{"title":"利用玻璃纤维的再利用来改善污水修复管道的耐化学性,从而实现可持续的解决方案","authors":"Devanand Chelot, Shivnarain Ravichandran, Priyank Upadhyaya","doi":"10.3390/recycling9020028","DOIUrl":null,"url":null,"abstract":"This paper introduces a sustainable sewage rehabilitation solution, utilizing repurposed glass fibers for enhanced chemical resilience and environmental conservation. The approach involves dividing a unitary pipe into segments, assembled during commissioning, aiming to reduce installation and transportation costs, particularly in less accessible areas. Each pipe segment comprises a multi-layered glass fiber composite sandwich, joined by an adhesive reinforced with recycled glass fibers. The glass fiber-reinforced plastic (GFRP) pipe features a core of blended sand impregnated with resin, an outer layer for impact resistance, and an inner layer to prevent corrosion. Chemical resilience is assessed through a 10,000 h strain corrosion study exposing both unitary and two-piece circular GFRP pipes to sulfuric acid in a deflected condition. An apparent hoop tensile test evaluates mechanical integrity before and after exposure. The experimental results reveal that the two-piece pipe with a tongue and groove joint (TGJ) with recycled glass fiber adhesive exhibits superior long-term bending stress and failure strain % compared to unitary pipes. This enhancement is attributed to the TGJ’s improved load-bearing capability and chemical resistance. The failure strain % of the two-piece pipe (1.697%) is higher compared to the unitary pipe (1.2613%). The long-term bending stress of the two-piece pipe obtained is 119.94 MPa whereas the unitary pipe reaches 93.48 MPa at the 50-year mark. The cost analysis supports the adoption of the two-piece pipe over unitary pipes due to a 40% reduction in carbon emissions and transportation cost. The novelty lies in the utilization of multi-piece pipes with enhanced chemical resilience, achieved through the incorporation of milled fiberglass reinforcements in the TGJ. Strain corrosion tests take a long time to perform; hence, an accelerated test is needed to improve the current recommended testing standard.","PeriodicalId":36729,"journal":{"name":"Recycling","volume":null,"pages":null},"PeriodicalIF":4.6000,"publicationDate":"2024-03-31","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"A Sustainable Solution with Improved Chemical Resilience Using Repurposed Glass Fibers for Sewage Rehabilitation Pipes\",\"authors\":\"Devanand Chelot, Shivnarain Ravichandran, Priyank Upadhyaya\",\"doi\":\"10.3390/recycling9020028\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"This paper introduces a sustainable sewage rehabilitation solution, utilizing repurposed glass fibers for enhanced chemical resilience and environmental conservation. The approach involves dividing a unitary pipe into segments, assembled during commissioning, aiming to reduce installation and transportation costs, particularly in less accessible areas. Each pipe segment comprises a multi-layered glass fiber composite sandwich, joined by an adhesive reinforced with recycled glass fibers. The glass fiber-reinforced plastic (GFRP) pipe features a core of blended sand impregnated with resin, an outer layer for impact resistance, and an inner layer to prevent corrosion. Chemical resilience is assessed through a 10,000 h strain corrosion study exposing both unitary and two-piece circular GFRP pipes to sulfuric acid in a deflected condition. An apparent hoop tensile test evaluates mechanical integrity before and after exposure. The experimental results reveal that the two-piece pipe with a tongue and groove joint (TGJ) with recycled glass fiber adhesive exhibits superior long-term bending stress and failure strain % compared to unitary pipes. This enhancement is attributed to the TGJ’s improved load-bearing capability and chemical resistance. The failure strain % of the two-piece pipe (1.697%) is higher compared to the unitary pipe (1.2613%). The long-term bending stress of the two-piece pipe obtained is 119.94 MPa whereas the unitary pipe reaches 93.48 MPa at the 50-year mark. The cost analysis supports the adoption of the two-piece pipe over unitary pipes due to a 40% reduction in carbon emissions and transportation cost. The novelty lies in the utilization of multi-piece pipes with enhanced chemical resilience, achieved through the incorporation of milled fiberglass reinforcements in the TGJ. Strain corrosion tests take a long time to perform; hence, an accelerated test is needed to improve the current recommended testing standard.\",\"PeriodicalId\":36729,\"journal\":{\"name\":\"Recycling\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":4.6000,\"publicationDate\":\"2024-03-31\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Recycling\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.3390/recycling9020028\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q2\",\"JCRName\":\"GREEN & SUSTAINABLE SCIENCE & TECHNOLOGY\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Recycling","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.3390/recycling9020028","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"GREEN & SUSTAINABLE SCIENCE & TECHNOLOGY","Score":null,"Total":0}
A Sustainable Solution with Improved Chemical Resilience Using Repurposed Glass Fibers for Sewage Rehabilitation Pipes
This paper introduces a sustainable sewage rehabilitation solution, utilizing repurposed glass fibers for enhanced chemical resilience and environmental conservation. The approach involves dividing a unitary pipe into segments, assembled during commissioning, aiming to reduce installation and transportation costs, particularly in less accessible areas. Each pipe segment comprises a multi-layered glass fiber composite sandwich, joined by an adhesive reinforced with recycled glass fibers. The glass fiber-reinforced plastic (GFRP) pipe features a core of blended sand impregnated with resin, an outer layer for impact resistance, and an inner layer to prevent corrosion. Chemical resilience is assessed through a 10,000 h strain corrosion study exposing both unitary and two-piece circular GFRP pipes to sulfuric acid in a deflected condition. An apparent hoop tensile test evaluates mechanical integrity before and after exposure. The experimental results reveal that the two-piece pipe with a tongue and groove joint (TGJ) with recycled glass fiber adhesive exhibits superior long-term bending stress and failure strain % compared to unitary pipes. This enhancement is attributed to the TGJ’s improved load-bearing capability and chemical resistance. The failure strain % of the two-piece pipe (1.697%) is higher compared to the unitary pipe (1.2613%). The long-term bending stress of the two-piece pipe obtained is 119.94 MPa whereas the unitary pipe reaches 93.48 MPa at the 50-year mark. The cost analysis supports the adoption of the two-piece pipe over unitary pipes due to a 40% reduction in carbon emissions and transportation cost. The novelty lies in the utilization of multi-piece pipes with enhanced chemical resilience, achieved through the incorporation of milled fiberglass reinforcements in the TGJ. Strain corrosion tests take a long time to perform; hence, an accelerated test is needed to improve the current recommended testing standard.