通过光伏应用的SCAPS模拟研究温度对异质结构CIS/Cds电性能的影响

IF 3.6 Q2 MATERIALS SCIENCE, MULTIDISCIPLINARY
Abass Akande Faremi, Olusayo Olubosede, Ayodeji Olalekan Salau, Samuel Olakunle Adigbo, Peter Apata Olubambi, Ezekiel Lawan
{"title":"通过光伏应用的SCAPS模拟研究温度对异质结构CIS/Cds电性能的影响","authors":"Abass Akande Faremi,&nbsp;Olusayo Olubosede,&nbsp;Ayodeji Olalekan Salau,&nbsp;Samuel Olakunle Adigbo,&nbsp;Peter Apata Olubambi,&nbsp;Ezekiel Lawan","doi":"10.1007/s40243-023-00244-5","DOIUrl":null,"url":null,"abstract":"<div><p>Renewable energy research has received tremendous attention in recent years in a quest to circumvent the current global energy crisis. This study carefully selected and simulated the copper indium sulfur ternary compound semiconductor material with cadmium sulfide owing to their advantage in photovoltaic applications. Despite the potential of the materials in photovoltaic devices, the causes of degradation in the photovoltaic efficiency using such compound semiconductor materials have not really been investigated. However, electrical parameters of the materials such as open circuit voltage, short circuit current density, and fill factor have been extensively studied and reported as major causes of degradation in materials’ efficiency. Furthermore, identifying such electrical characteristics as a primary degradation mechanism in solar cells, this study work is an ardent effort that investigates the materials' electrical behavior as a cure to the degradation associated with compound semiconductor-based photovoltaic. In this study, we numerically characterized the electrical properties such as fill factor, open circuit voltage, short circuit current density, power conversion efficiency, net recombination rate, net generation rate, generation current density, recombination current density, hole current density, electrons current density, energy band diagram, capacitance–voltage, electric field strength of the heterostructured CIS/CdS compound semiconductor material using SCAP-1D. We also investigated the effect of temperature on the electrical properties of heterostructured materials. The obtained results reveal the uniformity of the total current density in the material despite the exponential decrease in the electron current density and the exponential increase in hole current density. The extracted solar cell parameters of the heterostructured CIS/CdS at 300 K are 18.6% for PCE, 64.8% for FF, 0.898 V for <i>V</i><sub>oc</sub>, and 32 mA cm<sup>−2</sup> for <i>J</i><sub>sc</sub>. After the investigation of the effect of temperature on the CIS/CdS compound semiconductor material, it was observed that the solar cell was most efficient at 300 K. The energy band gap of the CIS/CdS compound semiconductor material shrinks with an increase in temperature. The highest net recombination rate and recombination current is at 400 K, while the net generation rate and generation current density are independent of temperature. The study, on the other hand, gave insights into the potential degradation process, and utilizing the study’s findings could provide photovoltaic degradation remediation.</p></div>","PeriodicalId":692,"journal":{"name":"Materials for Renewable and Sustainable Energy","volume":"12 3","pages":"235 - 246"},"PeriodicalIF":3.6000,"publicationDate":"2023-11-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://link.springer.com/content/pdf/10.1007/s40243-023-00244-5.pdf","citationCount":"0","resultStr":"{\"title\":\"Variability of temperature on the electrical properties of heterostructured CIS/Cds through SCAPS simulation for photovoltaic applications\",\"authors\":\"Abass Akande Faremi,&nbsp;Olusayo Olubosede,&nbsp;Ayodeji Olalekan Salau,&nbsp;Samuel Olakunle Adigbo,&nbsp;Peter Apata Olubambi,&nbsp;Ezekiel Lawan\",\"doi\":\"10.1007/s40243-023-00244-5\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<div><p>Renewable energy research has received tremendous attention in recent years in a quest to circumvent the current global energy crisis. This study carefully selected and simulated the copper indium sulfur ternary compound semiconductor material with cadmium sulfide owing to their advantage in photovoltaic applications. Despite the potential of the materials in photovoltaic devices, the causes of degradation in the photovoltaic efficiency using such compound semiconductor materials have not really been investigated. However, electrical parameters of the materials such as open circuit voltage, short circuit current density, and fill factor have been extensively studied and reported as major causes of degradation in materials’ efficiency. Furthermore, identifying such electrical characteristics as a primary degradation mechanism in solar cells, this study work is an ardent effort that investigates the materials' electrical behavior as a cure to the degradation associated with compound semiconductor-based photovoltaic. In this study, we numerically characterized the electrical properties such as fill factor, open circuit voltage, short circuit current density, power conversion efficiency, net recombination rate, net generation rate, generation current density, recombination current density, hole current density, electrons current density, energy band diagram, capacitance–voltage, electric field strength of the heterostructured CIS/CdS compound semiconductor material using SCAP-1D. We also investigated the effect of temperature on the electrical properties of heterostructured materials. The obtained results reveal the uniformity of the total current density in the material despite the exponential decrease in the electron current density and the exponential increase in hole current density. The extracted solar cell parameters of the heterostructured CIS/CdS at 300 K are 18.6% for PCE, 64.8% for FF, 0.898 V for <i>V</i><sub>oc</sub>, and 32 mA cm<sup>−2</sup> for <i>J</i><sub>sc</sub>. After the investigation of the effect of temperature on the CIS/CdS compound semiconductor material, it was observed that the solar cell was most efficient at 300 K. The energy band gap of the CIS/CdS compound semiconductor material shrinks with an increase in temperature. The highest net recombination rate and recombination current is at 400 K, while the net generation rate and generation current density are independent of temperature. The study, on the other hand, gave insights into the potential degradation process, and utilizing the study’s findings could provide photovoltaic degradation remediation.</p></div>\",\"PeriodicalId\":692,\"journal\":{\"name\":\"Materials for Renewable and Sustainable Energy\",\"volume\":\"12 3\",\"pages\":\"235 - 246\"},\"PeriodicalIF\":3.6000,\"publicationDate\":\"2023-11-25\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"https://link.springer.com/content/pdf/10.1007/s40243-023-00244-5.pdf\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Materials for Renewable and Sustainable Energy\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://link.springer.com/article/10.1007/s40243-023-00244-5\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q2\",\"JCRName\":\"MATERIALS SCIENCE, MULTIDISCIPLINARY\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Materials for Renewable and Sustainable Energy","FirstCategoryId":"1085","ListUrlMain":"https://link.springer.com/article/10.1007/s40243-023-00244-5","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"MATERIALS SCIENCE, MULTIDISCIPLINARY","Score":null,"Total":0}
引用次数: 0

摘要

近年来,为了规避当前的全球能源危机,可再生能源的研究受到了极大的关注。考虑到硫化镉在光伏应用中的优势,本研究对铜铟硫三元化合物半导体材料进行了精心选择和模拟。尽管这种材料在光伏器件中具有潜力,但使用这种化合物半导体材料导致光伏效率下降的原因尚未得到真正的研究。然而,材料的电气参数,如开路电压、短路电流密度和填充因子已经被广泛研究和报道为材料效率下降的主要原因。此外,将这种电学特性确定为太阳能电池的主要降解机制,本研究工作是一项积极的努力,旨在研究材料的电学行为,以治疗与化合物半导体光伏相关的降解。本研究利用SCAP-1D对异质结构CIS/CdS复合半导体材料的填充系数、开路电压、短路电流密度、功率转换效率、净复合率、净产生率、产生电流密度、复合电流密度、空穴电流密度、电子电流密度、能带图、电容电压、电场强度等电学性能进行了数值表征。我们还研究了温度对异质结构材料电性能的影响。所得结果表明,尽管电子电流密度呈指数下降,空穴电流密度呈指数上升,但材料中的总电流密度是均匀的。在300 K时,异质结构CIS/CdS的太阳能电池参数为PCE 18.6%, FF 64.8%, Voc 0.898 V, Jsc 32 mA cm−2。研究了温度对CIS/CdS复合半导体材料的影响,发现太阳能电池在300 K时效率最高。CIS/CdS复合半导体材料的能带隙随着温度的升高而缩小。净复合率和复合电流在400 K时最高,而净生成率和生成电流密度与温度无关。另一方面,该研究揭示了潜在的降解过程,利用该研究结果可以提供光伏降解修复。
本文章由计算机程序翻译,如有差异,请以英文原文为准。

Variability of temperature on the electrical properties of heterostructured CIS/Cds through SCAPS simulation for photovoltaic applications

Variability of temperature on the electrical properties of heterostructured CIS/Cds through SCAPS simulation for photovoltaic applications

Renewable energy research has received tremendous attention in recent years in a quest to circumvent the current global energy crisis. This study carefully selected and simulated the copper indium sulfur ternary compound semiconductor material with cadmium sulfide owing to their advantage in photovoltaic applications. Despite the potential of the materials in photovoltaic devices, the causes of degradation in the photovoltaic efficiency using such compound semiconductor materials have not really been investigated. However, electrical parameters of the materials such as open circuit voltage, short circuit current density, and fill factor have been extensively studied and reported as major causes of degradation in materials’ efficiency. Furthermore, identifying such electrical characteristics as a primary degradation mechanism in solar cells, this study work is an ardent effort that investigates the materials' electrical behavior as a cure to the degradation associated with compound semiconductor-based photovoltaic. In this study, we numerically characterized the electrical properties such as fill factor, open circuit voltage, short circuit current density, power conversion efficiency, net recombination rate, net generation rate, generation current density, recombination current density, hole current density, electrons current density, energy band diagram, capacitance–voltage, electric field strength of the heterostructured CIS/CdS compound semiconductor material using SCAP-1D. We also investigated the effect of temperature on the electrical properties of heterostructured materials. The obtained results reveal the uniformity of the total current density in the material despite the exponential decrease in the electron current density and the exponential increase in hole current density. The extracted solar cell parameters of the heterostructured CIS/CdS at 300 K are 18.6% for PCE, 64.8% for FF, 0.898 V for Voc, and 32 mA cm−2 for Jsc. After the investigation of the effect of temperature on the CIS/CdS compound semiconductor material, it was observed that the solar cell was most efficient at 300 K. The energy band gap of the CIS/CdS compound semiconductor material shrinks with an increase in temperature. The highest net recombination rate and recombination current is at 400 K, while the net generation rate and generation current density are independent of temperature. The study, on the other hand, gave insights into the potential degradation process, and utilizing the study’s findings could provide photovoltaic degradation remediation.

求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
Materials for Renewable and Sustainable Energy
Materials for Renewable and Sustainable Energy MATERIALS SCIENCE, MULTIDISCIPLINARY-
CiteScore
7.90
自引率
2.20%
发文量
8
审稿时长
13 weeks
期刊介绍: Energy is the single most valuable resource for human activity and the basis for all human progress. Materials play a key role in enabling technologies that can offer promising solutions to achieve renewable and sustainable energy pathways for the future. Materials for Renewable and Sustainable Energy has been established to be the world''s foremost interdisciplinary forum for publication of research on all aspects of the study of materials for the deployment of renewable and sustainable energy technologies. The journal covers experimental and theoretical aspects of materials and prototype devices for sustainable energy conversion, storage, and saving, together with materials needed for renewable fuel production. It publishes reviews, original research articles, rapid communications, and perspectives. All manuscripts are peer-reviewed for scientific quality. Topics include: 1. MATERIALS for renewable energy storage and conversion: Batteries, Supercapacitors, Fuel cells, Hydrogen storage, and Photovoltaics and solar cells. 2. MATERIALS for renewable and sustainable fuel production: Hydrogen production and fuel generation from renewables (catalysis), Solar-driven reactions to hydrogen and fuels from renewables (photocatalysis), Biofuels, and Carbon dioxide sequestration and conversion. 3. MATERIALS for energy saving: Thermoelectrics, Novel illumination sources for efficient lighting, and Energy saving in buildings. 4. MATERIALS modeling and theoretical aspects. 5. Advanced characterization techniques of MATERIALS Materials for Renewable and Sustainable Energy is committed to upholding the integrity of the scientific record. As a member of the Committee on Publication Ethics (COPE) the journal will follow the COPE guidelines on how to deal with potential acts of misconduct. Authors should refrain from misrepresenting research results which could damage the trust in the journal and ultimately the entire scientific endeavor. Maintaining integrity of the research and its presentation can be achieved by following the rules of good scientific practice as detailed here: https://www.springer.com/us/editorial-policies
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信