泡沫橡胶在密封应用中的使用

IF 2.9 3区 工程技术 Q2 ENGINEERING, CHEMICAL
T. Alexopoulos, E. N. Gazis, S. Maltezos, G. Koutelieris, B. N. J. Persson
{"title":"泡沫橡胶在密封应用中的使用","authors":"T. Alexopoulos,&nbsp;E. N. Gazis,&nbsp;S. Maltezos,&nbsp;G. Koutelieris,&nbsp;B. N. J. Persson","doi":"10.1007/s11249-024-01845-5","DOIUrl":null,"url":null,"abstract":"<div><p>O-rings made from foam rubber are often used in sealing applications. Foam rubber have low (macroscopic) elastic modulus <span>\\(E_0\\)</span> resulting in a low nominal contact pressure when squeezed against a countersurface. In most cases the foam rubber is covered by a thin surface film with the effective elastic modulus <span>\\(E_1 &gt; E_0\\)</span>. We show that the nominal contact pressure may not be high enough for the contact area to percolate and the O-ring seal will leak. For the leakage calculations we use the Persson multiscale contact mechanics theory, and the (modified) Bruggeman effective medium theory for the fluid flow conductivity. The experimental input for the theory are surface roughness power spectrum, which was obtained from stylus topography measurements, and the elastic properties (<span>\\(E_0\\)</span> and <span>\\(E_1\\)</span>) of the rubber O-ring. As an application of this calculation method, we have used the preliminary as well as the final results of the laboratory gas tightness tests of the 136 New Small Wheel Micromegas Quadruplets performed at CERN, from February 2019 to May 2021, in the framework of the ATLAS Experiment upgrade. In the integration quality control, a novel method for gas tightness measurement, that we have called “Flow Rate Loss”, has been used as a baseline method.</p><h3>Graphical Abstract</h3><div><figure><div><div><picture><source><img></source></picture></div></div></figure></div></div>","PeriodicalId":806,"journal":{"name":"Tribology Letters","volume":null,"pages":null},"PeriodicalIF":2.9000,"publicationDate":"2024-03-11","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://link.springer.com/content/pdf/10.1007/s11249-024-01845-5.pdf","citationCount":"0","resultStr":"{\"title\":\"On the Use of Foam Rubber for Sealing Applications\",\"authors\":\"T. Alexopoulos,&nbsp;E. N. Gazis,&nbsp;S. Maltezos,&nbsp;G. Koutelieris,&nbsp;B. N. J. Persson\",\"doi\":\"10.1007/s11249-024-01845-5\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<div><p>O-rings made from foam rubber are often used in sealing applications. Foam rubber have low (macroscopic) elastic modulus <span>\\\\(E_0\\\\)</span> resulting in a low nominal contact pressure when squeezed against a countersurface. In most cases the foam rubber is covered by a thin surface film with the effective elastic modulus <span>\\\\(E_1 &gt; E_0\\\\)</span>. We show that the nominal contact pressure may not be high enough for the contact area to percolate and the O-ring seal will leak. For the leakage calculations we use the Persson multiscale contact mechanics theory, and the (modified) Bruggeman effective medium theory for the fluid flow conductivity. The experimental input for the theory are surface roughness power spectrum, which was obtained from stylus topography measurements, and the elastic properties (<span>\\\\(E_0\\\\)</span> and <span>\\\\(E_1\\\\)</span>) of the rubber O-ring. As an application of this calculation method, we have used the preliminary as well as the final results of the laboratory gas tightness tests of the 136 New Small Wheel Micromegas Quadruplets performed at CERN, from February 2019 to May 2021, in the framework of the ATLAS Experiment upgrade. In the integration quality control, a novel method for gas tightness measurement, that we have called “Flow Rate Loss”, has been used as a baseline method.</p><h3>Graphical Abstract</h3><div><figure><div><div><picture><source><img></source></picture></div></div></figure></div></div>\",\"PeriodicalId\":806,\"journal\":{\"name\":\"Tribology Letters\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":2.9000,\"publicationDate\":\"2024-03-11\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"https://link.springer.com/content/pdf/10.1007/s11249-024-01845-5.pdf\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Tribology Letters\",\"FirstCategoryId\":\"5\",\"ListUrlMain\":\"https://link.springer.com/article/10.1007/s11249-024-01845-5\",\"RegionNum\":3,\"RegionCategory\":\"工程技术\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q2\",\"JCRName\":\"ENGINEERING, CHEMICAL\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Tribology Letters","FirstCategoryId":"5","ListUrlMain":"https://link.springer.com/article/10.1007/s11249-024-01845-5","RegionNum":3,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"ENGINEERING, CHEMICAL","Score":null,"Total":0}
引用次数: 0

摘要

摘要 发泡橡胶制成的 O 形圈通常用于密封应用。泡沫橡胶具有较低的(宏观)弹性模量(E_0\),因此在挤压反面时标称接触压力较低。在大多数情况下,泡沫橡胶表面覆盖着一层薄膜,其有效弹性模量为(E_1 > E_0\)。我们的研究表明,额定接触压力可能不足以使接触面积渗透,O 型密封圈会发生泄漏。在泄漏计算中,我们使用了佩尔松多尺度接触力学理论,以及流体流动传导性的(修正)布鲁格曼有效介质理论。理论的实验输入是通过测针形貌测量获得的表面粗糙度功率谱,以及橡胶 O 形圈的弹性特性(\(E_0\) 和\(E_1\) )。作为该计算方法的应用,我们使用了2019年2月至2021年5月在欧洲核子研究中心(CERN)进行的136个 "新小轮微型气体四胞胎"(New Small Wheel Micromegas Quadruplets)实验室气密性测试的初步和最终结果,该测试是在ATLAS实验升级的框架内进行的。在集成质量控制中,我们使用了一种名为 "流速损失 "的新型气密性测量方法作为基线方法。 图表摘要
本文章由计算机程序翻译,如有差异,请以英文原文为准。
On the Use of Foam Rubber for Sealing Applications

O-rings made from foam rubber are often used in sealing applications. Foam rubber have low (macroscopic) elastic modulus \(E_0\) resulting in a low nominal contact pressure when squeezed against a countersurface. In most cases the foam rubber is covered by a thin surface film with the effective elastic modulus \(E_1 > E_0\). We show that the nominal contact pressure may not be high enough for the contact area to percolate and the O-ring seal will leak. For the leakage calculations we use the Persson multiscale contact mechanics theory, and the (modified) Bruggeman effective medium theory for the fluid flow conductivity. The experimental input for the theory are surface roughness power spectrum, which was obtained from stylus topography measurements, and the elastic properties (\(E_0\) and \(E_1\)) of the rubber O-ring. As an application of this calculation method, we have used the preliminary as well as the final results of the laboratory gas tightness tests of the 136 New Small Wheel Micromegas Quadruplets performed at CERN, from February 2019 to May 2021, in the framework of the ATLAS Experiment upgrade. In the integration quality control, a novel method for gas tightness measurement, that we have called “Flow Rate Loss”, has been used as a baseline method.

Graphical Abstract

求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
Tribology Letters
Tribology Letters 工程技术-工程:化工
CiteScore
5.30
自引率
9.40%
发文量
116
审稿时长
2.5 months
期刊介绍: Tribology Letters is devoted to the development of the science of tribology and its applications, particularly focusing on publishing high-quality papers at the forefront of tribological science and that address the fundamentals of friction, lubrication, wear, or adhesion. The journal facilitates communication and exchange of seminal ideas among thousands of practitioners who are engaged worldwide in the pursuit of tribology-based science and technology.
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信