{"title":"非高斯珩磨表面对接触和流动特性影响的研究","authors":"Yihu Tang, Li Huang, Xianghui Meng","doi":"10.1108/ilt-07-2023-0198","DOIUrl":null,"url":null,"abstract":"<h3>Purpose</h3>\n<p>The contact and lubrication performances, which were previously estimated assuming a Gaussian surface, are insufficient due to the non-Gaussian surface characteristics of the honing liner. The purpose of this study is to analyze the liner honing surface and examine its effects on the contact and flow performance.</p><!--/ Abstract__block -->\n<h3>Design/methodology/approach</h3>\n<p>The fast Fourier transform (FFT) method was used to generate the liner honing texture. Subsequently, an elastoplastic contact model based on boundary element theory was constructed and simulated for the honing surface. The results were compared with those obtained using a Gaussian surface. In addition, flow factors of the honing surfaces were also compared.</p><!--/ Abstract__block -->\n<h3>Findings</h3>\n<p>The contact pressure and flow factors demonstrate significant disparities when dealing with non-Gaussian surfaces. In the deterministic model, the pressure exhibits considerably diminished magnitudes and a more evenly distribution. Moreover, when the gap between surfaces is narrow, the discrepancy in flow factor across different directions on the real honing surface becomes more prominent compared with the Gaussian surface.</p><!--/ Abstract__block -->\n<h3>Originality/value</h3>\n<p>The model incorporates the influence of the non-Gaussian honing surface, thereby enabling more accurate prediction.</p><!--/ Abstract__block -->\n<h3>Peer review</h3>\n<p>The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-07-2023-0198/</p><!--/ Abstract__block -->","PeriodicalId":13523,"journal":{"name":"Industrial Lubrication and Tribology","volume":"19 1","pages":""},"PeriodicalIF":1.5000,"publicationDate":"2023-12-14","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Study on the influence of non-Gaussian honing surface on contact and flow characteristics\",\"authors\":\"Yihu Tang, Li Huang, Xianghui Meng\",\"doi\":\"10.1108/ilt-07-2023-0198\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<h3>Purpose</h3>\\n<p>The contact and lubrication performances, which were previously estimated assuming a Gaussian surface, are insufficient due to the non-Gaussian surface characteristics of the honing liner. The purpose of this study is to analyze the liner honing surface and examine its effects on the contact and flow performance.</p><!--/ Abstract__block -->\\n<h3>Design/methodology/approach</h3>\\n<p>The fast Fourier transform (FFT) method was used to generate the liner honing texture. Subsequently, an elastoplastic contact model based on boundary element theory was constructed and simulated for the honing surface. The results were compared with those obtained using a Gaussian surface. In addition, flow factors of the honing surfaces were also compared.</p><!--/ Abstract__block -->\\n<h3>Findings</h3>\\n<p>The contact pressure and flow factors demonstrate significant disparities when dealing with non-Gaussian surfaces. In the deterministic model, the pressure exhibits considerably diminished magnitudes and a more evenly distribution. Moreover, when the gap between surfaces is narrow, the discrepancy in flow factor across different directions on the real honing surface becomes more prominent compared with the Gaussian surface.</p><!--/ Abstract__block -->\\n<h3>Originality/value</h3>\\n<p>The model incorporates the influence of the non-Gaussian honing surface, thereby enabling more accurate prediction.</p><!--/ Abstract__block -->\\n<h3>Peer review</h3>\\n<p>The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-07-2023-0198/</p><!--/ Abstract__block -->\",\"PeriodicalId\":13523,\"journal\":{\"name\":\"Industrial Lubrication and Tribology\",\"volume\":\"19 1\",\"pages\":\"\"},\"PeriodicalIF\":1.5000,\"publicationDate\":\"2023-12-14\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Industrial Lubrication and Tribology\",\"FirstCategoryId\":\"5\",\"ListUrlMain\":\"https://doi.org/10.1108/ilt-07-2023-0198\",\"RegionNum\":4,\"RegionCategory\":\"工程技术\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q3\",\"JCRName\":\"ENGINEERING, MECHANICAL\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Industrial Lubrication and Tribology","FirstCategoryId":"5","ListUrlMain":"https://doi.org/10.1108/ilt-07-2023-0198","RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"ENGINEERING, MECHANICAL","Score":null,"Total":0}
Study on the influence of non-Gaussian honing surface on contact and flow characteristics
Purpose
The contact and lubrication performances, which were previously estimated assuming a Gaussian surface, are insufficient due to the non-Gaussian surface characteristics of the honing liner. The purpose of this study is to analyze the liner honing surface and examine its effects on the contact and flow performance.
Design/methodology/approach
The fast Fourier transform (FFT) method was used to generate the liner honing texture. Subsequently, an elastoplastic contact model based on boundary element theory was constructed and simulated for the honing surface. The results were compared with those obtained using a Gaussian surface. In addition, flow factors of the honing surfaces were also compared.
Findings
The contact pressure and flow factors demonstrate significant disparities when dealing with non-Gaussian surfaces. In the deterministic model, the pressure exhibits considerably diminished magnitudes and a more evenly distribution. Moreover, when the gap between surfaces is narrow, the discrepancy in flow factor across different directions on the real honing surface becomes more prominent compared with the Gaussian surface.
Originality/value
The model incorporates the influence of the non-Gaussian honing surface, thereby enabling more accurate prediction.
Peer review
The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-07-2023-0198/
期刊介绍：
Industrial Lubrication and Tribology provides a broad coverage of the materials and techniques employed in tribology. It contains a firm technical news element which brings together and promotes best practice in the three disciplines of tribology, which comprise lubrication, wear and friction. ILT also follows the progress of research into advanced lubricants, bearings, seals, gears and related machinery parts, as well as materials selection. A double-blind peer review process involving the editor and other subject experts ensures the content''s validity and relevance.
求助内容：
应助结果提醒方式：
京公网安备 11010802042870号
