Faster Evaluation of Dimensional Machine Performance in Additive Manufacturing by Using COMPAQT Parts

Knowing the tolerance interval capabilities (TICs) of a manufacturing process is of prime interest, especially if specifications link the manufacturer to a customer. These TICs can be determined using the machine performance concept of ISO 22514. However, few works have applied this to Additive Manufacturing printers, while testing most of the printing area as recommended takes a very long time (nearly 1 month is common). This paper, by proposing a novel part design called COMPAQT (Component for Machine Performances Assessment in Quick Time), aims at giving the same level of printing area coverage, while keeping the manufacturing time below 24 h. The method was successfully tested on a material extrusion printer. It allowed the determination of potential and real machine tolerance interval capabilities. Independently of the feature size, those aligned with the X axis achieved lower TICs than those aligned with the Y axis, while the Z axis exhibited the best performance. The measurements specific to one part exhibited a systematic error centered around 0 mm ± 0.050 mm, while those involving two parts reached up to 0.314 mm of deviation. COMPAQT can be used in two applications: evaluating printer tolerance interval capabilities and tracking its long-term performance by incorporating it into batches of other parts.