{"title":"利用多分散方法和气泡坍塌模型对气泡凝结进行建模和模拟","authors":"T. Herry , B. Raverdy , S. Mimouni , S. Vincent","doi":"10.1016/j.ijmultiphaseflow.2024.104846","DOIUrl":null,"url":null,"abstract":"<div><p>An accurate modeling of the bubble condensation phenomena in sub-cooled water is developed in this work, using a two-fluid model with one disperse phase and one Interfacial Area Transport Equation (IATE). For this, the aspects of some models are investigated, such as the choice of population balance models, Nusselt closure model and bubble collapse model in IATE. The standard method of moments is formulated using two different bubble size distribution functions among all, namely Dirac and quadratic laws. Therefore, different models for mass and energy interfacial transfers, interfacial forces and source terms of the IATE are developed using both functions. While limited differences are noticeable for the mass and energy transfers obtained by both functions, the results are largely improved using quadratic function for the drag force term and for the IATE source terms. Moreover, the simulations results show that the widely used Ranz-Marshall correlation clearly underestimates the condensation rate. However, this work shows that Chen–Mayinger correlation is relevant to simulate this type of flow, regardless the distribution function. Afterwards, a model is introduced to take into account the effect of bubble collapse by condensation in the IATE. The numerical results obtained using the quadratic function, the collapse model in the IATE and the Chen–Mayinger correlation are comparable to those obtained by the inhomogeneous MUltiple Size Group (iMUSIG) approach, while being less time-consuming.</p></div>","PeriodicalId":339,"journal":{"name":"International Journal of Multiphase Flow","volume":null,"pages":null},"PeriodicalIF":3.6000,"publicationDate":"2024-04-26","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Modeling and simulation of bubble condensation using polydisperse approach with bubble collapse model\",\"authors\":\"T. Herry , B. Raverdy , S. Mimouni , S. Vincent\",\"doi\":\"10.1016/j.ijmultiphaseflow.2024.104846\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<div><p>An accurate modeling of the bubble condensation phenomena in sub-cooled water is developed in this work, using a two-fluid model with one disperse phase and one Interfacial Area Transport Equation (IATE). For this, the aspects of some models are investigated, such as the choice of population balance models, Nusselt closure model and bubble collapse model in IATE. The standard method of moments is formulated using two different bubble size distribution functions among all, namely Dirac and quadratic laws. Therefore, different models for mass and energy interfacial transfers, interfacial forces and source terms of the IATE are developed using both functions. While limited differences are noticeable for the mass and energy transfers obtained by both functions, the results are largely improved using quadratic function for the drag force term and for the IATE source terms. Moreover, the simulations results show that the widely used Ranz-Marshall correlation clearly underestimates the condensation rate. However, this work shows that Chen–Mayinger correlation is relevant to simulate this type of flow, regardless the distribution function. Afterwards, a model is introduced to take into account the effect of bubble collapse by condensation in the IATE. The numerical results obtained using the quadratic function, the collapse model in the IATE and the Chen–Mayinger correlation are comparable to those obtained by the inhomogeneous MUltiple Size Group (iMUSIG) approach, while being less time-consuming.</p></div>\",\"PeriodicalId\":339,\"journal\":{\"name\":\"International Journal of Multiphase Flow\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":3.6000,\"publicationDate\":\"2024-04-26\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"International Journal of Multiphase Flow\",\"FirstCategoryId\":\"5\",\"ListUrlMain\":\"https://www.sciencedirect.com/science/article/pii/S0301932224001241\",\"RegionNum\":2,\"RegionCategory\":\"工程技术\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q1\",\"JCRName\":\"MECHANICS\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"International Journal of Multiphase Flow","FirstCategoryId":"5","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S0301932224001241","RegionNum":2,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"MECHANICS","Score":null,"Total":0}
Modeling and simulation of bubble condensation using polydisperse approach with bubble collapse model
An accurate modeling of the bubble condensation phenomena in sub-cooled water is developed in this work, using a two-fluid model with one disperse phase and one Interfacial Area Transport Equation (IATE). For this, the aspects of some models are investigated, such as the choice of population balance models, Nusselt closure model and bubble collapse model in IATE. The standard method of moments is formulated using two different bubble size distribution functions among all, namely Dirac and quadratic laws. Therefore, different models for mass and energy interfacial transfers, interfacial forces and source terms of the IATE are developed using both functions. While limited differences are noticeable for the mass and energy transfers obtained by both functions, the results are largely improved using quadratic function for the drag force term and for the IATE source terms. Moreover, the simulations results show that the widely used Ranz-Marshall correlation clearly underestimates the condensation rate. However, this work shows that Chen–Mayinger correlation is relevant to simulate this type of flow, regardless the distribution function. Afterwards, a model is introduced to take into account the effect of bubble collapse by condensation in the IATE. The numerical results obtained using the quadratic function, the collapse model in the IATE and the Chen–Mayinger correlation are comparable to those obtained by the inhomogeneous MUltiple Size Group (iMUSIG) approach, while being less time-consuming.
期刊介绍:
The International Journal of Multiphase Flow publishes analytical, numerical and experimental articles of lasting interest. The scope of the journal includes all aspects of mass, momentum and energy exchange phenomena among different phases such as occur in disperse flows, gas–liquid and liquid–liquid flows, flows in porous media, boiling, granular flows and others.
The journal publishes full papers, brief communications and conference announcements.