Dark pottery from the early Iron Age in southern Veneto, Italy: The provenance issue under the adoption of specific technological procedures

One of the earliest known settlements of Pre-Roman Padua, Veneto Region (north-eastern Italy) was located in the very centre of the present-day city. The archaeological excavations revealed structures related to craft activities (metallurgical and pottery workshops) and residential areas datable from the late 9th to the 1st century BCE. A large pyrotechnic structure formed by an earthen block densely filled and covered by broken ceramic vessels was found, bringing to light the earliest foundry of the Pre-Roman Padua known to date. Many potsherds found in the site correspond to a regional ceramic class that included coarse and fine wares mainly composed of very dark ceramic bodies. A multi-analytical study based on macroscopic and petrographic descriptions as well as mineralogical, geochemical and microstructural analyses, was carried out in order to state the technological choices adopted for producing these dark vessels and the provenance of the raw materials. A poorly manufacturing was adopted to produce the common pottery, resulting coarse wares uneven textured, while the fine wares were produced by adopting the purification of the base clays and/or the tempering of the clay pastes. Common geo-resources were used, consisting in illitic-chloritic clays rich in quartz and feldspars, the firing regime conditions covered a range of maximum temperatures (normally under 850 °C) and the temper was constituted by silicate (chiefly quartzite, rhyolite and trachyte rock fragments) and/or carbonate (calcite and/or dolomite) inclusions, that were added after having been grounded and/or sieved. The specific mineral and lithic markers of provenance identified in the sherds confirmed the correspondence of this pottery with a local production. However, the specific technological choices that were carried out must be taking into consideration, since the purification removed the larger grains originally present in the base clays and the tempering influenced the chemical composition of the sherds. The different degree of purification of the base clays and the differential tempering procedures that were accomplished point out the adoption of very specific recipes to produce the fine wares, suggesting the correspondence of this local ceramic class with diverse sub-productions and the high level of specialization achieved by the potters in southern Veneto during the Early Iron Age.