Preliminary establishment and validation of the inversion method for growth and remodeling parameters of patient-specific abdominal aortic aneurysm

Traditional medical imaging and biomechanical studies have challenges in analyzing the long-term evolution process of abdominal aortic aneurysm (AAA). The homogenized constrained mixture theory (HCMT) allows for quantitative analysis of the changes in the multidimensional morphology and composition of AAA. However, the accuracy of HCMT still requires further clinical verification. This study aims to establish a patient-specific AAA growth model based on HCMT, simulate the long-term growth and remodeling (G&R) process of AAA, and validate the feasibility and accuracy of the method using two additional AAA cases with five follow-up datasets. The media and adventitia layers of AAA were modeled as mixtures composed of elastin, collagen fibers, and smooth muscle cells (SMCs). The strain energy function was used to describe the continuous deposition and degradation effect of the mixture during the AAA evolution. Multiple sets of growth parameters were applied to finite element simulations, and the simulation results were compared with the follow-up data for gradually selecting the optimal growth parameters. Two additional AAA patients with different growth rates were used for validating this method, the optimal growth parameters were obtained using the first two follow-up imaging data, and the growth model was applied to simulate the subsequent four time points. The differences between the simulated diameters and the follow-up diameters of AAA were compared to validate the accuracy of the mechanistic model. The growth parameters, especially the stress-mediated substance deposition gain factor, are highly related to the AAA G&R process. When setting the optimal growth parameters to simulate AAA growth, the proportion of simulation results within the distance of less than 0.5 mm from the baseline models is above 80%. For the validating cases, the mean difference rates between the simulated diameter and the real-world diameter are within 2.5%, which basically meets the clinical demand for quantitatively predicting the AAA growth in maximum diameters. This study simulated the growth process of AAA, and validated the accuracy of this mechanistic model. This method was proved to be used to predict the G&R process of AAA caused by dynamic changes in the mixtures of the AAA vessel wall during long-term, assisting accurately and quantitatively predicting the multidimensional morphological development and mixtures evolution process of AAA in the clinic.