数据驱动的全州范围内信号灯重定时项目走廊优先排序

IF 4.3 Q2 TRANSPORTATION
Nemanja Dobrota , Burak Cesme , Charlie Fisher , Patrick Mead , Milad Tahmasebi , Akhilesh Shastri
{"title":"数据驱动的全州范围内信号灯重定时项目走廊优先排序","authors":"Nemanja Dobrota ,&nbsp;Burak Cesme ,&nbsp;Charlie Fisher ,&nbsp;Patrick Mead ,&nbsp;Milad Tahmasebi ,&nbsp;Akhilesh Shastri","doi":"10.1016/j.ijtst.2024.02.005","DOIUrl":null,"url":null,"abstract":"<div><div>While emerging technologies has substantially improved the way traffic signals operated, most agencies still rely on the traditional approach of retiming, which is typically initiated by “trigger” events (e.g., signal retiming occurs due to citizen calls, a major change in land use or roadway geometry, sustained oversaturation, and safety concerns). The approach of using triggers can work effectively for small agencies, however, such an approach may not be sustainable for agencies that operate a high number of corridors. Additionally, agencies are often limited in terms of their budget to retime signals. Therefore, strategic selection of corridors is important to effectively utilize existing resources. Recently data-driven methods for prioritization of corridors for retiming were proposed. However, these methods either rely on datasets that are not widely available or only account for corridor performance (e.g., speed) without considering other relevant factors that can be important during prioritization. Further, most prior attempts estimated corridor performance based on the simple average performance of individual intersections. Such an approach may distort the results for corridors with largely dispersed intersection performance. To overcome these challenges, this study proposes a novel ranking approach based on data that is available to most agencies and incorporates normalized corridor delay, corridor travel time reliability, annual average daily traffic, and time since the last retiming. The proposed method was applied to 120 corridors (consisting of 756 signals) across the State of Ohio in the US. It was found that ranking results are highly aligned with agency representatives’ expectations, as most of the highly ranked corridors have already been identified by agency representatives for future retiming projects. Moreover, the before-and-after analysis from recent retiming studies on highly ranked corridors revealed substantial benefits, confirming the effectiveness of the proposed ranking method. The proposed ranking and prioritization method discussed in this paper could be beneficial for agencies with a large number of corridors and limited budget and resources so that they can effectively prioritize their corridors for future signal retiming projects.</div></div>","PeriodicalId":52282,"journal":{"name":"International Journal of Transportation Science and Technology","volume":"16 ","pages":"Pages 260-275"},"PeriodicalIF":4.3000,"publicationDate":"2024-12-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Data-driven statewide prioritization of corridors for signal retiming projects\",\"authors\":\"Nemanja Dobrota ,&nbsp;Burak Cesme ,&nbsp;Charlie Fisher ,&nbsp;Patrick Mead ,&nbsp;Milad Tahmasebi ,&nbsp;Akhilesh Shastri\",\"doi\":\"10.1016/j.ijtst.2024.02.005\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<div><div>While emerging technologies has substantially improved the way traffic signals operated, most agencies still rely on the traditional approach of retiming, which is typically initiated by “trigger” events (e.g., signal retiming occurs due to citizen calls, a major change in land use or roadway geometry, sustained oversaturation, and safety concerns). The approach of using triggers can work effectively for small agencies, however, such an approach may not be sustainable for agencies that operate a high number of corridors. Additionally, agencies are often limited in terms of their budget to retime signals. Therefore, strategic selection of corridors is important to effectively utilize existing resources. Recently data-driven methods for prioritization of corridors for retiming were proposed. However, these methods either rely on datasets that are not widely available or only account for corridor performance (e.g., speed) without considering other relevant factors that can be important during prioritization. Further, most prior attempts estimated corridor performance based on the simple average performance of individual intersections. Such an approach may distort the results for corridors with largely dispersed intersection performance. To overcome these challenges, this study proposes a novel ranking approach based on data that is available to most agencies and incorporates normalized corridor delay, corridor travel time reliability, annual average daily traffic, and time since the last retiming. The proposed method was applied to 120 corridors (consisting of 756 signals) across the State of Ohio in the US. It was found that ranking results are highly aligned with agency representatives’ expectations, as most of the highly ranked corridors have already been identified by agency representatives for future retiming projects. Moreover, the before-and-after analysis from recent retiming studies on highly ranked corridors revealed substantial benefits, confirming the effectiveness of the proposed ranking method. The proposed ranking and prioritization method discussed in this paper could be beneficial for agencies with a large number of corridors and limited budget and resources so that they can effectively prioritize their corridors for future signal retiming projects.</div></div>\",\"PeriodicalId\":52282,\"journal\":{\"name\":\"International Journal of Transportation Science and Technology\",\"volume\":\"16 \",\"pages\":\"Pages 260-275\"},\"PeriodicalIF\":4.3000,\"publicationDate\":\"2024-12-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"International Journal of Transportation Science and Technology\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://www.sciencedirect.com/science/article/pii/S2046043024000157\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q2\",\"JCRName\":\"TRANSPORTATION\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"International Journal of Transportation Science and Technology","FirstCategoryId":"1085","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S2046043024000157","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"TRANSPORTATION","Score":null,"Total":0}
引用次数: 0

摘要

本文章由计算机程序翻译,如有差异,请以英文原文为准。
Data-driven statewide prioritization of corridors for signal retiming projects
While emerging technologies has substantially improved the way traffic signals operated, most agencies still rely on the traditional approach of retiming, which is typically initiated by “trigger” events (e.g., signal retiming occurs due to citizen calls, a major change in land use or roadway geometry, sustained oversaturation, and safety concerns). The approach of using triggers can work effectively for small agencies, however, such an approach may not be sustainable for agencies that operate a high number of corridors. Additionally, agencies are often limited in terms of their budget to retime signals. Therefore, strategic selection of corridors is important to effectively utilize existing resources. Recently data-driven methods for prioritization of corridors for retiming were proposed. However, these methods either rely on datasets that are not widely available or only account for corridor performance (e.g., speed) without considering other relevant factors that can be important during prioritization. Further, most prior attempts estimated corridor performance based on the simple average performance of individual intersections. Such an approach may distort the results for corridors with largely dispersed intersection performance. To overcome these challenges, this study proposes a novel ranking approach based on data that is available to most agencies and incorporates normalized corridor delay, corridor travel time reliability, annual average daily traffic, and time since the last retiming. The proposed method was applied to 120 corridors (consisting of 756 signals) across the State of Ohio in the US. It was found that ranking results are highly aligned with agency representatives’ expectations, as most of the highly ranked corridors have already been identified by agency representatives for future retiming projects. Moreover, the before-and-after analysis from recent retiming studies on highly ranked corridors revealed substantial benefits, confirming the effectiveness of the proposed ranking method. The proposed ranking and prioritization method discussed in this paper could be beneficial for agencies with a large number of corridors and limited budget and resources so that they can effectively prioritize their corridors for future signal retiming projects.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
International Journal of Transportation Science and Technology
International Journal of Transportation Science and Technology Engineering-Civil and Structural Engineering
CiteScore
7.20
自引率
0.00%
发文量
105
审稿时长
88 days
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信