Integration of optimal power flow with combined heat and power dispatch of renewable wind energy based power system using chaotic driving training based optimization

Combined heat and power economic dispatch (CHPED) based optimal power flow (OPF) problem has been studied in this article using a new, practical approach based on chaotic driving training optimization (DTBO) (CDTBO). In the proposed technique (CDTBO), the chaotic based learning is integrated with DTBO to overcome the local optimal problem and inferior convergence speed of the existing algorithms. OPF is an important concern to retain the power system running effectively. In order to meet the demand for reasonably priced power generation with optimal power flow in transmission lines, the authors combined CHPED and OPF. Since fuel is changing daily in the current environment, using renewable energy sources to generate electricity economically is crucial. The renewable energy source like wind energy is integrated with thermal units for economic power generation with reducing the thermal fuel consumption of CHPED-based OPF system. The proposed technique implemented on CHPED based IEEE-30 bus system for renewable and without renewable energy sources with considering different cases. The suggested problem considering with valve point loading of thermal units, transmission losses and uncertainties of wind speed to address the non-linearity of the renewable-based CHPED-OPF system. Cost minimization, voltage deviation control, transmission losses minimization and stability index are the single objectives of the prospective system. Furthermore tested on multi-objective functions for simultaneously minimization of cost with emission and simultaneously minimization of active power loss with voltage profile. It is observed that the proposed CDTBO technique helps to reduce the cost by 2% and 12.8% for renewable based system as compared to non-renewable system for multi-objective function. The robustness of the proposed solution has been verified by implementing the statistical analysis on two systems with least variation of mean and optimal values of cost with the tolerance of less than 0.0035%. A comparison has been made with recent well known optimization techniques to address the superiority of the suggested CDTBO algorithm.