Extraction-depended and thermally-modulated physical and chemical properties of powders produced from cranberry pomace extracts

Recovering bioactives from botanical by-products in the form of powders has been attempted through a number of multidirectional approaches. Yet understanding the processing of such plant formulations requires dedicated research owing to the manifold factors shaping the quality of powders. Therefore, the study aimed at production of cranberry powders from pomace extracts and to evaluate how different solvent type, carriers and drying techniques modulate their physico-chemical properties. Freeze- and vacuum drying significantly differentiated samples in terms of physical properties, while the extraction solvent and carrier type had substantial impact on chemical ones. For carrier-added products pomace extraction with acidified 50% ethanol resulted in the highest content of identified phenolics in powders (up to 5.87 g · 100 g⁻¹ dry matter), while 30% acetone in the lowest (on average, 3.94 g · 100 g⁻¹ dry matter). Acetone extraction strengthened the formation of hydroxymethyl-L-furfural that was higher when compared to acidified 50% ethanol, while trace amounts were reported for non-acidified counterpart. Similar observation was made in the case of flavan-3-ols. Addition of carriers during powders production led to the lower hydroxymethyl-L-furfural formation even down to 74% with regard to carrier-free samples. The study confirmed feasibility of managing cranberry pomace into high-value powders in extraction-depended and thermally-modulated quality matter.