Comparison of iterative reconstruction implementations for multislice helical CT.

The most mature image reconstruction algorithms in multislice helical computed tomography are based on analytical and iterative methods. Over the past decades, several methods have been developed for iterative reconstructions that improve image quality by reducing noise and artifacts. In the regularization step of iterative reconstruction, noise can be significantly reduced, thereby making low-dose CT. The quality of the reconstructed image can be further improved by using model-based reconstructions. In these reconstructions, the main focus is on modeling the data acquisition process, including the behavior of the photon beams, the geometry of the system, etc. In this article, we propose two model-based reconstruction algorithms using a virtual detector for multislice helical CT. The aim of this study is to compare the effect of using a virtual detector on image quality for the two proposed algorithms with a model-based iterative reconstruction using the original detector model. Since the algorithms are implemented using multiple GPUs, the merging of separately reconstructed volumes can significantly affect image quality. This issue is often referred to as the "long object" problem, for which we also present a solution that plays an important role in the proposed reconstruction processes. The algorithms were evaluated using mathematical and physical phantoms, as well as patient cases. The SSIM, MS-SSIM and L₁ metrics were utilized to evaluate the image quality of the mathematical phantom case. To demonstrate the effectiveness of the algorithms, we used the CatPhan 600 phantom. Additionally, anonymized patient scans were used to showcase the improvements in image quality on real scan data.