Procedure for evaluation of LNG CCS with reference vessel using nonlinear dynamic analysis

This paper presents a procedure for evaluating the structural safety of Liquefied Natural Gas (LNG) Cargo Containment System (CCS) against sloshing load by comparing the results of linear and nonlinear dynamic structural strength analysis with those of verified reference vessels. This comparative procedure indirectly considers (1) limitation of implementing real physical phenomena in model experiments including the Froude scaling method, density ratio, etc., (2) assumptions in statistical analysis for calculating design loads, and (3) complicated effects not implemented in nonlinear dynamic analysis such as phase transition between liquid and gas, hull deflection, and the detailed geometry of the CCS, among others. The uncertainties in sloshing model experiments and statistical analysis can be addressed by introducing the pressure correction factors, which make the linear design loads of the reference vessel satisfy the CCS’s capacity. Finally, the structural nonlinearity, which was not accounted for in the nonlinear dynamic analysis, can be taken into consideration through a comparison of the usage factors from nonlinear dynamic analysis. To apply the proposed structural assessment procedure, the GTT NO96 series were selected and applied to two failure modes. In the application of this procedure, the Triangular Impulse Response Function (TIRF) method was adopted, to efficiently calculate numerous linear dynamic structural strength analyses required for Dynamic Amplification Factor (DAF). Through this application applying larger sloshing loads to the reinforced NO96 CCS of the target vessel compared to the reference vessel, the feasibility of this procedure was shown.