The technology of polychrome glazed ceramics in Ifriqiya: new data from the site of Chimtou

Ifriqiya (roughly Tunisia and eastern Algeria) is believed to have played a significant role in the diffusion of ceramic glazed technologies into other regions of the Western Mediterranean. However, due to limited analysis on North African glazed ceramics, its role in technology transfer remains poorly understood. This paper uses SEM–EDS and petrographic analyses to understand the technology employed in the production of Tunisian ceramics through the study of 30 polychrome glazed ceramics from a medieval settlement at the site of Chimtou (ancient Simitthus), Tunisia, dated to the late ninth-twelfth century. The results show that these are lead-rich glazes with varying contents of alkalis, coloured with copper, iron and manganese oxide and applied over a calcareous body. Opaque glazes were obtained using cassiterite crystals as opacifier or by adding crushed quartz. The use of lead stannate as a colourant and opacifier in one light yellow glaze raises questions about the mechanisms of introduction of tin opacification technology in North Africa. Scrap metal seems to have been used as a source of lead for the glazes; while iron slag was probably used as a source of iron to colour the glaze in one sample, pointing to a cross-craft interaction between glazemaking and metallurgy.