{"title":"煤矸石对生物质灰分初始变形温度和气化特性的影响","authors":"Hongli Fan, Fenghai Li, Mingxi Guo, Guopeng Han, Qianqian Guo, Meiling Xu","doi":"10.1002/apj.3050","DOIUrl":null,"url":null,"abstract":"<p>The effects of coal gangue (CG) on the ash initial deformation temperature (IDT) and CO<sub>2</sub> gasification characteristic of biomass (chestnut shell [CS] and soybean straw [SS]) were investigated by ash fusion tester and thermogravimetric analyzer, respectively. The IDTs of CS and SS ashes were low because of the presence of abundant low melting point (MP) airchildite (K<sub>2</sub>Ca(CO<sub>3</sub>)<sub>2</sub>) and arcanite (K<sub>2</sub>SO<sub>4</sub>), and they were efficiently improved by the CG additions of 2%–10% mass ratios. The increases in the IDTs of CS and SS ashes were resulted from the conversions of fairchildite and arcanite into high MP K-Al silicates (kalsilite [KAlSiO<sub>4</sub>], leucite [KAlSi<sub>2</sub>O<sub>6</sub>], etc.). The gasification reactivities of CS/CG mixtures stayed below that of CS, and they decreased with increasing CG mass ratios (4%–10%) and increased with increasing temperatures (900–1000°C). At 900°C, CG addition caused a decrease in the gasification reactivity of SS. When the temperature reached 950°C, the CG addition of 4% mass ratio increased the gasification reactivity of SS instead. The synergistic effect between biomass and CG during cogasification was more significant at low CG mass ratio and high temperature, and the synergistic effect between SS and CG was more intense than that between CS and CG.</p>","PeriodicalId":49237,"journal":{"name":"Asia-Pacific Journal of Chemical Engineering","volume":null,"pages":null},"PeriodicalIF":1.4000,"publicationDate":"2024-02-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Effects of coal gangue on the ash initial deformation temperature and gasification characteristic of biomass\",\"authors\":\"Hongli Fan, Fenghai Li, Mingxi Guo, Guopeng Han, Qianqian Guo, Meiling Xu\",\"doi\":\"10.1002/apj.3050\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<p>The effects of coal gangue (CG) on the ash initial deformation temperature (IDT) and CO<sub>2</sub> gasification characteristic of biomass (chestnut shell [CS] and soybean straw [SS]) were investigated by ash fusion tester and thermogravimetric analyzer, respectively. The IDTs of CS and SS ashes were low because of the presence of abundant low melting point (MP) airchildite (K<sub>2</sub>Ca(CO<sub>3</sub>)<sub>2</sub>) and arcanite (K<sub>2</sub>SO<sub>4</sub>), and they were efficiently improved by the CG additions of 2%–10% mass ratios. The increases in the IDTs of CS and SS ashes were resulted from the conversions of fairchildite and arcanite into high MP K-Al silicates (kalsilite [KAlSiO<sub>4</sub>], leucite [KAlSi<sub>2</sub>O<sub>6</sub>], etc.). The gasification reactivities of CS/CG mixtures stayed below that of CS, and they decreased with increasing CG mass ratios (4%–10%) and increased with increasing temperatures (900–1000°C). At 900°C, CG addition caused a decrease in the gasification reactivity of SS. When the temperature reached 950°C, the CG addition of 4% mass ratio increased the gasification reactivity of SS instead. The synergistic effect between biomass and CG during cogasification was more significant at low CG mass ratio and high temperature, and the synergistic effect between SS and CG was more intense than that between CS and CG.</p>\",\"PeriodicalId\":49237,\"journal\":{\"name\":\"Asia-Pacific Journal of Chemical Engineering\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":1.4000,\"publicationDate\":\"2024-02-25\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Asia-Pacific Journal of Chemical Engineering\",\"FirstCategoryId\":\"5\",\"ListUrlMain\":\"https://onlinelibrary.wiley.com/doi/10.1002/apj.3050\",\"RegionNum\":4,\"RegionCategory\":\"工程技术\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q3\",\"JCRName\":\"ENGINEERING, CHEMICAL\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Asia-Pacific Journal of Chemical Engineering","FirstCategoryId":"5","ListUrlMain":"https://onlinelibrary.wiley.com/doi/10.1002/apj.3050","RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"ENGINEERING, CHEMICAL","Score":null,"Total":0}
Effects of coal gangue on the ash initial deformation temperature and gasification characteristic of biomass
The effects of coal gangue (CG) on the ash initial deformation temperature (IDT) and CO2 gasification characteristic of biomass (chestnut shell [CS] and soybean straw [SS]) were investigated by ash fusion tester and thermogravimetric analyzer, respectively. The IDTs of CS and SS ashes were low because of the presence of abundant low melting point (MP) airchildite (K2Ca(CO3)2) and arcanite (K2SO4), and they were efficiently improved by the CG additions of 2%–10% mass ratios. The increases in the IDTs of CS and SS ashes were resulted from the conversions of fairchildite and arcanite into high MP K-Al silicates (kalsilite [KAlSiO4], leucite [KAlSi2O6], etc.). The gasification reactivities of CS/CG mixtures stayed below that of CS, and they decreased with increasing CG mass ratios (4%–10%) and increased with increasing temperatures (900–1000°C). At 900°C, CG addition caused a decrease in the gasification reactivity of SS. When the temperature reached 950°C, the CG addition of 4% mass ratio increased the gasification reactivity of SS instead. The synergistic effect between biomass and CG during cogasification was more significant at low CG mass ratio and high temperature, and the synergistic effect between SS and CG was more intense than that between CS and CG.
期刊介绍:
Asia-Pacific Journal of Chemical Engineering is aimed at capturing current developments and initiatives in chemical engineering related and specialised areas. Publishing six issues each year, the journal showcases innovative technological developments, providing an opportunity for technology transfer and collaboration.
Asia-Pacific Journal of Chemical Engineering will focus particular attention on the key areas of: Process Application (separation, polymer, catalysis, nanotechnology, electrochemistry, nuclear technology); Energy and Environmental Technology (materials for energy storage and conversion, coal gasification, gas liquefaction, air pollution control, water treatment, waste utilization and management, nuclear waste remediation); and Biochemical Engineering (including targeted drug delivery applications).