A technique for estimation of cyclic stress-strain curves using an optical strain measurement and its application to additively manufactured AlSi10Mg

The article describes a new accelerated technique for estimation of cyclic stress-strain curves of cyclically stable materials based on a full-field measurement of strain during low-cycle testing on a large amplitude of loading. Any optical method suitable for capturing the strain contours on the curved part of the specimen during cyclic loading is applicable in the approach developed. In this study, the digital image correlation method is used to measure the deformation on the curved part of the specimen. The technique is presented on chosen results of low-cycle fatigue tests performed on AlSi10Mg printed with selective laser melting technology. Proportional loading cases were performed in tension-compression and pure torsion. The case of non-proportional loading was realized in the form of 90 degree out-of-phase tests. The stress-strain behavior is evaluated using a standard procedure and an accelerated technique with a good correlation for the three loading cases.