超临界二氧化碳辅助缩水甘油聚硅氧烷改性芳纶纤维对芳纶纤维增强丁苯橡胶复合材料性能的影响

IF 2.9 4区 化学 Q2 POLYMER SCIENCE
Yang Li, Caiwen Shi, Xiaoli Pan, Le Yang, Chun Zhang
{"title":"超临界二氧化碳辅助缩水甘油聚硅氧烷改性芳纶纤维对芳纶纤维增强丁苯橡胶复合材料性能的影响","authors":"Yang Li,&nbsp;Caiwen Shi,&nbsp;Xiaoli Pan,&nbsp;Le Yang,&nbsp;Chun Zhang","doi":"10.1002/pi.6613","DOIUrl":null,"url":null,"abstract":"<p>The weak interfacial adhesion of aramid fibers (AFs) in rubber composites can be improved by modifying their surface structure. Herein, modified AFs with a high grafting rate were prepared by modification using glycidyl polyhedral silsesquioxane (POSS) assisted with supercritical carbon dioxide (scCO<sub>2</sub>). X-ray photoelectron spectroscopy confirmed the chemical bonding between AFs and glycidyl POSS. Thermogravimetric analysis and scanning electron microscopy images showed that POSS was grafted uniformly and the surface roughness enhanced obviously. After grafting the rubber with 5 wt% glycidyl POSS assisted with scCO<sub>2</sub>, the surface grafting rate reached 12.26% and surface crystal spacing increased. The grafted layer on the modified AF surface was uniform, and the tensile strength of the modified fiber increased by 7.98%. Short AF-reinforced carbon black/styrene butadiene rubber (AF/CB/SBR = 2/50/100 phr) composites were prepared to investigate the adhesion strength between modified AFs and SBR. The reduction in tan <i>δ</i> of the composites confirmed the improvement in the interfacial adhesion strength. The tensile strength and modulus at 100% elongation of the composites increased by 15.13% and 25.77%, respectively, and the relative interface slip increased by 23.26%. Moreover, the cutting resistance of the composites showed a dramatic improvement, particularly for grafting with 5% glycidyl POSS assisted with scCO<sub>2</sub>. © 2024 Society of Industrial Chemistry.</p>","PeriodicalId":20404,"journal":{"name":"Polymer International","volume":"73 6","pages":"454-463"},"PeriodicalIF":2.9000,"publicationDate":"2024-01-29","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Influence of aramid fibers modified by glycidyl polyhedral silsesquioxane assisted with supercritical carbon dioxide on the properties of aramid fiber-reinforced styrene butadiene rubber composites\",\"authors\":\"Yang Li,&nbsp;Caiwen Shi,&nbsp;Xiaoli Pan,&nbsp;Le Yang,&nbsp;Chun Zhang\",\"doi\":\"10.1002/pi.6613\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<p>The weak interfacial adhesion of aramid fibers (AFs) in rubber composites can be improved by modifying their surface structure. Herein, modified AFs with a high grafting rate were prepared by modification using glycidyl polyhedral silsesquioxane (POSS) assisted with supercritical carbon dioxide (scCO<sub>2</sub>). X-ray photoelectron spectroscopy confirmed the chemical bonding between AFs and glycidyl POSS. Thermogravimetric analysis and scanning electron microscopy images showed that POSS was grafted uniformly and the surface roughness enhanced obviously. After grafting the rubber with 5 wt% glycidyl POSS assisted with scCO<sub>2</sub>, the surface grafting rate reached 12.26% and surface crystal spacing increased. The grafted layer on the modified AF surface was uniform, and the tensile strength of the modified fiber increased by 7.98%. Short AF-reinforced carbon black/styrene butadiene rubber (AF/CB/SBR = 2/50/100 phr) composites were prepared to investigate the adhesion strength between modified AFs and SBR. The reduction in tan <i>δ</i> of the composites confirmed the improvement in the interfacial adhesion strength. The tensile strength and modulus at 100% elongation of the composites increased by 15.13% and 25.77%, respectively, and the relative interface slip increased by 23.26%. Moreover, the cutting resistance of the composites showed a dramatic improvement, particularly for grafting with 5% glycidyl POSS assisted with scCO<sub>2</sub>. © 2024 Society of Industrial Chemistry.</p>\",\"PeriodicalId\":20404,\"journal\":{\"name\":\"Polymer International\",\"volume\":\"73 6\",\"pages\":\"454-463\"},\"PeriodicalIF\":2.9000,\"publicationDate\":\"2024-01-29\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Polymer International\",\"FirstCategoryId\":\"92\",\"ListUrlMain\":\"https://onlinelibrary.wiley.com/doi/10.1002/pi.6613\",\"RegionNum\":4,\"RegionCategory\":\"化学\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q2\",\"JCRName\":\"POLYMER SCIENCE\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Polymer International","FirstCategoryId":"92","ListUrlMain":"https://onlinelibrary.wiley.com/doi/10.1002/pi.6613","RegionNum":4,"RegionCategory":"化学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"POLYMER SCIENCE","Score":null,"Total":0}
引用次数: 0

摘要

芳纶纤维(AFs)在橡胶复合材料中的界面粘附性较弱,可通过改性其表面结构来改善这一问题。本文通过使用缩水甘油基多面体硅倍半氧烷(POSS)在超临界二氧化碳(scCO2)辅助下进行改性,制备了具有高接枝率的改性芳纶纤维。X 射线光电子能谱证实了 AFs 与缩水甘油 POSS 之间的化学键。热重分析和扫描电子显微镜图像显示,POSS 接枝均匀,表面粗糙度明显提高。在 scCO2 的辅助下接枝 5 wt% 缩水甘油基 POSS 后,橡胶表面接枝率达到 12.26%,表面晶体间距增大。改性 AF 表面接枝层均匀,改性纤维的拉伸强度提高了 7.98%。制备了短 AF 增强炭黑/丁苯橡胶(AF/CB/SBR = 2/50/100 phr)复合材料,以研究改性 AF 与丁苯橡胶之间的粘附强度。复合材料 tan δ 的降低证实了界面粘附强度的提高。复合材料的拉伸强度和 100%伸长时的模量分别提高了 15.13% 和 25.77%,相对界面滑移提高了 23.26%。此外,复合材料的耐切割性也有显著提高,尤其是在使用 scCO2 辅助 5%缩水甘油 POSS 接枝时。© 2024 工业化学学会。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
Influence of aramid fibers modified by glycidyl polyhedral silsesquioxane assisted with supercritical carbon dioxide on the properties of aramid fiber-reinforced styrene butadiene rubber composites

The weak interfacial adhesion of aramid fibers (AFs) in rubber composites can be improved by modifying their surface structure. Herein, modified AFs with a high grafting rate were prepared by modification using glycidyl polyhedral silsesquioxane (POSS) assisted with supercritical carbon dioxide (scCO2). X-ray photoelectron spectroscopy confirmed the chemical bonding between AFs and glycidyl POSS. Thermogravimetric analysis and scanning electron microscopy images showed that POSS was grafted uniformly and the surface roughness enhanced obviously. After grafting the rubber with 5 wt% glycidyl POSS assisted with scCO2, the surface grafting rate reached 12.26% and surface crystal spacing increased. The grafted layer on the modified AF surface was uniform, and the tensile strength of the modified fiber increased by 7.98%. Short AF-reinforced carbon black/styrene butadiene rubber (AF/CB/SBR = 2/50/100 phr) composites were prepared to investigate the adhesion strength between modified AFs and SBR. The reduction in tan δ of the composites confirmed the improvement in the interfacial adhesion strength. The tensile strength and modulus at 100% elongation of the composites increased by 15.13% and 25.77%, respectively, and the relative interface slip increased by 23.26%. Moreover, the cutting resistance of the composites showed a dramatic improvement, particularly for grafting with 5% glycidyl POSS assisted with scCO2. © 2024 Society of Industrial Chemistry.

求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
Polymer International
Polymer International 化学-高分子科学
CiteScore
7.10
自引率
3.10%
发文量
135
审稿时长
4.3 months
期刊介绍: Polymer International (PI) publishes the most significant advances in macromolecular science and technology. PI especially welcomes research papers that address applications that fall within the broad headings Energy and Electronics, Biomedical Studies, and Water, Environment and Sustainability. The Journal’s editors have identified these as the major challenges facing polymer scientists worldwide. The Journal also publishes invited Review, Mini-review and Perspective papers that address these challenges and others that may be of growing or future relevance to polymer scientists and engineers.
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信