田口方法在基于粗糙度的水刀表面形貌控制中的应用

IF 7.5 Q1 CHEMISTRY, PHYSICAL
Jing Xie , Yang Qiao , Zu'an Wang , Yuanshen Qi , Qingfeng Xu , Keren Shemtov-Yona , Pengwan Chen , Daniel Rittel
{"title":"田口方法在基于粗糙度的水刀表面形貌控制中的应用","authors":"Jing Xie ,&nbsp;Yang Qiao ,&nbsp;Zu'an Wang ,&nbsp;Yuanshen Qi ,&nbsp;Qingfeng Xu ,&nbsp;Keren Shemtov-Yona ,&nbsp;Pengwan Chen ,&nbsp;Daniel Rittel","doi":"10.1016/j.apsadv.2023.100548","DOIUrl":null,"url":null,"abstract":"<div><p>Pure waterjet surface treatment without abrasive particles has a promising application in the biomedical field, because it induces compressive residual stresses on a metal surface and never leaves the tiny hard particles. In this work, the influence of operation pressure, standoff distance and the number of paths of the waterjet on the surface topography as well as the hardness was studied using the Taguchi method. The results showed that the most essential parameter is the operation pressure. By tuning the operation pressure from 100 to 300 MPa, the surface of Ti6Al4V specimens can be smoothed, roughened or damaged; when the surface layer is eroded, the new-born surface exhibits a clear stochastic nature accompanied by microvoids. The standoff distance benefits finer controlling the height parameters, whilst the number of paths affects the waviness. The hardening effect generated by the waterjet impingement extends to a few hundred-micron depth of the specimens, and the peak value of microhardness was found at a depth of 70 μm, which is an increase by greater than 20 %. The roughness parameters of Arithmetical mean height (<em>Sa</em>), Skewness (<em>Ssk</em>), Auto-correlation length (<em>Sal</em>), and Developed interfacial area ratio (<em>Sdr</em>) as a set are recommended to characterize the biomaterial's surface. The present research results promote the application of waterjet treatment in the field of fine-tuning biomaterial surface morphology.</p></div>","PeriodicalId":34303,"journal":{"name":"Applied Surface Science Advances","volume":null,"pages":null},"PeriodicalIF":7.5000,"publicationDate":"2023-12-12","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://www.sciencedirect.com/science/article/pii/S2666523923001824/pdfft?md5=da679ca5be1528aef52e029ca79eb134&pid=1-s2.0-S2666523923001824-main.pdf","citationCount":"0","resultStr":"{\"title\":\"Application of the Taguchi method to areal roughness-based surface topography control by waterjet treatments\",\"authors\":\"Jing Xie ,&nbsp;Yang Qiao ,&nbsp;Zu'an Wang ,&nbsp;Yuanshen Qi ,&nbsp;Qingfeng Xu ,&nbsp;Keren Shemtov-Yona ,&nbsp;Pengwan Chen ,&nbsp;Daniel Rittel\",\"doi\":\"10.1016/j.apsadv.2023.100548\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<div><p>Pure waterjet surface treatment without abrasive particles has a promising application in the biomedical field, because it induces compressive residual stresses on a metal surface and never leaves the tiny hard particles. In this work, the influence of operation pressure, standoff distance and the number of paths of the waterjet on the surface topography as well as the hardness was studied using the Taguchi method. The results showed that the most essential parameter is the operation pressure. By tuning the operation pressure from 100 to 300 MPa, the surface of Ti6Al4V specimens can be smoothed, roughened or damaged; when the surface layer is eroded, the new-born surface exhibits a clear stochastic nature accompanied by microvoids. The standoff distance benefits finer controlling the height parameters, whilst the number of paths affects the waviness. The hardening effect generated by the waterjet impingement extends to a few hundred-micron depth of the specimens, and the peak value of microhardness was found at a depth of 70 μm, which is an increase by greater than 20 %. The roughness parameters of Arithmetical mean height (<em>Sa</em>), Skewness (<em>Ssk</em>), Auto-correlation length (<em>Sal</em>), and Developed interfacial area ratio (<em>Sdr</em>) as a set are recommended to characterize the biomaterial's surface. The present research results promote the application of waterjet treatment in the field of fine-tuning biomaterial surface morphology.</p></div>\",\"PeriodicalId\":34303,\"journal\":{\"name\":\"Applied Surface Science Advances\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":7.5000,\"publicationDate\":\"2023-12-12\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"https://www.sciencedirect.com/science/article/pii/S2666523923001824/pdfft?md5=da679ca5be1528aef52e029ca79eb134&pid=1-s2.0-S2666523923001824-main.pdf\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Applied Surface Science Advances\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://www.sciencedirect.com/science/article/pii/S2666523923001824\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q1\",\"JCRName\":\"CHEMISTRY, PHYSICAL\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Applied Surface Science Advances","FirstCategoryId":"1085","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S2666523923001824","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"CHEMISTRY, PHYSICAL","Score":null,"Total":0}
引用次数: 0

摘要

不含磨料颗粒的纯水喷射表面处理在生物医学领域有着广阔的应用前景,因为它能在金属表面产生压缩残余应力,而且不会留下微小的硬质颗粒。在这项工作中,采用田口方法研究了操作压力、间距和水刀路径数对表面形貌和硬度的影响。结果表明,最重要的参数是操作压力。通过调整 100 至 300 MPa 的操作压力,Ti6Al4V 试样的表面可以被磨平、粗糙化或损坏;当表层被侵蚀时,新生表面会呈现出明显的随机性,并伴有微空洞。对峙距离有利于更精细地控制高度参数,而路径数量则会影响波浪度。水刀撞击产生的硬化效应延伸到试样的几百微米深度,微硬度的峰值出现在 70 μm 深度,增加了 20% 以上。建议将算术平均高度(Sa)、偏斜度(Ssk)、自相关长度(Sal)和显影界面面积比(Sdr)作为一组粗糙度参数来表征生物材料的表面。本研究成果促进了水刀处理在微调生物材料表面形态领域的应用。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
Application of the Taguchi method to areal roughness-based surface topography control by waterjet treatments

Pure waterjet surface treatment without abrasive particles has a promising application in the biomedical field, because it induces compressive residual stresses on a metal surface and never leaves the tiny hard particles. In this work, the influence of operation pressure, standoff distance and the number of paths of the waterjet on the surface topography as well as the hardness was studied using the Taguchi method. The results showed that the most essential parameter is the operation pressure. By tuning the operation pressure from 100 to 300 MPa, the surface of Ti6Al4V specimens can be smoothed, roughened or damaged; when the surface layer is eroded, the new-born surface exhibits a clear stochastic nature accompanied by microvoids. The standoff distance benefits finer controlling the height parameters, whilst the number of paths affects the waviness. The hardening effect generated by the waterjet impingement extends to a few hundred-micron depth of the specimens, and the peak value of microhardness was found at a depth of 70 μm, which is an increase by greater than 20 %. The roughness parameters of Arithmetical mean height (Sa), Skewness (Ssk), Auto-correlation length (Sal), and Developed interfacial area ratio (Sdr) as a set are recommended to characterize the biomaterial's surface. The present research results promote the application of waterjet treatment in the field of fine-tuning biomaterial surface morphology.

求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
CiteScore
8.10
自引率
1.60%
发文量
128
审稿时长
66 days
期刊介绍:
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信