Study on modified VAc-VeoVa10 latex prepared by soap-free emulsion polymerization

Modified latex is prepared via the soap-free emulsion polymerization of ethyl acetate (VAc) and vinyl versatate (VeoVa10). DFHMA is used as modified monomers. The composite surfactants of SR-10 and ANPEO-10 are used as the composite emulsifiers. The polymerization is initiated by potassium sulfate (KPS). The structure of latex film was characterized by Fourier transform infrared spectroscopy (FTIR). The latex films were tested by thermogravimetric analysis (TGA), differential scanning calorimetry (DSC) and contact angle (CA) determinator. The particle size of the latex emulsion particle size is determined by the Zetatrac dynamic light scatter. Results show that the optimum condition of preparing the modified latex can be obtained, i.e. the amount of emulsifier is 4.0%; the mass ratio of SR-10 to ANPEO-10 is 1:1; the amount of initiator is 0.5%; the mass ratio ofVAc to VeoVa10 is 1:1; the amount of DFHMA is 5.0%. The appearance of the latex is blue and translucent with a small particle size. The conversion rate is more than 98%. Compared with the conventional latex, the hydrophobicity and heat resistance of the film have been improved. Moreover, the latex has good chemical stability and mechanical stability.