Extraction of gallium from carbon concentrate - Aluminum industry waste

A complex approach to the extraction of gallium from a carbon concentrate (CC), a waste product of the aluminum industry, was considered. Ashing of CC made it possible to remove the main component - carbon and obtain ash, which is an oxide mineral-like compound, from which gallium was leached with solutions of inorganic acids and their mixtures. The maximum degree of leaching (98%) of gallium was achieved with 6 M HCl for ash after ashing the CC at 600 °C. It was shown that Purolite anion exchangers with highly basic tertiary and quaternary ammonium base groups recovered gallium(III) from 2 to 10 M HCl, where the sorption equilibrium was attained after 60 min. The maximum extraction was observed from 6 M HCl. Under optimal conditions, the maximum sorption capacities for gallium(III) were achieved for Purolite A300 (2.7 mmol g⁻¹) and Purolite A500 (2.2 mmol g⁻¹) sorbents. Gallium(III) was quantitatively (99%) eluted from the sorbents with distilled water. Sorption of gallium(III) and its subsequent desorption with water made it possible to separate it from the predominant amounts of transition metal ions: Fe(III), Ni(II), Co(II), Zn(II), V(V) and other cations: Al³⁺, Ca²⁺, Mg²⁺, Na⁺ and K⁺. The addition of sodium hydroxide to the concentration of 200 g L⁻¹ resulted in the cementation of gallium on aluminum gallama (liquid gallium‑aluminum alloy).