{"title":"氧化石墨烯上的聚多巴胺螯合锶可增强聚乳酸/聚丙烯酸骨支架的机械和成骨诱导特性","authors":"Feng Yang, Yun Lin, Saipu Shen, Yulong Gu, C. Shuai, Pei Feng","doi":"10.36922/ijb.1829","DOIUrl":null,"url":null,"abstract":"Poly (lactic acid)/poly (glycolic acid) (LG) bone scaffold exhibits good biocompatibility for bone defect regeneration but lacks satisfactory mechanical and osteogenic induction properties. Here, graphene oxide (GO) was encapsulated by polydopamine (PDA) via self-polymerization of dopamine, and strontium (Sr) was loaded onto GO by the chelation of PDA. The modified GO was added to the LG scaffold prepared via selective laser sintering as a reinforcing phase to improve the mechanical properties and osteogenic induction properties. The results indicated that the tensile and compressive strengths of the scaffold with 1.5 wt% modified GO were 9.49 MPa and 19.22 MPa, respectively, representing 67.08% and 95.33% improvement compared to the LG scaffold. The enhancement mechanisms of the modified GO in the scaffold included crack branching, crack deflection, crack pinning, crack bridging, and pulling out. More importantly, the scaffold with modified GO exhibited superior bioactivity and osteogenic induction properties compared to the LG scaffold, because PDA could chelate calcium ions derived from the surrounding physiological environment, and the calcium ions attracted phosphate ions through electrostatic interactions to promote the apatite layer deposition. Additionally, the presence of Sr in the scaffold promoted the proliferation and differentiation of osteoblasts, thereby improving osteogenic induction properties.","PeriodicalId":48522,"journal":{"name":"International Journal of Bioprinting","volume":null,"pages":null},"PeriodicalIF":6.8000,"publicationDate":"2024-01-12","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Polydopamine chelating strontium on graphene oxide enhances the mechanical and osteogenic induction properties of PLLA/PGA bone scaffold \",\"authors\":\"Feng Yang, Yun Lin, Saipu Shen, Yulong Gu, C. Shuai, Pei Feng\",\"doi\":\"10.36922/ijb.1829\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"Poly (lactic acid)/poly (glycolic acid) (LG) bone scaffold exhibits good biocompatibility for bone defect regeneration but lacks satisfactory mechanical and osteogenic induction properties. Here, graphene oxide (GO) was encapsulated by polydopamine (PDA) via self-polymerization of dopamine, and strontium (Sr) was loaded onto GO by the chelation of PDA. The modified GO was added to the LG scaffold prepared via selective laser sintering as a reinforcing phase to improve the mechanical properties and osteogenic induction properties. The results indicated that the tensile and compressive strengths of the scaffold with 1.5 wt% modified GO were 9.49 MPa and 19.22 MPa, respectively, representing 67.08% and 95.33% improvement compared to the LG scaffold. The enhancement mechanisms of the modified GO in the scaffold included crack branching, crack deflection, crack pinning, crack bridging, and pulling out. More importantly, the scaffold with modified GO exhibited superior bioactivity and osteogenic induction properties compared to the LG scaffold, because PDA could chelate calcium ions derived from the surrounding physiological environment, and the calcium ions attracted phosphate ions through electrostatic interactions to promote the apatite layer deposition. Additionally, the presence of Sr in the scaffold promoted the proliferation and differentiation of osteoblasts, thereby improving osteogenic induction properties.\",\"PeriodicalId\":48522,\"journal\":{\"name\":\"International Journal of Bioprinting\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":6.8000,\"publicationDate\":\"2024-01-12\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"International Journal of Bioprinting\",\"FirstCategoryId\":\"5\",\"ListUrlMain\":\"https://doi.org/10.36922/ijb.1829\",\"RegionNum\":3,\"RegionCategory\":\"医学\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q1\",\"JCRName\":\"ENGINEERING, BIOMEDICAL\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"International Journal of Bioprinting","FirstCategoryId":"5","ListUrlMain":"https://doi.org/10.36922/ijb.1829","RegionNum":3,"RegionCategory":"医学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"ENGINEERING, BIOMEDICAL","Score":null,"Total":0}
引用次数: 0
摘要
聚(乳酸)/聚(乙醇酸)(LG)骨支架在骨缺损再生方面具有良好的生物相容性,但缺乏令人满意的机械和成骨诱导特性。在这里,氧化石墨烯(GO)通过多巴胺的自聚合作用被聚多巴胺(PDA)包裹,锶(Sr)通过 PDA 的螯合作用被负载到 GO 上。通过选择性激光烧结技术制备的 LG 支架中添加了改性 GO 作为增强相,以改善其力学性能和成骨诱导性能。结果表明,含有 1.5 wt% 改性 GO 的支架的拉伸强度和压缩强度分别为 9.49 MPa 和 19.22 MPa,与 LG 支架相比分别提高了 67.08% 和 95.33%。支架中改性 GO 的增强机制包括裂纹分支、裂纹偏转、裂纹针刺、裂纹桥接和拔出。更重要的是,与 LG 支架相比,改性 GO 支架表现出更优越的生物活性和成骨诱导特性,这是因为 PDA 可以螯合周围生理环境中的钙离子,钙离子通过静电作用吸引磷酸盐离子,促进磷灰石层沉积。此外,支架中 Sr 的存在促进了成骨细胞的增殖和分化,从而改善了成骨诱导特性。
Polydopamine chelating strontium on graphene oxide enhances the mechanical and osteogenic induction properties of PLLA/PGA bone scaffold
Poly (lactic acid)/poly (glycolic acid) (LG) bone scaffold exhibits good biocompatibility for bone defect regeneration but lacks satisfactory mechanical and osteogenic induction properties. Here, graphene oxide (GO) was encapsulated by polydopamine (PDA) via self-polymerization of dopamine, and strontium (Sr) was loaded onto GO by the chelation of PDA. The modified GO was added to the LG scaffold prepared via selective laser sintering as a reinforcing phase to improve the mechanical properties and osteogenic induction properties. The results indicated that the tensile and compressive strengths of the scaffold with 1.5 wt% modified GO were 9.49 MPa and 19.22 MPa, respectively, representing 67.08% and 95.33% improvement compared to the LG scaffold. The enhancement mechanisms of the modified GO in the scaffold included crack branching, crack deflection, crack pinning, crack bridging, and pulling out. More importantly, the scaffold with modified GO exhibited superior bioactivity and osteogenic induction properties compared to the LG scaffold, because PDA could chelate calcium ions derived from the surrounding physiological environment, and the calcium ions attracted phosphate ions through electrostatic interactions to promote the apatite layer deposition. Additionally, the presence of Sr in the scaffold promoted the proliferation and differentiation of osteoblasts, thereby improving osteogenic induction properties.
期刊介绍:
The International Journal of Bioprinting is a globally recognized publication that focuses on the advancements, scientific discoveries, and practical implementations of Bioprinting. Bioprinting, in simple terms, involves the utilization of 3D printing technology and materials that contain living cells or biological components to fabricate tissues or other biotechnological products. Our journal encompasses interdisciplinary research that spans across technology, science, and clinical applications within the expansive realm of Bioprinting.