为面巾产品开发物理柔软度模型

IF 1.3 4区农林科学 Q2 MATERIALS SCIENCE, PAPER & WOOD

Bioresources Pub Date : 2023-11-08 DOI:10.15376/biores.19.1.116-133

Ji Min Lee, Y. Ko, Byoung-Geun Moon, Y. Lee, Soon Wan Kweon, H. Kim

{"title":"为面巾产品开发物理柔软度模型","authors":"Ji Min Lee, Y. Ko, Byoung-Geun Moon, Y. Lee, Soon Wan Kweon, H. Kim","doi":"10.15376/biores.19.1.116-133","DOIUrl":null,"url":null,"abstract":"A series of physical softness models were developed for facial tissue products. To this end, subjective softness data were obtained by panelists by means of round-robin pair-comparison methods. Overall softness was found to mainly consist of bulk and surface softness. Bulk softness was determined by measuring the tensile modulus (TM) from tensile testing. In contrast, the surface softness considered the mean absolute deviation (RMAD) from the roughness average (Ra) and the mean absolute deviation (FMAD) from the average coefficient of friction (), respectively, which were determined by profilometry. The developed models exhibited strong correlations with subjective softness. In particular, surface softness was found to contribute more to the overall softness than bulk softness. Overall, the developed models can serve as guidance for developing tissue products.","PeriodicalId":9172,"journal":{"name":"Bioresources","volume":"53 1","pages":""},"PeriodicalIF":1.3000,"publicationDate":"2023-11-08","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Developing physical softness models for facial tissue products\",\"authors\":\"Ji Min Lee, Y. Ko, Byoung-Geun Moon, Y. Lee, Soon Wan Kweon, H. Kim\",\"doi\":\"10.15376/biores.19.1.116-133\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"A series of physical softness models were developed for facial tissue products. To this end, subjective softness data were obtained by panelists by means of round-robin pair-comparison methods. Overall softness was found to mainly consist of bulk and surface softness. Bulk softness was determined by measuring the tensile modulus (TM) from tensile testing. In contrast, the surface softness considered the mean absolute deviation (RMAD) from the roughness average (Ra) and the mean absolute deviation (FMAD) from the average coefficient of friction (), respectively, which were determined by profilometry. The developed models exhibited strong correlations with subjective softness. In particular, surface softness was found to contribute more to the overall softness than bulk softness. Overall, the developed models can serve as guidance for developing tissue products.\",\"PeriodicalId\":9172,\"journal\":{\"name\":\"Bioresources\",\"volume\":\"53 1\",\"pages\":\"\"},\"PeriodicalIF\":1.3000,\"publicationDate\":\"2023-11-08\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Bioresources\",\"FirstCategoryId\":\"88\",\"ListUrlMain\":\"https://doi.org/10.15376/biores.19.1.116-133\",\"RegionNum\":4,\"RegionCategory\":\"农林科学\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q2\",\"JCRName\":\"MATERIALS SCIENCE, PAPER & WOOD\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Bioresources","FirstCategoryId":"88","ListUrlMain":"https://doi.org/10.15376/biores.19.1.116-133","RegionNum":4,"RegionCategory":"农林科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"MATERIALS SCIENCE, PAPER & WOOD","Score":null,"Total":0}

引用次数: 0

摘要

为面巾产品开发了一系列物理柔软度模型。为此，小组成员通过循环配对比较法获得了主观柔软度数据。研究发现，整体柔软度主要由体积柔软度和表面柔软度组成。体积柔软度是通过拉伸测试测量拉伸模量（TM）来确定的。而表面软度则分别考虑了粗糙度平均值（Ra）的平均绝对偏差（RMAD）和摩擦系数平均值（FMAD）的平均绝对偏差（FMAD），它们都是通过轮廓仪测定的。所开发的模型与主观软度有很强的相关性。尤其是表面柔软度对整体柔软度的贡献要大于整体柔软度。总之，所开发的模型可作为开发卫生纸产品的指导。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

Developing physical softness models for facial tissue products

A series of physical softness models were developed for facial tissue products. To this end, subjective softness data were obtained by panelists by means of round-robin pair-comparison methods. Overall softness was found to mainly consist of bulk and surface softness. Bulk softness was determined by measuring the tensile modulus (TM) from tensile testing. In contrast, the surface softness considered the mean absolute deviation (RMAD) from the roughness average (Ra) and the mean absolute deviation (FMAD) from the average coefficient of friction (), respectively, which were determined by profilometry. The developed models exhibited strong correlations with subjective softness. In particular, surface softness was found to contribute more to the overall softness than bulk softness. Overall, the developed models can serve as guidance for developing tissue products.

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

Bioresources 工程技术-材料科学：纸与木材

CiteScore

2.90

自引率

13.30%

发文量

397

审稿时长

2.3 months

期刊介绍： The purpose of BioResources is to promote scientific discourse and to foster scientific developments related to sustainable manufacture involving lignocellulosic or woody biomass resources, including wood and agricultural residues. BioResources will focus on advances in science and technology. Emphasis will be placed on bioproducts, bioenergy, papermaking technology, wood products, new manufacturing materials, composite structures, and chemicals derived from lignocellulosic biomass.