formation of stereocomplex crystallites and enhanced its crystallinity while suppressing the formation of homocrystals.\",\"PeriodicalId\":20302,\"journal\":{\"name\":\"Polymer Journal\",\"volume\":\"56 9\",\"pages\":\"819-831\"},\"PeriodicalIF\":2.3000,\"publicationDate\":\"2024-05-24\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Polymer Journal\",\"FirstCategoryId\":\"92\",\"ListUrlMain\":\"https://www.nature.com/articles/s41428-024-00919-4\",\"RegionNum\":4,\"RegionCategory\":\"化学\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q3\",\"JCRName\":\"POLYMER SCIENCE\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Polymer Journal","FirstCategoryId":"92","ListUrlMain":"https://www.nature.com/articles/s41428-024-00919-4","RegionNum":4,"RegionCategory":"化学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"POLYMER SCIENCE","Score":null,"Total":0}
引用次数: 0

摘要

本研究通过差示扫描量热法(DSC)、广角 X 射线衍射法(WAXD)和偏光光学显微镜(POM)观察,研究了生物基增塑剂(即有机酸单甘酯(OMG))的添加量对 PLLA/PDLA (50/50) 共混物中同晶(HCs)和立体复晶(SCs)形成的影响。在 PLLA/PDLA (50/50) 混合物中添加了不同浓度的 OMG,添加量从 0.5%到 5%不等,增量为 0.5%。在非等温和等温实验中发现,添加 OMG 可增强 SC 的形成,同时抑制 HC 的形成。在 170 °C 等温结晶 5 小时后,OMG 含量高于 3% 的试样完全抑制了 HC 的形成,只形成了 SC。此外,在 170 °C 下结晶 5 小时后,发现含有 0% 和 5% OMG 的试样的结晶度相同。这些发现意味着 SC 不仅是完全形成的,而且 OMG 的存在还积极地加速了其结晶。通过使用 POM、DSC 和时间分辨 WAXD 检测不同 OMG 含量(1-5 wt%)的混合物的等温结晶,研究了有机单甘酯(OMG)增塑剂对 PLLA/PDLA (50/50) 混合物结晶的影响。结果发现,OMG 含量的增加促进了立体复合物晶体的形成,提高了其结晶度,同时抑制了同晶的形成。
本文章由计算机程序翻译,如有差异,请以英文原文为准。

Exclusive formation of stereocomplex crystallites in PLLA/PDLA (50/50) blends by the addition of a plasticizer

Exclusive formation of stereocomplex crystallites in PLLA/PDLA (50/50) blends by the addition of a plasticizer

Exclusive formation of stereocomplex crystallites in PLLA/PDLA (50/50) blends by the addition of a plasticizer
This study examined the effects of loading amounts of a biobased plasticizer, namely, organic acid monoglyceride (OMG), on the formation of homocrystals (HCs) and stereocomplex crystals (SCs) in PLLA/PDLA (50/50) blends by means of differential scanning calorimetry (DSC), wide-angle X-ray diffraction (WAXD) and polarized optical microscopy (POM) observations. OMG at different concentrations was added to the PLLA/PDLA (50/50) blend from 0.5 to 5% in 0.5% increments. The addition of OMG was found to enhance SC formation while suppressing HC formation in both nonisothermal and isothermal experiments. The total suppression of HC formation and exclusive SC formation was achieved in the specimens with OMG contents higher than 3% after isothermal crystallization at 170 °C for 5 h. This result was confirmed by WAXD measurements of the specimens with 4 and 5% OMG, where only SC diffraction peaks were observed. In addition, the degree of crystallinity was found to be the same for the specimens with 0 and 5% OMG crystallized at 170 °C for 5 h. These findings imply that not only did the SC form exclusively but also that the presence of OMG actively accelerated its crystallization. The effects of an organic monoglyceride (OMG) plasticizer on the crystallization of the PLLA/PDLA (50/50) blend were investigated by examining the isothermal crystallization of the blend with different contents of OMG (1–5 wt%) using POM, DSC, and time-resolved WAXD. It was found that the increase of the OMG content promoted the exclusive formation of stereocomplex crystallites and enhanced its crystallinity while suppressing the formation of homocrystals.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
Polymer Journal
Polymer Journal 化学-高分子科学
CiteScore
5.60
自引率
7.10%
发文量
131
审稿时长
2.5 months
期刊介绍: Polymer Journal promotes research from all aspects of polymer science from anywhere in the world and aims to provide an integrated platform for scientific communication that assists the advancement of polymer science and related fields. The journal publishes Original Articles, Notes, Short Communications and Reviews. Subject areas and topics of particular interest within the journal''s scope include, but are not limited to, those listed below: Polymer synthesis and reactions Polymer structures Physical properties of polymers Polymer surface and interfaces Functional polymers Supramolecular polymers Self-assembled materials Biopolymers and bio-related polymer materials Polymer engineering.
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信