石墨烯基涂层3D打印工艺对烧结钕铁硼磁体残余和腐蚀的影响

IF 2.3 4区工程技术 Q3 ENGINEERING, MANUFACTURING

3D Printing and Additive Manufacturing Pub Date : 2023-11-06 DOI:10.1089/3dp.2023.0151

Julio Cesar Serafim Casini, Isolda Costa, Rubens Nunes de Faria

{"title":"石墨烯基涂层3D打印工艺对烧结钕铁硼磁体残余和腐蚀的影响","authors":"Julio Cesar Serafim Casini, Isolda Costa, Rubens Nunes de Faria","doi":"10.1089/3dp.2023.0151","DOIUrl":null,"url":null,"abstract":"This study describes a 3D fused deposition modeling (FDM) printing process using a graphene-impregnated polylactic acid (G-PLA) filament to create a new type of rigid, plastic, nonconductive, and anticorrosion layer. Therefore, the possibility of 3D printing a plastic layer using FDM methods is demonstrated herein. A commercial magnet such as N35 NdFeB can be used to produce an efficient shielding film by additive manufacturing. As the coating layer thickness increases, the remanence decreases from 1.17 to 1.01 T for the G-PLA coating. Visual tests were performed after exposure to all aqueous NaCl test solutions (0.5 and 1 M), and no evidence of corrosion of the coating was obtained.","PeriodicalId":54341,"journal":{"name":"3D Printing and Additive Manufacturing","volume":"22 4","pages":"0"},"PeriodicalIF":2.3000,"publicationDate":"2023-11-06","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Effect of Graphene-Based Coating 3D Printing Process on the Remanence and Corrosion of Sintered NdFeB Magnets\",\"authors\":\"Julio Cesar Serafim Casini, Isolda Costa, Rubens Nunes de Faria\",\"doi\":\"10.1089/3dp.2023.0151\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"This study describes a 3D fused deposition modeling (FDM) printing process using a graphene-impregnated polylactic acid (G-PLA) filament to create a new type of rigid, plastic, nonconductive, and anticorrosion layer. Therefore, the possibility of 3D printing a plastic layer using FDM methods is demonstrated herein. A commercial magnet such as N35 NdFeB can be used to produce an efficient shielding film by additive manufacturing. As the coating layer thickness increases, the remanence decreases from 1.17 to 1.01 T for the G-PLA coating. Visual tests were performed after exposure to all aqueous NaCl test solutions (0.5 and 1 M), and no evidence of corrosion of the coating was obtained.\",\"PeriodicalId\":54341,\"journal\":{\"name\":\"3D Printing and Additive Manufacturing\",\"volume\":\"22 4\",\"pages\":\"0\"},\"PeriodicalIF\":2.3000,\"publicationDate\":\"2023-11-06\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"3D Printing and Additive Manufacturing\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1089/3dp.2023.0151\",\"RegionNum\":4,\"RegionCategory\":\"工程技术\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q3\",\"JCRName\":\"ENGINEERING, MANUFACTURING\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"3D Printing and Additive Manufacturing","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1089/3dp.2023.0151","RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"ENGINEERING, MANUFACTURING","Score":null,"Total":0}

引用次数: 0

摘要

本研究描述了一种3D熔融沉积建模(FDM)打印工艺，使用石墨烯浸渍的聚乳酸(G-PLA)长丝来创建一种新型的刚性、塑性、不导电和防腐层。因此，本文演示了使用FDM方法3D打印塑料层的可能性。像N35 NdFeB这样的商业磁铁可以通过增材制造来生产有效的屏蔽膜。随着涂层厚度的增加，G-PLA涂层的残余量从1.17 T降低到1.01 T。在暴露于所有NaCl水溶液(0.5和1m)后进行目测，没有发现涂层腐蚀的证据。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

Effect of Graphene-Based Coating 3D Printing Process on the Remanence and Corrosion of Sintered NdFeB Magnets

This study describes a 3D fused deposition modeling (FDM) printing process using a graphene-impregnated polylactic acid (G-PLA) filament to create a new type of rigid, plastic, nonconductive, and anticorrosion layer. Therefore, the possibility of 3D printing a plastic layer using FDM methods is demonstrated herein. A commercial magnet such as N35 NdFeB can be used to produce an efficient shielding film by additive manufacturing. As the coating layer thickness increases, the remanence decreases from 1.17 to 1.01 T for the G-PLA coating. Visual tests were performed after exposure to all aqueous NaCl test solutions (0.5 and 1 M), and no evidence of corrosion of the coating was obtained.

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

3D Printing and Additive Manufacturing Materials Science-Materials Science (miscellaneous)

CiteScore

6.00

自引率

6.50%

发文量

126

期刊介绍： 3D Printing and Additive Manufacturing is a peer-reviewed journal that provides a forum for world-class research in additive manufacturing and related technologies. The Journal explores emerging challenges and opportunities ranging from new developments of processes and materials, to new simulation and design tools, and informative applications and case studies. Novel applications in new areas, such as medicine, education, bio-printing, food printing, art and architecture, are also encouraged. The Journal addresses the important questions surrounding this powerful and growing field, including issues in policy and law, intellectual property, data standards, safety and liability, environmental impact, social, economic, and humanitarian implications, and emerging business models at the industrial and consumer scales.